Garmin Rino 110 Manual

Garmin Navigator Rino 110

Læs nedenfor 📖 manual på dansk for Garmin Rino 110 (5 sider) i kategorien Navigator. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
Marking a Waypoint
Marking a waypoint is simply capturing your current location and
storing it in the unit’s memory. The unit must be turned on and
tracking satellites to mark a waypoint.
To mark a waypoint:
1. Press the In and hold it until the Shortcuts Thumb Stick
Menu is displayed.
2. Highlight Mark Waypoint and press the In to Thumb Stick
display the Mark Waypoint Page shown below.
Mark Waypoint Page
Name
Field
Symbol Field
3. Highlight the field and press the In. Enter Name Thumb Stick
a new name. When finished, highlight OK then press the
Thumb Stick In.
4. Highlight the Symbol Thumb Stick field and press the In.
Choose a symbol then press the In to accept Thumb Stick
the selection.
5. Highlight the OK button at the bottom of the page and press
the In to save the waypoint.Thumb Stick
Creating a Breadcrumb Trail
As you move, notice that a breadcrumb trail of your path is left on
the map. This trail is called a Track Log. You can use the track log to
retrace your steps back to a certain location.
To view your breadcrumb trail (track log):
1. Use the button to display the Map Page. Page
2. Walk away from your original location for at least
three minutes.
3. The default zoom level is 80 miles. Press the Zoom button to
zoom in to view the breadcrumb trail (track log) in detail.
Sending a Location
You can send any location that you have available in your Find ‘N
Go menu. These may be waypoints, contacts, cities, exits, or any
other data that is loaded in the unit. Below are the steps to send a
waypoint.
To send a location (waypoint) using Find ‘N Go:
1. Press the In and hold it Thumb Stick
until the Shortcuts Menu is displayed,
or press the button until the Page
Main Menu is displayed.
2. Highlight Find ‘N Go and press the
Thumb Stick Way- In. Highlight
points Thumb Stick and press the
In. Select or and Nearest By Name
press the In.Thumb Stick
3. Highlight the waypoint that you want to send and press the
Thumb Stick In to display the Waypoint Review page.
4. Highlight the Option Menu Thumb button and press the
Stick In.
5. Select Send Location Thumb Stick and press the In.
The location is sent to all Rinos on the same channel and squelch
code as you. They can then choose to that location, view the Goto
location on the map ( ), or save the location ( ).Map OK
Using Peer-to-Peer Positioning
The Rinos most unique feature is Peer-to-Peer positioning, send-
ing the location of one Rino unit to other Rino units. Peer-to-Peer
positioning allows you to track the movement of other Rino users
and even navigate to their location.
To send your location:
Press and release either the or Call Talk button. Your Rino
110 automatically sends out its location. Other Rino users
monitoring the same channel and squelch code receive this
information.
Using Find ‘N Go
Using Find ‘N Go, you can search for a waypoint and then create a
straight-line route to it from your current location.
To find and go to a waypoint:
1. Press and hold the In to access the Shortcuts Thumb Stick
Menu.
2. Highlight Find ‘N Go and press In.
3. Highlight Waypoints and press the In. Select Thumb Stick
Nearest from the pop-up menu
4. Use the Thumb Stick to select the desired waypoint from the
list and then press In to display the Information Page for that
waypoint.
5. Highlight Goto and press In to create a straight-line route to
the waypoint from your current location.
Polling a Location
If you have not heard from a contact in a while and would like to
know that contact’s current location, you may “poll” the contact’s
location. This will update that contact’s location in your Rino 110.
To poll a location:
1. Press the In and Thumb Stick
hold it until the Shortcuts Menu
is displayed, or press the Page
button until the Main Menu is
displayed.
2. Highlight Find ‘N Go and press
the In. Highlight Thumb Stick
Contacts Thumb and press the
Stick In.
3. Highlight the contact that you want to poll and press the
Thumb Stick In to display the Contact Review page.
4. Highlight the Option Menu Thumb button and press the
Stick In.
5. Select Poll Location Thumb Stick and press the In.
If you have further questions or just want to learn more about the
operation of Rino 110, refer to the Owners Manual, which provides
detailed information about all of your Rino 110’s features.
Quick Start Guide
Rino® 110
Step-by-Step Instructions
to Get You Started
(Turn this page and begin with Step 1)
Part Number 190-00251-01 Rev. C
Navigating with Your Rino 110
You can navigate to a waypoint, city, exit, or a contact’s location.
Using optional detailed maps, you can also navigate to points of
interest, addresses, and intersections.
To begin navigation using Find ‘N Go:
1. Press the In to display the Shortcuts Menu.Thumb Stick
2. Highlight Find ‘N Go Thumb Stick and press the In.
3. Highlight Waypoints and press the In. Select Thumb Stick
the desired option (by or by ), and press the Nearest Name
Thumb Stick In.
4. Highlight the desired waypoint and press the Thumb Stick In.
5. With the Waypoint Page displayed, highlight the Goto button
at the bottom of the page and press the In to Thumb Stick
begin navigation. The Navigation Page automatically opens
to guide you to your destination. See below for more
information.
Navigation Page
The two main components of the Navigation
Page are the compass ring and the pointer. As
you move, the compass ring rotates showing
your current direction of travel at the top of
the display. The pointer points toward your
destination. When the pointer is aligned with
the vertical line at the top of the compass ring,
you are on a direct course toward your destina-
tion. The unit has to be moving to navigate. If you are standing still
or moving very slowly, the navigation data may not be accurate.
Using Contacts
The first time you receive a signal from another Rino user, the New
Contact page is displayed. From the New Contact page you can
show the users location on your Map, Goto that position, select OK
to add them to your contact list, or press the
Page/Quit button to disregard the contact.
Every time you receive signals from
contacts, your map is updated showing their
new position. A Track Log of their move-
ment is created and shown on your map.
Navigation Page
New Contact Page
Polling a contact’s location
Power button:
• Press and hold to turn the
unit On/Off
• Press to adjust contrast
and backlighting
Call button:
• Press to send out Call Tone
• Sends position when
released (if enabled)
Talk button:
• Press and hold to talk
• Sends position when
released (if enabled)
Page/Quit button:
• Press to cycle through
main pages
• Used to quit or escape
menu items
Volume (V) button:
• Press to open volume
control window Microphone:
• Hold unit 3–4 inches
away when talking
Zoom/Map (Z)
button:
• From the Map Page,
press to open Zoom
control window
• From any other
page, press to
display Map Page
Speaker
Thumb Stick
• Press In to enter
highlighted options
and to confirm
messages
• Move Up, Down,
Right or Left to
move through lists,
highlight fields,
on-screen buttons,
icons, enter data,
or move the map
panning arrow
• Press In and hold
to display Shortcuts
Menu.
Send Location


Produkt Specifikationer

Mærke: Garmin
Kategori: Navigator
Model: Rino 110

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin Rino 110 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Navigator Garmin Manualer

Navigator Manualer

Nyeste Navigator Manualer