Frigidaire FFRE063WAE Manual

Frigidaire Aircondition FFRE063WAE

Læs nedenfor 📖 manual på dansk for Frigidaire FFRE063WAE (20 sider) i kategorien Aircondition. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/20

Frigidaire.com USA 1-800-944-9044 Frigidaire.ca Canada 1-800-265-8352

use &care

Room Air Conditioner

16120300A25472 (July 2019)

Introduction...................................................... 2

Important Safety Instructions.................... 3

Packaging.......................................................... 7

Normal Sounds................................................ 7

Air Conditioner Features............................. 8

Care And Cleaning....................................... 15

Energy Saving Ideas................................... 15

Before You Call............................................. 16

Major Appliance Limited Warranty....... 18

Operating Instructions................................ 9

2INTRODUCTION

Welcome to our family

Model Number

Serial Number

Purchase Date

Thank you for bringing Frigidaire into your

home! We see your purchase as the

beginning of a long relationship together.

This manual is your resource for the use and

care of your product. Please read it before

using your appliance. Keep it handy for

quick reference. If something doesn’t seem

right, the troubleshooting section will help

you with common issues.

FAQs, helpful tips and videos, cleaning

products, and kitchen and home accessories

are available at www.frigidaire.com.

We are here for you! Visit our website, chat

with an agent, or call us if you need help. We

may be able to help you avoid a service visit.

If you do need service, we can get that

started for you.

Let’s make it ocial! Be sure to register your

product.

Keep your product info here so it’s easy to

ﬁnd.

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Do not store or use gasoline or other

ﬂammable vapors and liquids in the vicinity

of this or any other appliance. Read product

labels for ﬂammability and other warnings.

Prevent Accidents

WARNING

To reduce the risk of ﬁre, electrical shock, or

injury to persons when using your air

conditioner, follow basic precautions,

including the following:

• Be sure the electrical service is adequate

for the model you have chosen. This

information can be found on the serial

plate, which is located on the side of the

cabinet and behind the grille.

• If the air conditioner is to be installed in a

window, you will probably want to clean

both sides of the glass ﬁrst. If the window

is a triple-track type with a screen panel

included, remove the screen completely

before installation.

• Be sure the air conditioner has been

securely and correctly installed according

to the separate installation instructions

provided with this manual. Save this

manual and the installation instructions for

possible future use in removing or

reinstalling this unit.

• When handling the air conditioner, be

careful to avoid cuts from sharp metal ﬁns

on front and rear coils.

WARNING

Avoid ﬁre hazard or electric shock. Do not

use an extension cord or an adaptor plug.

Do not remove any prong from the power

cord.

Electrical Information

WARNING

The complete electrical rating of your new

room air conditioner is stated on the serial

plate. Refer to the rating when checking the

electrical requirements.

• Be sure the air conditioner is properly

grounded. To minimize shock and fire

hazards, proper grounding is important.

The power cord is equipped with a

three-prong grounding plug for protection

against shock hazards.

• Your air conditioner must be used in a

properly grounded wall receptacle. If the

wall receptacle you intend to use is not

adequately grounded or protected by a

time delay fuse or circuit breaker, have a

qualified electrician install the proper

receptacle.

• Do not run air conditioner without outside

protective cover in place. This could result

in mechanical damage within the air

conditioner.

• Do not use an extension cord or an

adapter plug.

Grounding type wall receptacle

Do not, under any

circumstances, cut,

remove, or bypass the

grounding prong.

Power supply cord

with 3-prong grounding

plug and current

detection device

4IMPORTANT SAFETY INSTRUCTIONS

NOTE

The power supply cord with this air

conditioner contains a current detection

device designed to reduce the risk of ﬁre.

Please refer to the section ‘Operation of

Current Device’ for details.

In the event that the power supply cord is

damaged, it cannot be repaired. It must be

replaced with a cord from the product

manufacturer.

SAFETY PRECAUTIONS

DANGER! Avoid Serious Injury or Death

• This air conditioner contains no

user-serviceable parts. Always call an

authorized Electrolux servicer for repairs.

• Do not insert or place ﬁngers or objects

into the air discharge area in the front of

the unit.

• Do not start or stop the air conditioner by

unplugging the power cord or turning o

the power at the electrical box.

• Do not cut or damage the power cord.

• If the power cord is damaged, it should

only be replaced by an authorized

Electrolux servicer.

• In the event of a malfunction (sparks,

burning smell, etc.), immediately stop the

operation, disconnect the power cord, and

call an authorized Electrolux servicer.

• Do not operate the air conditioner with

wet hands.

• Do not pull on the power cord.

• Do not drink any water that is drained

from the air conditioner.

SAFETY PRECAUTIONS

CAUTION! Avoid Injury or damage to the

unit or other property

• Provide ventilation per installation

instructions.

• Do not direct airflow at fireplaces or other

heat related sources as this could cause

flare ups or make units run excessively.

• Do not climb on or place objects on

outdoor part of the unit.

• Do not hang objects off the unit.

• Do not place containers with liquids on

the unit.

• Turn off the air conditioner at the power

source when it will not be used for an

extended period of time.

• Periodically check the condition of the

unit’s installation accessories for any

damage.

• Do not apply heavy pressure to the

radiator fins of the unit.

• Operate the unit with air filter in place.

• Do not block or cover the intake grille,

discharge area and outlet ports.

• Ensure that any electrical/electronic

equipment is one yard away from the unit.

• Do not use or store flammable gases near

the unit.

• Do not touch the metal parts of the unit

when removing the filter. Injuries can

occur when handling sharp metal edges.

• Do not use water to clean inside the air

conditioner. Exposure to water can

destroy the insulation, leading to possible

electric shock.

• When cleaning the unit, first make sure

that the power and circuit breaker are

turned off.

WARNING

FOR FLAMMABLE REFRIGERANT

• Do not use means to accelerate the

defrosting process or to clean, other than

those recommended by the manufacturer.

• Do not pierce or burn.

• Be aware that the refrigerants may not

contain an odour.

• Compliance with national gas regulations

shall be observed.

• Keep ventilation openings clear of

obstruction.

5IMPORTANT SAFETY INSTRUCTIONS

• The appliance shall be stored in a room

without continuously operating ignition

sources (for example: open flames, an

operating gas appliance) and ignition

sourcesor (for example:an operating

electric heater) close to the appliance. The

appliance shall be stored in a room

without continuously operating ignition

sources (for example: open flames, an

operating gas appliance or an operating

electric heater).

• The appliance shall be stored so as to

prevent mechanical damage from

occurring.

• A warning that the appliance shall be

stored in a well-ventilated area where the

room size corresponds to the room area

as specified for operation.

• Any person who is involved with working

on or breaking into a refrigerant circuit

should hold a current valid certificate from

an industry-accredited assessment

authority, which authorises their

competence to handle refrigerants safely

in accordance with an industry recognised

assessment specification.

• Servicing shall only be performed as

recommended by the equipment

manufacturer. Maintenance and repair

requiring the assistance of other skilled

personnel shall be carried out under the

supervision of the person competent in

the use of flammable refrigerants.

• DO NOT modify the length of the power

cord or use an extension cord to power

the unit.

• DO NOT share a single outlet with other

electrical appliances. Improper power

supply can cause fire or electrical shock.

• Please follow the instruction carefully to

handle, install, clear, service the air

conditioner to avoid any damage or

hazard. Flammable Refrigerant R32 is used

within air conditioner. When maintaining

or disposing the air conditioner, the

refrigerant (R32 or R290) shall be

recovered properly, shall not discharge to

air directly.

• No any open fire or device like switch

which may generate spark/arcing shall be

around air conditioner to avoid causing

ignition of the flammable refrigerant used.

Please follow the instruction carefully

tostore or maintain the air conditioner to

prevent mechanical damage from

occurring.

• Flammable refrigerant - R32 is used in air

conditioner. Please follow the instruction

carefully to avoid any hazard.

• The refrigerating system should not

receive maintenance, service, or repair by

any person.

• Ensure that the area is in the open or that

it is adequately ventilated before breaking

into the system or conducting any hot

work. A degree of ventilation shall

continue during the period that the work

is carried out. The ventilation should

safely disperse any released refrigerant

and preferably expel it externally into the

atmosphere.

• Check that cabling will not be subject to

wear, corrosion, excessive pressure,

vibration, sharp edges or any other

adverse environmental effects. The check

shall also take into account the effects of

aging or continual vibration from sources

such as compressors or fans.

• Under no circumstances shall potential

sources of ignition be used in the

searching for or detection of refrigerant

leaks. A halide torch (or any other

detector using a naked flame) shall not be

used. The following leak detection

methods are deemed acceptable for all

refrigerant systems. Electronic leak

detectors may be used to detect

refrigerant leaks but, in the case of

FLAMMABLE REFRIGERANTS, the

sensitivity may not be adequate, or may

need re-calibration. (Detection equipment

shall be calibrated in a refrigerant-free

area.) Ensure that the detector is not a

potential source of ignition and is suitable

for the refrigerant used. Leak detection

equipment shall be set at a percentage of

the LFL of the refrigerant and shall be

calibrated to the refrigerant employed,

and the appropriate percentage of gas

(25% maximum) is confirmed. Leak

detection fluids are also suitable for use

with most refrigerants but the use of

detergents containing chlorine shall be

avoided as the chlorine may react with

the refrigerant and corrode the copper

pipe-work.

NOTE Examples of leak detection fluids are

– bubble method,

– fluorescent method agents.

If a leak is suspected, all naked flames shall

be removed/extinguished.

If a leakage of refrigerant is found contact

local manufacter to replace unit.

IMPORTANT SAFETY INSTRUCTIONS

Plug in & press RESET

READ THIS SECTION BEFORE ATTEMPTING

TO OPERATE AIR CONDITIONER.

Unit must be upright for one hour prior to

operating.

The power supply cord contains a current

device that senses damage to the power

cord. To test your power supply cord do the

following:

1. Plug in the Air Conditioner.

2. The power supply cord will have TWO

buttons on the plug head. Press the TEST

button. You will notice a click as the

RESET button pops out.

3. Press the RESET button. Again you will

notice a click as the button engages.

4. The power supply cord is now supplying

electricity to the unit. (This is also

indicated by a light on the plug head).

Operation of Current Device

CAUTION

• This appliance is not intended for use by

persons (including children) with reduced

physical ,sensory or mental capabilities or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the

appliance by a person responsible for their

safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualified persons in

order to avoid a hazard.

• The appliance shall be installed in

accordance with national wiring

regulations.

NOTE

• Do not use this device to turn the unit on

or off.

• Always make sure the RESET button is

pushed in for correct operation.

• The power supply cord must be replaced

if it fails to reset when either the TEST

button is pushed, or it cannot be reset. A

new one can be obtained from the

product manufacturer.

• If power supply cord is damaged, it

CANNOT be repaired. It MUST be replaced

by one obtained from the product

manufacturer.

8AIR CONDITIONER FEATURES

A CB D E F G H I

ELECTRONIC CONTROL

Before you begin, thoroughly familiarize yourself with the control panel and remote as

shown below and all its functions, then follow the symbol for the functions you desire. The

unit can be controlled by the touch pad alone or with the remote.

Light Feature:

The display and all LED indicators on the

control panel of the unit can be turned o

by pressing the "Light" button on the

remote control. If any other button of the

control panel and remote control is pressed

after that, the unit will beep to indicate it

works as the corresponding direction of

pressing speciﬁc button, and the display and

LED indicators will illuminate accordingly,

but they will turn o again in 5 seconds if no

further operation.

Press the "Light" button again or unplug the

unit to cancel this setting.

Battery Size: AAA

Warning: Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc),

or rechargeable (nickel-cadmium) batteries.

Caution for ingestion. Keep out of the reach

of children.

REMOTE CONTROL

Air Conditioner Features

Turns Unit On Or O

Eco Feature

Sleep Feature

Sets Mode

FSets Fan Speed

GCheck Filter Reset Button

HActivates Timer

IRemote Temp Sensing Indicator

(Some Models)

EDisplays Temperature/time

JAdjusts Temperature Or Time

WITH DISPLAY &

REMOTE

SENSING BUTTON

STANDARD REMOTE

9OPERATING INSTRUCTIONS

NOTE

The following instructions represent the

touch pad. The same instructions can be

used for the remote control.

TO TURN UNIT ON:

PRESS ON/OFF BUTTON

DO THIS:

YOU WILL SEE:

NOTE: The unit will run in Cool mode with

Eco feature and Auto fan speed setting

when used for the ﬁrst time. With the Eco

feature, when the room temperature is below

the set temperature, the fan will continue to

run for 3 minutes after the compressor shuts

o. The fan then cycles on for 2 minutes at 10

minute intervals until the room temperature

is above the set temperature, at which time

the compressor turns back on. Eco feature

can be activated or deactivated by pressing

Eco button, but it is invalid in fan only mode.

PRESS MODE BUTTON

CHOOSE COOL

DO THIS:

AUTO FEATURE:

Note: This mode is a ﬁxed combination of

Cool mode and Auto fan speed setting. In

this mode, the fan speed can not be selected

manually.

Note: In this mode, the fan remains on all the

time with the compressor cycling on and o

when room temperature is reached.

YOU WILL SEE:

COOL FEATURE:

TO CHANGE TEMPERATURE SETTlNG:

PRESS MODE BUTTON

CHOOSE AUTO

DO THIS:

PRESS TO LOWER

PRESS TO RAISE

DO THIS:

10 OPERATING INSTRUCTIONS

Note: The fan speed can be selected among

four settings: Auto, Lo(Low), Med(Medium)

and Hi(High), unless the unit runs in "Auto"

or "Dry" mode, or the Sleep feature is

activated.

Note: Tap or hold either up ( ) or down ( )

button until the desired temperature is seen

on the display. This temperature will be

automatically maintained anywhere between

62 °F (17 °C) and 86 °F (30 °C). If you want

the display to read the actual room

temperature. See "To Operate on Fan Only"

section.

YOU WILL SEE:

Note: Fan starts at Low Speed and adjusts

to a proper speed according to the room

temperature dictates. For example, if the

room doesn't get too warm, it will stay at

the slowest speed. If the room temperature

rises quickly, such as a door being opened, it

will automatically go to the highest speed.

The fan speeds will re-adjust back to the

slowest speed as the room returns to the

original set temperature.

YOU WILL SEE:

TO ADJUST FAN SPEEDS:

YOU WILL SEE:

PRESS TO SELECT

DO THIS:

TO USE AUTO FAN FEATURE:

PRESS FAN BUTTON,

CHOOSE AUTO

DO THIS:

TO OPERATE ON FAN ONLY:

PRESS MODE BUTTON

CHOOSE FAN ONLY

DO THIS:

11OPERATING INSTRUCTIONS

Note: Use this function only when cooling is

not desired, such as for room air circulation

or to exhaust stale air on some models.

(Remember to open the vent during this

function, but keep it closed during cooling

for maximum cooling eciency.) You can

choose any fan speed you prefer.

During this function, the display will show

the actual room temperature, not the set

temperature as in the cooling mode.

Note: In this mode, the air conditioner will

work like a dehumidiﬁer, but it will cool the

room down meanwhile. The temperature

can be adjusted between 62 °F (17 °C) and

86 °F (30 °C) and fan speed will be held at

“Lo”.

Note: In this mode, the unit will select Auto

fan speed automatically, and the selected

temperature will increase by 2 °F 30 minutes

after the mode is selected. The temperature

will then increase by another 2 °F after an

additional 30 minutes. This new temperature

will be maintained for 7 hours before it

returns to the originally selected

temperature. This ends the "Sleep" mode

and the unit will continue to operate as

originally programmed. The "Sleep" mode

program can be cancelled at any time

during operation by again pressing the

"Sleep", “Fan speed” or “Mode” button.

Note: This feature is a reminder to clean the

Air Filter (See Care and Cleaning) for more

ecient operation. The LED (light) will

illuminate after 250 hours of operation. To

reset after cleaning the ﬁlter, press the

"Filter Reset" button and the light will go o.

YOU WILL SEE:

DRY MODE:

YOU WILL SEE:

PRESS MODE BUTTON

CHOOSE DRY

DO THIS:

SLEEP FEATURE:

CHECK FILTER FEATURE, YOU WILL SEE:

YOU WILL SEE:

PRESS SLEEP

BUTTON

DO THIS:

12 OPERATING INSTRUCTIONS

To delay stop(or start), press the Timer

button when the unit is power-on(or

power-o), then the "timer o" indicator(or

"timer on" indicator) will illuminate. Then

adjust timer setting, tap or hold the UP

arrow ( ) or the DOWN arrow ( ) to

change delay timer at 0.5 hour increments,

up to 10 hours, then at 1 hour increments up

to 24 hours. The setting will be conﬁrmed

automatically in 5 seconds, then the control

will count down the time(8, 7.5, 7, etc.) left,

and all other settings will remain the same

as they were before the timer setting is

conﬁrmed, until stop(or start).

This feature can be activated from the

remote control ONLY, the unit must be in a

cooling mode. To activate the remote

sensing feature, point the remote control

towards the unit and press the Remote

Sensing button. Next, use the “ ” buttons

to set the desired temperature at the

remote. (Note that the set temperature will

only be displayed on the unit itself ). The

LIGHT on the unit control will illuminate to

indicate it receives the signal. The LIGHT on

the remote control will pulse each time it

sends a signal. lt will periodically send this

signal until the feature is deactivated by

pressing the remote sensing button again. lf

the unit does not receive the remote sensing

signal during any 7 minute interval, the

Remote Sensing feature will halt until the

unit receives signal from the remote control

again. The display on the remote control

indicates the temperature at the remote

ONLY.

Setting combination of “delay stop

delay start” or “delay start delay stop”

is workable. Both "timer o" indicator and

"timer on" indicator will illuminate then. The

timer setting can be canceled by either

pressing and holding the timer button for 2

seconds, or pressing the power on/o

button at any time to turn o the unit

directly.

PRESS FILTER

RESET BUTTON

DO THIS:

TIMER: DELAY STOP/START FEATURE:

REMOTE SENSING FEATURE

(on some models):

YOU WILL SEE HOW MUCH TIME IS

CHOSEN:

PRESS UP/DOWN

BUTTONS

THEN DO THIS:

PRESS TIMER

BUTTON

FIRST DO THIS:

turn off

turn on

PRESS REMOTE

SENSING BUTTON

DO THIS:

13OPERATING INSTRUCTIONS

The Remote Sensing function can be

terminated either by pressing the Remote

Sensing button again or the main ON/OFF

button on the unit.

YOU WILL SEE:

Remote Sensing indicator

NOTE: Unit display shows the set

temperature. Remote display is actual

temperature.

TO CHANGE TEMPERATURE DISPLAY:

DO THIS:

PRESS AND HOLD THE UP/DOWN

BUTTONS SIMULTANEOUSLY

FOR 3 SECONDS

YOU WILL SEE:

Note: The control is capable of displaying

temperature in degrees Fahrenheit or

degrees Celsius.

YOU WILL SEE:

DO THIS:

PRESS

ON/OFF BUTTON

TO TURN UNIT OFF:

If the display reads "AS" , a sensor has failed.

Contact your Authorized Frigidaire Service

Center.

FAULT CODES:

Now that you have mastered the operating

procedure, here are more features in your

control that you should become familiar

with.

ADDITIONAL THINGS YOU SHOULD KNOW

NOTE

The "Cool" circuit has an automatic 3

minute time delayed start if the unit is

turned o and on quickly. This prevents

overheating of the compressor and possible

circuit breaker tripping. The fan will

continue to run during this time.

Produkt Specifikationer

Mærke:	Frigidaire
Kategori:	Aircondition
Model:	FFRE063WAE

Har du brug for hjælp?

Hvis du har brug for hjælp til Frigidaire FFRE063WAE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Aircondition Frigidaire Manualer

Frigidaire FFPH1422T1 Manual

6 Oktober 2024

Frigidaire FHPC082AB1 Manual

6 Oktober 2024

Frigidaire FFRE1233Q1 Manual

3 Oktober 2024

Frigidaire FFRA121ZAE Manual

29 September 2024

Frigidaire FRA126CT1 Manual

23 September 2024

Frigidaire FFTH122WA2 Manual

19 September 2024

Frigidaire FHPW122AC1 Manual

18 September 2024

Frigidaire FFTA1233Q2 Manual

17 September 2024

Frigidaire FHTC083WA1 Manual

17 September 2024

Frigidaire FFRE083ZA1 Manual

15 September 2024

Aircondition Manualer

Nyeste Aircondition Manualer

Daikin FXNQ63A2VEB Manual

9 April 2025

Daikin FXNQ20A2VEB Manual

9 April 2025

ARCTIC WIND 3AWH12000A Manual

4 Marts 2025

Daitsu AUD-30K-DB Manual

28 Februar 2025

Daitsu AUD 36K DB Manual

28 Februar 2025

Daitsu AUD 48K DB Manual

28 Februar 2025

Daitsu AUD 60TK DB Manual

28 Februar 2025

Daitsu AUD 42K DB Manual

28 Februar 2025

Daitsu AUD 48TK DB Manual

28 Februar 2025

Daitsu AUD 36TK DB Manual

28 Februar 2025