Getac S410 Manual
Læs nedenfor 📖 manual på dansk for Getac S410 (118 sider) i kategorien Laptop. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/118
Rugged Mobile Computing Solution
S410
USER MANUAL
October 17 20
TRADEMARKS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All brand and product names are trademarks or registered trademarks of
their respective companies.
NOTE
The information in this manual is subject to change without notice.
For the latest version of the manual, please visit the Getac website
at www.getac.com.
i
Table of Contents
Chapter 1 Getting Started ................................................................. 1
Getting the Computer Running ................................................ 2
Unpacking .............................................................................. 2
Connecting to AC Power ....................................................... 3
Turning On and Off the Computer ...................................... 4
Taking a Look at the Computer ................................................ 6
Front Components ................................................................. 6
Rear Components .................................................................. 7
Right- ntsSide Compone ......................................................... 8
Left-Side Components ........................................................... 9
Top-open Components ........................................................ 10
Bottom Components ........................................................... 12
Chapter 2 Operating Your Computer ............................................. 14
Using the Keyboard ................................................................. 15
Typewriter Keys ................................................................... 15
Cursor-Control Keys ............................................................. 15
Numeric Keypad ................................................................... 16
Function Keys ....................................................................... 16
Fn Key ................................................................................... 16
Hot Keys ............................................................................... 17
Windows Keys ...................................................................... 18
Using the Touchpad ................................................................. 19
Touch Gestures for Windows 10 ......................................... 20
Configuring the Touchpad .................................................. 21
Using the Touchscreen (Optional) .......................................... 22
Using Multi touch Gestures- ................................................ 23
Using the Tether (Optional) ................................................ 25
Using the Quick Buttons .......................................................... 26
Using Network and Wireless Connections ............................. 28
Using the LAN ...................................................................... 28
ii
Using the WLAN ................................................................... 29
Using the Bluetooth Feature .............................................. 31
Using the WWAN Feature (Optional) ................................ 33
Using the DVD Drive (Optional) .............................................. 37
Inserting and Removing a Disc ........................................... 38
Using the GPS Feature (Optional) ........................................... 39
Using the Fingerprint Scanner (Optional) .............................. 40
Enrolling a Fingerprint ........................................................ 40
Fingerprint Login ................................................................. 42
Using the Contactless Smart Card Reader (Optional) ............ 43
Chapter 3 Managing Power ............................................................ 44
AC Adapter ............................................................................... 45
Battery Pack .............................................................................. 46
Charging the Battery Pack .................................................. 46
Initializing the Battery Pack ................................................ 47
Checking the Battery Level ................................................. 47
Battery Low Signals and Actions ........................................ 47
Replacing the Battery Pack ................................................. 48
Hot Swapping the Battery Pack (Optional) ....................... 50
Power-Saving Tips .................................................................... 52
Chapter 4 Expanding Your Computer ............................................ 53
Connecting Peripheral Devices ............................................... 54
Connecting a USB Device .................................................... 54
Connecting a Device for USB Charging (Optional) ........... 55
Connecting a Monitor ......................................................... 56
Connecting a Serial Device (Optional) ............................... 57
Connecting an Audio Device .............................................. 57
Using Storage and Expansion Cards ....................................... 58
Using Storage Cards ............................................................ 58
Using Smart Cards ................................................................ 59
Using ExpressCards (Optional) ............................................ 60
Using PC Cards (Optional) ................................................... 61
Changing or Replacing ............................................................ 62
Replacing the Hard Disk Drive ............................................ 62
Chapter 5 Using BIOS Setup ............................................................ 63
When and How to Use ............................................................. 64
Menu Descriptions ................................................................... 65
Information Menu ............................................................... 65
Main Menu ........................................................................... 65
Advanced Menu ................................................................... 66
iii
Security Menu ...................................................................... 68
Boot Menu ........................................................................... 69
Exit Menu ............................................................................. 69
Chapter 6 Using Getac Software .................................................... 70
G-Manager ............................................................................... 71
Quick Button Definition Utility ............................................... 73
Chapter 7 Care and Maintenance ................................................... 75
Protecting the Computer ......................................................... 76
Using an Virus Strategy -Anti ............................................... 76
Using the Cable Lock ........................................................... 76
Taking Care of the Computer ................................................. 77
Location Guidelines ............................................................. 77
General Guidelines .............................................................. 77
Cleaning Guidelines ............................................................. 78
Battery Pack Guidelines ....................................................... 78
Touchscreen Guidelines ....................................................... 80
When Traveling ........................................................................ 81
Chapter 8 Troubleshooting ............................................................. 82
Preliminary Checklist ................................................................ 83
Solving Common Problems ...................................................... 84
Battery Problems . ................................................................ 84
Bluetooth Problems ............................................................. 84
Display Problems .................................................................. 85
DVD Drive Problems ............................................................ 85
Hardware Device Problems ................................................. 86
Hard Disk Drive Problems .................................................... 86
Keyboard and Touchpad Problems .................................... 87
LAN Problems ....................................................................... 87
Power Management Problems ........................................... 87
Software Problems .............................................................. 88
Sound Problems ................................................................... 88
Startup Problems ................................................................. 89
WLAN Problems ................................................................... 89
Other Problems .................................................................... 90
Resetting the Computer .......................................................... 92
System Recovery ....................................................................... 93
System Restore, Recovery, or Reset (for Windows 10
Models) ................................................................................. 93
System Recovery (a Tool for Windows 7 Models) .............. 93
Using the Driver Disc (Optional) ............................................. 96
iv
Appendix A Specifications ................................................................. 97
Appendix B Regulatory Information ................................................. 99
On the Use of the System ...................................................... 100
Class B Regulations ............................................................ 100
Safety Notices ..................................................................... 101
On the Use of the RF Device .................................................. 104
USA and Canada Safety Requirements and Notices ........ 104
European Union CE Marking and Compliance Notices ... 106
User Notification of Take-back Service ................................. 109
ENERGY STAR 6.1 ................................................................... 110
Battery Recycling .................................................................... 112
4
Turning On and Off the Computer
Turning On
1. Open the top cover by pulling the cover lifting up the cover. latch and
You can tilt the cover forward or backward for optimal viewing clarity.
2. Press the power button ( ). T should he Windows operating system
start.
5
Turning Off
When you finish a working session, you can stop the system off by turning
the power or leaving in Sleep or Hibernation mode:it
To... Do this...
Windows 10 Windows 7
Power off
(Shutdown)
Click Power Shut
down.
Use the Windows Start enu in m
the lower left and follow the
shutdown procedure.
Sleep Use one of these methods:
Press the power button.*
Close the top cover.*
Press Fn + F12.*
Click Power
Sleep.
Use one of these methods:
Press the power button.*
Close the top cover.*
Press Fn + F12.*
U Start se the Windows
m computer enu to put the
in Sleep mode.
Hibernate By default, this option is not
shown in the Start menu. If
you want to use the feature,
set up accordingly in Windows
settings.
Use the Windows enu to Start m
put the computer in Hibernation
mode.
* “ ” the action. You Sleep is the default result of can change what the
action does Windows settings.through
6
Taking a Look at the Computer
NOTE: Depending on the specific model purchased, the color and look you
of graphics document. your model may not exactly match the shown in this
CAUTION: You need to open the protective covers to access the connectors.
When not using a connector, make sure to close the cover completely for
water- dust-, and fire-, proof integrity. Engage the locking mechanism if (
existing.)
Front Components
Ref Component Description
Top Cover Latch Locks the top cover.
Stereo Speaker Sends out sound and voice from the computer.
Handle Provides a convenient way to carry the computer.
7
Rear Components
Ref Component Description
HDMI Connector Connects a HDMI monitor or TV set.
USB 3.0 Port Connects flash a USB device, such as a USB disk,
printer, digital camera, joystick, and more.
RJ- Connector 45 Connects the LAN cable.
Optional I/O
Connector
Depending on the model, the component can be
one of the following:
None
RJ- Connector 45 Connects the LAN (for LAN 2). cable
PowerShare USB
Port
C . an be used to charge mobile devices
VGA Connector
(optional)
Connects an external display monitor.
or
RS232 Serial
Connector
(optional)
Connects a serial mouse serial communication or
device.
RS232 Serial
Connector
(optional)
Connects a serial mouse serial communication or
device.
Kensington Lock Locks the computer to a station ry object for a
security.
8
Right- Side Components
Ref Component Description
Battery Pack
( )
Supplies power to your computer when external
power is not connected.
USB 2.0 Port Connects flash a USB device, such as a USB disk,
printer, digital camera, joystick, and more.
Combo Audio
Connector
Connects a set of headphones or external speakers
with amplifier
Supports a headset microphone with 4-pole TRRS
3.5mm jack.
SIM Card Slot
(optional)
Accepts a SIM card for models having the WWAN
module.
Smart Card
Reader
Accepts a smart card for additional security feature.
Storage Card
Reader
Accepts an SD card for removable storage media.
USB 3.0 Port Connects flash a USB device, such as a USB disk,
printer, digital camera, joystick, and more.
Power
Connector
Connects the AC adapter.
9
Left- Side Components
Ref Component Description
Stylus Slot For storing the stylus (optional).
Tether Hole Stylus tethered to this hole.
Multi-purpose
B ay
Depending on the model, the component can be
one of the following:
None
Second Battery
Pack ( )
Supplies power to your computer when external
power is not connected.
Super Multi
Drive
Accepts a compact disc for installing or loading
software, accessing data, and playing music/video.
PC Card Slot A . ccepts a PC card for additional functions
ExpressCard
Slot
Accepts an ExpressC . ard for additional functions
Hard Disk Drive Is the storage device that contains the operating
system, software programs, and data files.
10
Top- open Components
Ref Component Description
Microphone Receives sound and voice for the computer.
Camera Lens
(optional)
Allows you to use the camera function. When the
camera lens is in use, the LED beside it lights up.
LCD Screen Displays the output of the computer. May include the
optional touchscreen feature.
Indicators
Num Lock Lights green when Num Lock is on.
Hard Disk Blinks green when computer is reading / writing data
to the hard disk
Lights red when the optional hard disk heater is on.
11
Ref Component Description
RF (Radio
Frequency)
Lights green when the RF radio of any RF feature
(WLAN/Bluetooth/WWAN) is on.
Contactless
Smart Card
Reader
(optional)
Serves as an RFID reader/writer and an NFC reader.
Indicators
Battery Lights amber when the battery is being charged.
Lights green when battery charging is completed.
Blinks green to indicate in high -the battery’s built
temperature protection mechanism is activated.
CAUTION: Do not remove the battery during this
period.
Blinks red when the battery s capacity is below 10’ %.
Blinks amber when the battery is in an abnormal
condition.
Power Lights green when computer is on.
Blinks green when computer is Sleep modein .
P1 Button Toggles Blackout mode on or off.
Can be changed to a different function.
P 2 Button Toggles the sunlight readable mode on or off.-
Can be changed to a different function.
Power Button Turns the power on or off (Sleep mode by default) .
Fingerprint
Scanner
(optional)
Serves as the fingerprint verification, preventing
unauthorized access to your computer.
Keyboard Serves as the data input device of the computer.
Touchpad Serves as the pointing device of the computer.
13
Ref Component Description
Green light: It is safe to hot swap the battery pack.
Red light: Hot swapping is not allowed.
Blinking red light: The computer is entering
Hibernation mode.
Hard Disk
Drive Latch
Locks the hard disk drive in place.
14
Chapter 2
Operating Your
Computer
This chapter provides information about the use of the computer.
If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user, you may choose to read
only the parts containing information unique to your computer.
CAUTION:
Do not expose your skin to the computer when operating it in a very hot
or cold environment.
The computer can get uncomfortably warm when you use it in high
temperatures. As a safety precaution in such a , do not circumstance
place the computer on your lap or touch it with your bare hands for
extended periods of time. Prolonged body contact can cause discomfort
and potentially a burn.
15
Using the Keyboard
Your keyboard has all the standard functions of a full sized computer -
keyboard plus a key added for specific functions.n Fn
The standard functions of the keyboard can be further divided into four
major categories:
Typewriter keys
Cursor- control keys
Numeric keys
Function keys
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the , and lock keys for special purposes. Ctrl, , Alt Esc
The Control ) / Alternate key is normally used in combination with (Ctrl (Alt)
other keys for program specific functions. - The Escape (Esc) key is usually used
for stopping a process. Examples are exiting a program and canceling a
command. The function depends on the program you are using.
Cursor- Control Keys
Cursor-control keys are generally used for moving and editing purposes.
17
Hot Keys
Hot keys refer to a combination of keys that can be pressed any time to
activate special functions of the computer. Most hot keys operate in a cyclic
way. Each time a hot key combination is pressed, it shifts the corresponding
function to the other or next choice.
You can easily identify the hot keys with the icons imprinted on the keytop.
The hot keys are described next.
Key Description
Switches the keyboard backlight off or on (with 4-level
brightness). *
Switches the on and off.RF (radio frequency) radio
When off, all wireless modules (such as WLAN, Bluetooth,
and WWAN) cannot be used. When on, individual settings of
the module work.
Decreases the sound volume.
Increases the sound volume.
Switches the display output to
the next choice if an external
display is connected. Choices are:
LCD only
LCD + External display (Duplicate)
LCD + External display (Extend)
External display only
The hot keys are equivalent to Windows logo .key + P
Decreases the LCD brightness.
Increases the LCD brightness.
18
Key Description
Switches the touchscreen function off or on.*
Switches the touchpad off or on.function
Switches ) or the system sound output off (mute on.
Switches backlight off or on. the display
Serves as the sleep button that you can define with
Windows’ Power Options.
T N :ABLE OTE “* means select models only. ”
Windows Keys
The keyboard has two keys that perform Windows specific functions: -
Windows Logo key and Application key.
The - Windows Logo key opens the Start menu and performs software
specific functions when used in combination with other keys. The
Application key usually has the same effect as a right mouse click.
19
Using the Touchpad
CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing
so may damage the touchpad surface.
NOTE:
You can p to toggle the touchpad on or off.ress Fn+ F9 function
For optimal performance of the touchpad, keep your fingers and the
pad clean and dry. When tapping on the pad, tap lightly. Do not use
excessive force.
The touchpad is a pointing device that allows you to communicate with the
computer by controlling the location of the pointer on the screen and
making selection with the buttons.
The touchpad consists of a rectangular pad (work surface) and a left and
right buttons. To use the touchpad, place your forefinger or thumb on the
pad. The rectangular pad acts like a miniature duplicate of your display. As
you slide your fingertip across the pad, the pointer (also called cursor) on the
screen moves accordingly. When your finger reaches the edge of the pad,
simply relocate yourself by lifting the finger and placing it on the other side
of the pad.
20
Here are some common terms that you should know when using the
touchpad:
Term Action
Point Move your finger on the pad until the cursor points to the
selection on the screen.
Click Press and release the left button.
–or–
Tap gently anywhere on the pad.
Double- click Press and release the left button twice in quick succession.
–or–
Tap twice on the pad rapidly.
Drag and
drop
Press and hold the left button, then move your finger until
you reach your destination (drag). Finally, release the
button (drop) when you finish dragging your selection to
the destination. The object will drop into the new location.
–or–
Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your finger
across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.
TABLE NOTE: If you swap the left and right buttons, “tapping” on the
touchp ad as an alternative method of pressing the left button will no longer
be valid.
Touch Gestures for Windows 10
The touchpad supports touch gestures for Windows 10 such as one-finger
scrolling, two finger scrolling, pinch zoom, rotating, and others. For detailed -
information, go to Settings
Devices Mouse & touchpad Additional
mouse options
ettings Device S Settings.
21
Configuring the Touchpad
You may want to configure the touchpad to suit your needs. For example, if
you are a left-handed user, you can swap the two buttons so that you can
use the right button as the left button and vi e versa. You can also change c
the size of the on screen pointer, the speed of the pointer, and so on.-
To configure the touchpad, go to Settings
Devices
touchpadMouse &
(in Windows 10) or Control Panel
Mouse . (in Windows 7)
22
Using the Touchscreen (Optional)
NOTE: You can press Fn+F8 function to toggle the touchscreen on or off.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use your finger
or the included stylus.
Select models have a capacitive touchscreen. This type of touchscreen
responds to objects that have conductive properties, such as fingertips and a
capacitive- . tipped stylus You can navigate on the screen without using a
keyboard, touchpad mouse. , or
You can change the touchscreen sensitivity settings to suit your scenario.
Double-tap shortcut the Touch Screen Mode on Windows desktop to open
the settings menu and select one of the options (as shown below).
NOTE: If liquid is spilled on the touchscreen causing a wet area, the area will
stop responding to any inputs. For the area to function again, you must dry it.
The following table shows how you use the touchscreen to obtain equivalent
mouse functions.
Term/Action Equivalent
Mouse Function
Tap: T . ouch the screen once Click/Point
Double-tap: Touch the screen twice rapidly. Double- click
Tap and hold: Tap and hold until a popup menu appears. Right- click
Select this if you are using the
s . (Ytylus ou must use the one
supplied with your model.)
Select this if you are wearing gloves
( referring to warm gloves or work gloves,
not referring -to touchscreen capable gloves).
Select this if you prefer using
fingertips. Also, select this
when raindrops are falling
on the screen and should be
rejected as input.
25
Using the Tether (Optional)
You can purchase a stylus and tether for your computer model. Use the
t ether to attach the stylus to the computer.
1. Insert one of the tether s loop ends through the hole of the stylus (as ’
indicated by below). Then, insert the other end through the first loop
(as indicated by t. below) and pull it tigh
2. Insert the other loop end to the hook on the computer (as indicated by
below). Then, insert the stylus end through the loop (as indicated by
below) and pull it tight.
3. When not in use, store the stylus in the stylus slot.
CAUTION: Be careful the tether does not get in the way when you open or
close the DVD tray (if your model has a DVD drive) and when you connect
the computer to the office or vehicle dock.
26
Using the Quick Buttons
The Quick allow you to quickly start a Buttons program or activate a
function.
Button Description Remarks
P1 Toggles Blackout mode on or off.
In Blackout mode, the LCD backlight, keyboard/button
backlight, and LED indicators are all turned off; and
the sound is muted.
To bring the computer out of Blackout mode, press
the same button again or the power button.
Default
function
Can s a program based on your settings.tart (See
“ ” Quick Button Definition Utility in Chapter 6 for
more information.)
Alternative
functions
Can s “erve as Emergency” button if set accordingly in
the BIOS Setup program. (For setup information, see
“ ” Advanced Menu in Chapter 5.)
P2 Toggles the sunlight readable mode on or off. -
In sunlight readable mode, the LCD brightness is -
increased to the highest level. The mode automatically
ends when the brightness setting is changed, the
computer resumes from Sleep/Hibernation mode, or
the computer is restarted.
Default
function
27
Button Description Remarks
P2 Selects an ECO mode. (For setup information, see
“ ” Advanced Menu in Chapter 5.)
Pressing the button brings up the ECO menu as shown
below:
Select a mode before the ECO menu disappears. You
can select a mode by pressing the button or the same
arrow key. ECO mode will return to the default The
Off setting when AC power is connected, any power
related setting is changed, the computer resumes
from Sleep/Hibernation mode, or the computer is
restarted.
Each ECO mode (Quick, Power Saving, or Work) is a
combination of power settings that results in
diffe use the rent power consumptions. (You can
G-
Manager program to configure the ECO modes. See
“G- ” Manager in Chapter 6.)
NOTE: The button works only when using battery
power.
Alternative
functions
Can s a program according to your settings.tart (See
“Qu ” ick Button Definition Utility in Chapter 6 for
more information.)
ECO Menu
ECO Off
Quick Mode
Power Saving
Work Mode
29
Using the WLAN
The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac,
compatible with 802.11a/b/g /n.
NOTE: Do not block the antenna area.
Turning On/Off Radio the WLAN
To turn on the WLAN radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
• Press . Fn+F1
• For Windows 10
2. If you have previously turned off the WLAN radio, use one of the below
methods to turn it on.
: Click Settings Network & Internet
Airplane mode Airplane mode. Slide the switch to the Off position.
• For Windows 10
•
: Click Settings Network & Internet Wi-Fi.
Slide the switch to the Wi-Fi On position.
For Windows 7: Use either Windows Mobility Center or Getac Quick
Bar. To open Getac Quick Bar, right click the Getac Utility icon - on
Windows taskbar and select . Click the WLAN button in the Quick Bar
Quick Bar (an X over the button means the radio is currently off).
WLAN
main antenna
WLAN
auxiliary antenna
30
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode.
Connecting to a WLAN Network
1. Make sure that the WLAN function is enabled (as described above).
2. For Windows 10: Click the network icon in the lower right of the task
bar.
For Windows 7
3. In the list of available wireless networks, a network, and then click click
Connect.
: Click the Wireless Network ico on the taskbar. (An n
orange light in the icon indicates connections are available.)
4. Some networks require a network security key or passphrase. To connect
to one of those networks, ask your network administrator or Internet
service provider (ISP) for the security key or passphrase.
For more information on setting a wireless network , refer to connection
Windows online help.
NOTE: You ® -can use Intel PROSet Wireless to take full advantage of the Wi Fi
capabilities of your computer. See the Help of the utility for instructions.
33
Using the WWAN Feature (Optional)
A WWAN (Wireless Wide Area Network) uses mobile telecommunication
cellular network technologies to transfer data. The WWAN module of your
computer supports 3G and 4G LTE.
NOTE:
Your model only supports data transmission; voice transmission is not
supported.
Do not block the antenna area.
Installing a SIM Card
1. Turn off the computer and disconnect the AC adapter.
2. Open the cover of the SIM card slot.
3. Insert the SIM card into the . Make sure theslot golden contact area on
the card is facing upward and the b on the SIM card facing eveled corner
inward.
4. Close the cover.
WWAN
main antenna
WWAN
auxiliary antenna
34
Turning On/Off the WWAN Radio
To turn on the WWAN radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
• Press . Fn+F1
• For Windows 10
2. If you have previously turned off the WWAN radio, use one of the below
methods to turn it on.
: Click Settings Network & Internet
Airplane mode Airplane mode. Slide the switch to the Off position.
• Use the WWAN utility.
• For Windows 10
•
: Click Settings Network & Internet
Airplane mode. Slide the Cellular switch to the On position.
For Windows 7
: Use Getac Quick Bar. To open Getac Quick Bar,
right- click the Getac Utility icon on Windows taskbar and select
Quick Bar. Click the WWAN button in the Quick Bar (an X over the
button means the radio is currently off).
To turn off the WWAN radio:
You can turn off the WWAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode.
35
Se tting up a WWAN Connection
1. Make sure that the SIM card is inserted and the WWAN function is
enabled (as described above).
2. S ). tart the WWAN utility software (Skylight
3. You need to configure the software to match your mobile network
operator.
Select the window. button to open the User Options
4. elect S operators. Firmware and pull down the list of mobile network
36
5. From the list, s lect the name that matches your operator and firmware.e
• For the US region, firmware is required. The supported EM/MC7355
operators include ATT, Bell, Roger, Sprint, Telus, . If your and Verizon
operator is not one of them, select Generic_US_7355 in the list.
• For the he Middle East and Africa) and APAC (EMEA (Europe, t , Asia
Pacific) regions, firmware is required. The supported EM/MC7305
operators include Orange, Swisscom, Telefonica, Telstra, and
Vodafone. If your operator is not one of them, select
Generic_EMEA_APAC_7305 in the list.
6. Se lect OK to start configuring mobile broadband device. A message bar
appears on the screen to show the progress. Wait till the configuration is
completed.
CAUTION: Do not perform other tasks or shut down the computer during
the configuration process.
7. After the , you WWAN connections. configuration can use For more
information, see the online help of the software.
37
Using the DVD Drive (Optional)
Se have lect models a Super Multi drive. The drive can read from and write to
CD, DVD+, DVD RAM media.- -and DVD
CAUTION:
When inserting a , do not use force.disc
Make sure that the is correctly inserted into the tray, and then close disc
the tray.
Do not leave the tray open. Also, avoid touching the lens in the drive
tray with your hand. If the lens becomes dirty, the drive may malfunction.
Do not wipe the lens using materials with rough surface (such as paper
towel). Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser-based devices:
“Caution, Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.”
NOTE: The DVD drive is classified as a Class 1 laser product. This label is
located on the DVD drive.
NOTE: This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
38
Inserting and Removing a Disc
CAUTION (for models having the touchscreen feature) If the stylus tether is :
attached to the computer, be the tether does not get in the way careful
when you open or close the DVD tray.
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Press the eject button and the DVD tray will slide out partially. Gently
pull on it until it is fully extended.
3. To insert a , place down the in the tray with its label facing up. disc disc
Slightly press the center of the until it clicks into place.disc
To remove a disc disc b, hold the y its outer edge and lift it up from the
tray.
4. Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the tray by drive
pressing the button, you can manually release the eject disc. (See “DVD
Drive Problems ” in Chapter 8.)
Eject button
39
Using GPS Feature the (Optional)
GPS (Global Positioning System allows you to) technology pinpoint the
geographic location of the computer and use the data for navigational and
other purposes.
NOTE:
You need to install third party software to take full advantage of the -
GPS feature.
Do not block the antenna area.
You can view GPS information by running Manager program and the G-
selecting the GPS Status tab.
GPS antenna
40
Using the Fingerprint Scanner
(Optional)
CAUTION:
For optimal performance, both the scanning surface and the finger
should be clean and dry. Clean the scanning surface when needed. You
can use adhesive tape to remove dirt and oil from the scanner surface.
It is not recommended that you use the fingerprint scanner in a below -
freezing temperature. The moisture on your finger can freeze to the
scanner’s metal surface when you touch it, resulting in a failed operation.
Besides, touching freezing metal with your finger can cause frostbite.
T he fingerprint scanner (if your model has the feature) provides a strong
authentication mechanism based on fingerprint recognition. You can log on
to Windows and dismiss the lock screen with an enrolled fingerprint instead
of a password.
Enrolling a Fingerprint
NOTE: enroll You can a fingerprint only after creating a password for the
Windows user account.
For Windows 10
1. Click Settings Accounts Sign-in options.
2. On the right side under Fingerprint, click Set up.
Fingerprint scanner
41
3. Follow the onscreen instructions to complete.
For Windows 7
1. Log in to Windows as the user whose fingerprint is to be enrolled.
2. Double- click iMD Fingerprint Reader on Windows desktop.
3. In the fingerprint configuration menu, click Add another.
4. You will be asked to enter the password of the selected user. Enter the
password and click . OK
5. Place any finger of your choice on the scanner surface. Keep the finger
still until you’re asked to lift your finger and repeat the action again.
Several scans of the fingerprint are required.
NOTE: Place your finger in a natural position that matches the way you
normally hold your device.
6. When completed, click . Finish
42
NOTE: For information detailed on the program, see the program s online ’
help.
Fingerprint Login
NOTE:
The fingerprint process can take a while. This is because the system login
has to check hardware devices and security configuration before
initiating the fingerprint scanner.
The fingerprint scanner has degree readability. You can 360- place your
finger in any orientation for the scanner to recognize an enrolled
fingerprint.
With an enrolled fingerprint, the user can log on by tapping the Fingerprint
option in Windows screen and then placing the finger on the scanner.login
The user can also dismiss the lock screen with the fingerprint.
If fingerprint attempts fail three times, you will be switched to login
password . login
43
Using the Contactless Smart Card
Reader (Optional)
Select models have a contactless smart card reader module. When an RFID/NFC
card of , is placed within range the antenna (≤4 cm) the reader can:
Read/write RFID (Radio Frequency Identification) tags
Read NFC (Near Field Communication) tags
The module supports and standards. ISO15693, ISO14443A/B, Felica, Mifare
NOTE:
For optimal results when reading an RFID tag, have the tag face the /NFC
antenna in the same orientation as indicated by the icon on the exterior
of the computer.
When not using an RFID/NFC card, do not leave it within or near the
antenna area.
For enhanced applications and customization of the module, contact
your authorized Getac dealer.
The r requires NFC reade specialized applications. For further
information, ask system administrator.your
Contactless s
mart
c rard eader
antenna area
44
Chapter 3
Managing Power
Your computer operates either on external AC power or on internal battery
power.
This chapter tells you how you can effectively manage power. To maintain
optimal battery performance, it is important that you use the battery in the
proper way.
45
AC Adapter
CAUTION:
The AC adapter is designed for use with your computer only. Connecting
the AC adapter to another device can damage the adapter.
The AC power cord supplied with your computer is for use in the country
where you purchased your computer. If you plan to go overseas with the
computer, consult your dealer for the appropriate power cord.
When you disconnect the AC adapter, disconnect from the electrical outlet
first and then from the computer. A reverse procedure may damage the
AC adapter or computer.
When unplugging the connector, always hold the plug head. Never pull
on the cord.
The AC adapter serves as a converter from AC (Alternating Current) to DC
(Direct Current) power because your computer runs on DC power, but an
electrical outlet usually provides AC power. It also charges the battery pack
when connected to AC power.
The adapter operates on any voltage in the range of 100~240 V AC.
46
Battery Pack
The battery pack is the internal power source for the computer. It is
rechargeable using the AC adapter.
The operating time of a fully charged battery pack depends on how you are
using the computer. When your applications often access peripherals, you
will experience a shorter operating time.
NOTE: Care and maintenance information for the battery is provided in the
“ Battery Pack Guidelines” section in Chapter 7.
Charging the Battery Pack
NOTE:
Charging will not start if the internal temperature of the battery pack is
below 0 F) or above C ( ; the charging process will stop °C (32 ° 50 °122 °F)
if the emperature internal t of the battery pack gets above 60 °C (140 °F).
T o avoid damaging the battery under this situation, disconnect the AC
adapter and wait for the battery to return to room temperature before
charging again.
During charging, do not disconnect the AC adapter before the battery
has been fully charged; otherwise you will get a prematurely charged
battery.
The battery has a high temperature protection mechanism which limits
the maximum charge of the battery to 80% of its total capacity n t i he
event of temperature condition In such s, the battery high s. condition
will be regarded as fully charged at 80% capacity.
The battery level may automatically lessen due to the self-discharge
process (0.21 % per day), even when the battery pack is fully charged
(100 %). This happens no matter if the battery pack is installed in the
computer.
To charge the battery pack, connect the AC adapter to the computer and an
electrical outlet. The Battery Indicator ( ) on the computer glows amber
to indicate that charging is in progress.
You are advised to keep the computer power off while the battery is being
charged. When the battery is fully charged, the Battery Indicator lights
green.
47
It takes approximately2.5 to 3 hours For to fully charge one battery pack.
models having both the main battery pack and second battery pack, the two
are charged in parallel.
CAUTION: After the computer has been fully recharged, do not immediately
disconnect and reconnect the AC adapter to charge it again. Doing so may
damage the battery.
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time or
when the actual operating time of a battery pack is much less than expected.
Initializing is the process of fully charging, discharging, and then charging. It
can take several hours.
A software “ ” tool called Gauge Reset is provided for the purpose. Use the
G- Manager program and select the Battery tab to find the tool.
Checking the Battery Level
NOTE: Any battery level indication is an estimated result. The actual operating
time can be different from the estimated time, depending on how you are
using the computer.
You can find the battery icon on the Windows taskbar (lower right corner). -
The icon shows the approximate battery level.
For models having both the main battery pack and second battery pack, the
two are discharged in parallel.
Battery Low Signals and Actions
The battery icon changes appearance to display the current state of the battery.
Battery Icon Battery Level
Description
Windows 10 Windows 7
Discharging The icon shows the charge remaining in
10-percent increments until the charge
reaches the low-battery level.
49
5. Noting the orientation, insert the new battery pack all the way into the
bay. The battery latch should be engaged in the locked position ( ).
50
Hot Swapping the Battery Pack (Optional)
“Hot swapping” means you can safely replace the battery pack without
shutting down while your computer is running on battery power. This can be
done if battery power your computer has another source.
In addition to the main battery pack, select models have extra(s) which can
be one of the below configurations:
Bridge battery (internal , not user accessible) component
Second battery pack ( purpose bay, user -occupying the multi
accessible)
Bridge battery and second battery pack
Hints and Reminders
Se “e Replacing the Battery Pack for replacement instructions and note the ”
following hints and reminders on hot swapping:
Make sure battery pack to be installed is chargedthe .
The appropriate temperature range for hot swapping the battery pack is
between - - F) 5 . 21°C ( 5.8 °and 5 °C (131 °F)
Check the Battery Hot Swapping Indicator after removing a battery pack.
Re place the battery pack only when the indicator lights in green. A red
light means there is not enough extra power for you to safely hot swap
the battery pack.
Once a battery pack is removed, the display brightness level will be fixed
at a low level and cannot be adjusted.
If a charged battery pack is not inserted within the Battery 2 minutes,
Hot Swapping Indicator s in red and blink the computer enters
Hibernation mode.
52
Power-Saving Tips
Aside from your computer’s power e, you can do your enabling saving mod
part to maximize the battery’s operating time by following these suggestions.
Do not disable Power Management.
Decrease the LCD brightness to the lowest comfortable level.
Shorten the length of time before Windows turn off the display.
When not using a connected device, disconnect it.
Remove the card (such as smart card, ExpressCard, or PC card) if not using
it.
Turn off the wireless radio if you are not using the wireless module (such
as . WLAN, Bluetooth, or WWAN)
Turn off the computer when you are not using it.
Produkt Specifikationer
| Mærke: | Getac |
| Kategori: | Laptop |
| Model: | S410 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Getac S410 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Laptop Getac Manualer
28 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
15 August 2024
Laptop Manualer
- Laptop Acer
- Laptop Sony
- Laptop Samsung
- Laptop Panasonic
- Laptop LG
- Laptop Apple
- Laptop HP
- Laptop Asus
- Laptop Gigabyte
- Laptop Toshiba
- Laptop Lenovo
- Laptop Thomson
- Laptop Hannspree
- Laptop Razer
- Laptop Medion
- Laptop Haier
- Laptop Huawei
- Laptop Tripp Lite
- Laptop Packard Bell
- Laptop Microsoft
- Laptop Fellowes
- Laptop Xiaomi
- Laptop Viewsonic
- Laptop Dell
- Laptop Fujitsu
- Laptop MSI
- Laptop Honor
- Laptop ECS
- Laptop Prixton
- Laptop SPC
- Laptop GoClever
- Laptop VIZIO
- Laptop Atdec
- Laptop Hercules
- Laptop Airis
- Laptop EMachines
- Laptop Oregon Scientific
- Laptop Lexibook
- Laptop Kogan
- Laptop ADATA
- Laptop Micromax
- Laptop TechBite
- Laptop Alienware
- Laptop Sylvania
- Laptop Coby
- Laptop Evga
- Laptop Mpman
- Laptop Targa
- Laptop Peaq
- Laptop Ematic
- Laptop XPG
- Laptop Inovia
- Laptop Aplic
- Laptop Odys
- Laptop Ibm
- Laptop Compaq
- Laptop SIIG
- Laptop Jay-tech
- Laptop Vulcan
- Laptop System76
- Laptop General Dynamics Itronix
- Laptop CTL
- Laptop Everex
- Laptop Olidata
- Laptop Dynabook
- Laptop Hamilton Buhl
- Laptop AORUS
- Laptop Humanscale
- Laptop Schenker
Nyeste Laptop Manualer
5 Februar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
10 Januar 2025