Gigabyte GA-8IE2004 Manual

Gigabyte Bundkort GA-8IE2004

Læs nedenfor 📖 manual på dansk for Gigabyte GA-8IE2004 (96 sider) i kategorien Bundkort. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/96
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has "AGP
4X notch"(show below), please make sure your AGP card is AGP 4X
(1.5V).
Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/
G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X (1.5V) mode
by adjusting the jumper. The factory default for this card is 2X (3.3V). If you
install this card in GA-8IE2004 Series (or any AGP 4X/8X only) motherboards
without switching the jumper to 4X mode (1.5V), it will burn the motherboard.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X/4X mode AGP slot, but they support 2X (3.3V) only. If you
install this card in GA-8IE2004 Series (or any AGP 4X/8X only) motherboards,
it will burn the motherboard.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X (1.5V)
specification. Therefore, AG32S(G) will work fine with Intel ® 845(GE/PE) / 845
(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-8IE2004

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-8IE2004 stil et spørgsmål nedenfor, og andre brugere vil svare dig