Fujitsu Primergy MX130 S2 Manual
Læs nedenfor 📖 manual på dansk for Fujitsu Primergy MX130 S2 (68 sider) i kategorien Server. Denne guide var nyttig for 38 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/68
Operating Manual - English
PRIMERGY MX130 S2 Server
Operating Manual
Edition September 2011
Copyright and Trademarks
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
manuals@ts.fujitsu.com.
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright © 2011 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
AMD, the AMD Arrow Logo, AMD Athlon, AMD Sempron, AMD Opteron and combinations
thereof are trademarks of Advanced Micro Devices, Inc. Other names are for informational
purposes only and may be trademarks of their respective owners.
MX130 S2 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured for general uses such as
general office use, personal use, domestic use and normal industrial use. It has
not been designed or manufactured for uses which demand an extremely high
level of safety and carry a direct and serious risk to life or body if such safety
cannot be ensured.
Operating Manual MX130 S2
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/
MX130 S2 Operating Manual
Only for the Japanese market:
Shielded LAN cables should be used in this product.
Operating Manual MX130 S2
MX130 S2 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.1 Concept and target groups for this manual . . . . . . . . . 11
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 14
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 15
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 18
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 23
4 Important information . . . . . . . . . . . . . . . . . . . . . 25
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 25
4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 33
4.3 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 37
4.5 Transporting the server . . . . . . . . . . . . . . . . . . . . 38
4.6 Environmental protection . . . . . . . . . . . . . . . . . . . 38
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 41
5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 42
5.2 Setting up the server . . . . . . . . . . . . . . . . . . . . . . 43
5.2.1 Positioning the server with stabilizers . . . . . . . . . . . . . . 44
5.2.2 Positioning the server with rubber feet . . . . . . . . . . . . . 46
5.2.2.1 Positioning the server vertically . . . . . . . . . . . . . . . 46
5.2.2.2 Positioning the server horizontally . . . . . . . . . . . . . . 48
5.2.2.3 Rotating the Fujitsu Infinity Mark . . . . . . . . . . . . . . . 49
Operating Manual MX130 S2
Contents
5.3 Connecting devices to the server . . . . . . . . . . . . . . . 50
5.4 Connecting the server to the mains . . . . . . . . . . . . . . 51
5.5 Notes on connecting/disconnecting cables . . . . . . . . . . 52
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 53
6.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 53
6.1.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.1.1.1 Control Elements . . . . . . . . . . . . . . . . . . . . . . . 54
6.1.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 54
6.1.1.3 Indicators on the drives . . . . . . . . . . . . . . . . . . . . 54
6.1.2 Rear of the server . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.2 Switching the server on and off . . . . . . . . . . . . . . . . 56
6.3 Configuring the server . . . . . . . . . . . . . . . . . . . . . 58
6.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 58
6.3.2 Configuring the SATA RAID controller . . . . . . . . . . . . . . 58
6.3.3 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 58
6.3.4 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 60
6.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 61
7 Property and data protection . . . . . . . . . . . . . . . . . . 63
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 63
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 65
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 65
8.2 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 66
8.3 Flickering stripes on monitor screen . . . . . . . . . . . . . 66
8.4 No screen display or display drifts . . . . . . . . . . . . . . . 67
8.5 No mouse pointer displayed on screen . . . . . . . . . . . . 67
8.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 67
MX130 S2 Operating Manual
Contents
8.7 Added drive reported as defective . . . . . . . . . . . . . . 68
8.8 Error message on screen . . . . . . . . . . . . . . . . . . . 68
Operating Manual MX130 S2
Contents
MX130 S2 Operating Manual 11
1 Introduction
The PRIMERGY MX130 S2 server is a server for small and medium-sized
networks and can be used in the vertical position or as a desktop model.
The PRIMERGY MX130 S2 server features exceptionally low energy
consumption, very quiet running and a compact size. As a result, it is also the
ideal solution for small offices.
Thanks to its highly developed hardware and software components, the
PRIMERGY MX130 S2 server offers a high level of data security and
availability.
Security functions in the BIOS Setup protect the data on the server against
manipulation.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY MX130 S2 Server into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
12 Operating Manual MX130 S2
Introduction
1.2 Documentation overview
More information on your PRIMERGY MX130 S2 Server can be found in the
following documents:
– "Quick Start Hardware - PRIMERGY MX130 S2" leaflet
(only included as a printed copy)
– "Quick Start Software - Quick Installation Guide" DVD booklet
(only included with the ServerView Suite as a printed copy)
– "Safety Notes and Regulations" manual
" 安全上のご注意 " for the Japanese market
– "Warranty" manual
" 保証書 " for the Japanese market
– "Returning used devices" manual and "Service Desk" leaflet
" サポー ト ＆サービス " for the Japanese market
– "PRIMERGY MX130 S2 Server Upgrade and Maintenance Manual"
– "Short Description - Mainboard D3090/D3091"
– “Description - BIOS Manual D3090/D3091"
Produkt Specifikationer
| Mærke: | Fujitsu |
| Kategori: | Server |
| Model: | Primergy MX130 S2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Fujitsu Primergy MX130 S2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Server Fujitsu Manualer
24 August 2024
21 August 2024
5 August 2024
25 Juli 2024
25 Juli 2024
24 Juli 2024
20 Juli 2024
29 April 2024
20 Februar 2024
28 November 2023
Server Manualer
- Server QNAP
- Server Bosch
- Server Acer
- Server Sony
- Server HP
- Server D-Link
- Server Asus
- Server Gigabyte
- Server Toshiba
- Server Lenovo
- Server Abus
- Server Planet
- Server Black Box
- Server TRENDnet
- Server Buffalo
- Server Medion
- Server Linksys
- Server Megasat
- Server Cisco
- Server Seagate
- Server Netgear
- Server Tripp Lite
- Server Western Digital
- Server Technics
- Server Digitus
- Server Dell
- Server MSI
- Server NEC
- Server APC
- Server LevelOne
- Server FLIR
- Server ZyXEL
- Server Eaton
- Server ELAC
- Server Synology
- Server Hikvision
- Server Monacor
- Server AVerMedia
- Server Asustor
- Server Kramer
- Server Hanwha
- Server LaCie
- Server Naim
- Server Fantec
- Server Provision-ISR
- Server Quantum
- Server Axis
- Server ACTi
- Server Digi
- Server ATen
- Server Teo
- Server Vimar
- Server Smart-AVI
- Server Intel
- Server Supermicro
- Server StarTech.com
- Server Conceptronic
- Server Rocstor
- Server IStarUSA
- Server Blackmagic Design
- Server Lindy
- Server Veritas
- Server Promise Technology
- Server Sitecom
- Server HGST
- Server AMX
- Server Intellinet
- Server Iomega
- Server Silverstone
- Server Geovision
- Server Ernitec
- Server KanexPro
- Server Gefen
- Server Moxa
- Server C2G
- Server Allnet
- Server Maxdata
- Server Matrox
- Server Valcom
- Server Freecom
- Server IoSafe
- Server Revox
- Server Luxman
- Server G-Technology
- Server Areca
- Server SEH
- Server Ibm
- Server Sonnet
- Server TAIDEN
- Server SIIG
- Server Advantech
- Server Mobotix
- Server Extron
- Server Avocent
- Server Silex
- Server Middle Atlantic
- Server In Win
- Server Sun
- Server Atlona
- Server MvixUSA
- Server Dual Bay
- Server Raidsonic
- Server EMC
- Server Infortrend
- Server Opengear
- Server EXSYS
- Server Raritan
- Server Chenbro Micom
- Server Mr. Signal
- Server Atlantis Land
- Server Lantronix
- Server NETSCOUT
- Server Origin Storage
- Server IMC Networks
Nyeste Server Manualer
9 Marts 2025
9 Marts 2025
9 Marts 2025
30 Januar 2025
30 Januar 2025
23 Januar 2025
23 Januar 2025
23 Januar 2025
23 Januar 2025
23 Januar 2025