Furman PLUGLOCK Manual


Læs nedenfor 📖 manual på dansk for Furman PLUGLOCK (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
IMPORTANT SAFETY INSTRUCTIONS:
1) Please read all instructions.
2) Keep these instructions for future reference.
3) Heed all warnings and safety instructions.
4) Follow all instructions.
5) Do not use the PLUGLOCK in or near water.
6) Always protect the power cord from being walked on or pinched particularly at receptacles, and at the point which the cord
exits the PLUGLOCK.
7) WARNING: This device must be connected to an AC outlet with a protective earth ground connection.
8) The AC plug shall remain unobstructed and readily operable.
9) WARNING: Do not expose to rain or moisture.
C A U T I O N
R I S K O F E L E C T R IC S H OC K
D O N O T O P E N
R IS Q U E D E C HO C E L E C T R IQ UE
N E PA S O UV R
IR
Core Brands / Furman /152908
INSTRUCTIONS
The PLUGLOCK is the secure solution to the “Wall Wart”
problem. Install the PLUGLOCK safely out of sight in the back
of your rig or component rack, and the five widely spaced
locking outlets secure all of your bulky transformers or tra-
ditional plugs in place. The sturdy, all steel construction and
circuit breaker protected design ensure maximum durability
while protecting your valuable electronic equipment from
power interruptions due to accidental cord disconnections.
The unique adjustable clamping system accommodates
transformers and traditional plugs from 0.4” to 2.1” above
each outlet. To adjust outlet clamps, simply turn thumbscrews
(located on rear panel) left (counterclockwise) to loosen,
adjust to your desired height, then turn thumbscrews right
(clockwise) to tighten and secure the transformer or plug in
place.
Note that the PLUGLOCK is a power distribution device only,
and offers no conditioning or surge protection functions,
making it an ideal extension to an existing Furman power
management component.
MAXIMUM LOAD:
The five outlets are protected by a circuit breaker rated at 15
Amps, which is equivalent to 1800 Watts at 120 Volts. If the
total load on the PLUGLOCK (combining all outlets) exceeds
15 Amps, the circuit breaker (located on the side panel) will
trip, cutting off power to all connected equipment. Should this
happen, reduce the load by unplugging one or more units
from the PLUGLOCK, then push the circuit breaker button in
to reset it. The PLUGLOCK is a cCSAus safety agency listed
product.
CAUTION:
Only for use with 15 Amp circuits utilizing a minimum of
14 AWG.
DIN-00036 - A
Furman, 1800 S. McDowell Blvd., Petaluma CA 94954 • www.furmansound.com • 800-472-5555
C US
© 2014 Core Brands LLC. All rights reserved. Furman is a registered trademark of Core Brands LLC a company of Nortek, Inc.


Produkt Specifikationer

Mærke: Furman
Kategori: Ikke kategoriseret
Model: PLUGLOCK

Har du brug for hjælp?

Hvis du har brug for hjælp til Furman PLUGLOCK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Furman Manualer

Furman

Furman M-10X E Manual

6 September 2024
Furman

Furman M-10LX E Manual

6 September 2024
Furman

Furman ELITE-15 DM i Manual

6 September 2024
Furman

Furman Elite-10E i Manual

6 September 2024
Furman

Furman CN-3600SE Manual

4 September 2024
Furman

Furman ASD-120 2.0 Manual

4 September 2024
Furman

Furman PLUGLOCK Manual

4 September 2024
Furman

Furman SPR-16E i Manual

4 September 2024
Furman

Furman PST-8D Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Amazon

Amazon Echo Pop Kids Manual

14 November 2024
DBX

DBX PS6 Manual

14 November 2024
DBX

DBX PMC16 Manual

14 November 2024
M-Audio

M-Audio Uno Manual

14 November 2024
Snow Joe

Snow Joe RJ207M Manual

14 November 2024
Sharp

Sharp PW-AJ1 Manual

14 November 2024
Maginon

Maginon TL-120 Manual

14 November 2024
Yamaha

Yamaha RM-WAP-16 Manual

14 November 2024