GE Café CXQD2H2PNSS Manual

GE Køleskab Café CXQD2H2PNSS

Læs nedenfor 📖 manual på dansk for GE Café CXQD2H2PNSS (3 sider) i kategorien Køleskab. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
31-2000163 Rev. 2 08-18
I. Removing the Handle
1. Locate the set screws on the handle caps (they are usually on the
less visible side).
2. Loosen the set screw on one end with the 1/8” Allen wrench while
supporting the handle. Do not remove the set screw from the
handle cap.
3. Keep supporting the handle while you loosen the set screw on the
other handle cap. Lift the handle from the fasteners on the door
and set aside.
II. Replacing a New Handle
1. Make sure the set screws are loosened. Place the handle over the
fasteners of the door (we recommend putting the screw side of the
handle toward the less visible side). Take care to support the
handle so it doesn’t fall and scratch the appliance finish. Make sure
both the handle caps are resting on the face of the door.
2. Lock one end of the handle into position by tightening the set
screw in the handle cap with the 1/8” Allen wrench. Be sure not to
over tighten.
3. Keep supporting the handle as you lock the other end of the
handle into position by tightening the set screw in the handle cap
with the 1/8” Allen wrench. Be sure not to over tighten.
Repeat these instructions on all other handles.
Instructions for Replacing Appliance Handles
Instrucciones En Español | Instructions En Français:
www.cafeappliances.com/kit-instructions
3/16” Allen Wrench
(not included)
1/8” Allen Wrench
(included with handle)
Tools You Will Need:
LOOSEN
fig. 1
fig. 2
Replacing Your Café Handles
fastener
handle cap
set screw
set screw
The handle on your appliance may have a dierent orientation than what is
shown, but the installation will be the same.
Be extra careful of the appliance finish around the handle area, as it can
scratch. During removal of the handle screws, hold onto the handle tightly
so it won’t fall and scratch the appliance. We recommend having another
person help you hold the handle in place as you remove the screws.
When the handle has been removed, check the fasteners that are
attached to the appliance front to see if they are loose. If so, tighten them
with a 3/16” Allen wrench before attaching the new handle.
Note: Fastener shape may vary by appliance.
For appliances with multiple handles, look at your current configuration
before removing the handles, and make sure the replacement handles
match that logo and set screw position.
IMPORTANT!

Produkt Specifikationer

Mærke: GE
Kategori: Køleskab
Model: Café CXQD2H2PNSS

Har du brug for hjælp?

Hvis du har brug for hjælp til GE Café CXQD2H2PNSS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køleskab GE Manualer

GE

GE GYE22HSKSS Manual

14 Oktober 2024
GE

GE Profile PSE26KBB Manual

14 Oktober 2024
GE

GE GTS18TBSWW Manual

12 Oktober 2024
GE

GE Profile PFSF5NFXWW Manual

10 Oktober 2024
GE

GE GTS22WCMCC Manual

8 Oktober 2024
GE

GE Profile Performance TNX22BRCRBB Manual

8 Oktober 2024
GE

GE Profile TPX24BIDBB Manual

6 Oktober 2024
GE

GE Profile PTS22LCPCC Manual

6 Oktober 2024
GE

GE Profile TFG28PFDBS Manual

2 Oktober 2024
GE

GE Profile PSS23LGSWW Manual

23 September 2024

Køleskab Manualer

Nyeste Køleskab Manualer

Faure

Faure FRA22800WA Manual

21 November 2024
Faure

Faure FRT23101XA Manual

21 November 2024
Faure

Faure FRT27103WA Manual

21 November 2024
Faure

Faure FRT27102XA Manual

21 November 2024
Faure

Faure FRT27102WA Manual

21 November 2024
Faure

Faure FRT27100WA Manual

21 November 2024
Eqtemp

Eqtemp ACR22GLHD Manual

20 November 2024
Eqtemp

Eqtemp ACR1011WNSF456LHD Manual

20 November 2024
Eqtemp

Eqtemp ACR31WNSF456LHD Manual

20 November 2024
SanGiorgio

SanGiorgio SB54NFXD Manual

20 November 2024