Gigabyte GA-Z97X-UD7 TH Manual
Læs nedenfor 📖 manual på dansk for Gigabyte GA-Z97X-UD7 TH (128 sider) i kategorien Bundkort. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/128
GA-Z97X-UD7 TH
User's Manual
Rev. 1001
12ME-Z97XU7T-1001R
Motherboard
GA-Z97X-UD7 TH
May. 2, 2014
May. 2, 2014
Motherboard
GA-Z97X-UD7 TH
- 5 -
Chapter 4 Drivers Installation 89 ........................................................................................
4-1 Chipset Drivers 89 ...............................................................................................
4-2 Application Software 90 ......................................................................................
4-3 Information ..................................................................................................... 90
Chapter 5 Unique Features 91 ...........................................................................................
5-1 BIOS Update Utilities 91 .....................................................................................
5-1-1 Updating the BIOS with the Q-Flash Utility 91 .............................................................
5-1-2 Updating the BIOS with the @BIOS Utility 94 .............................................................
5-2 APP Center 95 ....................................................................................................
5-2-1 EasyTune................................................................................................................96
5-2-2 System Information Viewer 97 .....................................................................................
5-2-3 EZ Setup 98 .................................................................................................................
5-2-4 Fast Boot 103 ..............................................................................................................
5-2-5 Smart TimeLock....................................................................................................104
5-2-6 Smart Recovery 2 105 .................................................................................................
5-2-7 USB Blocker 107 .........................................................................................................
5-2-8 Smart Switch 108 ........................................................................................................
Chapter 6 Appendix 109 ....................................................................................................
6-1 ConguringAudioInputandOutput ............................................................. 109
6-1-1 Conguring2/4/5.1/7.1-ChannelAudio .................................................................109
6-1-2 ConguringS/PDIFOut ........................................................................................ 111
6-1-3 ConguringMicrophoneRecording ......................................................................112
6-1-4 Using the Sound Recorder ...................................................................................114
6-2 Troubleshooting............................................................................................ 115
6-2-1 Frequently Asked Questions ................................................................................115
6-2-2 Troubleshooting Procedure ..................................................................................116
6-3 Debug LED Codes ....................................................................................... 118
Regulatory Statements 122 ............................................................................................
Contact Us 127 ..............................................................................................................
- 6 -
Box Contents
5GA-Z97X-UD7 TH motherboard
5Motherboard driver disk
5User's Manual
5Quick Installation Guide
5Four SATA cables
5I/O Shield
5One 2-Way SLI bridge connector
Optional Items
2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)
eSATAbracket(PartNo.12CF1-3SATPW-4*R)
3.5"FrontPanelwith2USB3.0/2.0ports(PartNo.12CR1-FPX582-2*R)
HDMI-to-DVIadapter(PartNo.12CT2-HDMI01-1*R)
COMportcable(PartNo.12CF1-1CM001-3*R)
The box contents above are for reference only and the actual items shall depend on the product package you
obtain. The box contents are subject to change without notice.
- 8 -
GA-Z97X-UD7 TH Motherboard Block Diagram
Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."
LGA1150
CPU
CPUCLK+/-(100MHz)
6 USB 2.0/1.1
PCI Express Bus
PCIe CLK
(100MHz)
DMI 2.0
FDI
4 SATA 6Gb/s
x1
LAN
RJ45
Intel® GbE
LAN
Intel®
Z97
4 USB 3.0/2.0
2 SATA 6Gb/s
4 USB 3.0/2.0
Renesas®
uPD720210 Hub
Marvell®
88SE9172
Center/Subwoofer
Speaker Out
Line Out
MIC
Line In
S/PDIF Out
Rear Speaker Out
Side Speaker Out
CODEC
3 PCI Express x1
PLX® PEX8605
x1 x1x1
HDMI
DVI-D
Thunderbolt(MDP2)
Thunderbolt(MDP1)
Intel®
DSL5520
Switch
PCI Express Bus x4
or
PCI Express Bus
PCIe CLK
(100MHz)
Switch
x16x16
1 PCI Express x16
2 PCI Express x8
or
x16
2 PCI Express x4+1 PCI Express x8
or
or
DDR31600/1333MHz
Dual Channel Memory
D-Sub
Dual BIOS
LPC
Bus
PS/2 KB/Mouse
iTE®
Super I/O
SATA Express
Switch 2 SATA 6Gb/s
COM
- 9 -
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's
manual and follow these procedures:
•Prior to installation, make sure the chassis is suitable for the motherboard.
•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•When handling the motherboard, avoid touching any metal leads or connectors.
•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
•Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•Before unplugging the power supply cable from the motherboard, make sure the power supply
has been turned off.
•Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•Do not place the computer system on an uneven surface.
•Do not place the computer system in a high-temperature environment.
•Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation
- 10 -
Hardware Installation
1-2 ProductSpecications
CPU Support for Intel
®
Core
™
i7 processors/Intel
®
Core
™
i5 processors/
Intel
®
Core
™
i3 processors/Intel
®
Pentium
®
processors/Intel
®
Celeron
®
processors
in the LGA1150 package
(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)
L3 cache varies with CPU
Chipset Intel
®
Z97 Express Chipset
Memory 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
* DuetoaWindows32-bitoperatingsystemlimitation,whenmorethan4GBofphysical
memoryisinstalled,theactualmemorysizedisplayedwillbelessthanthesizeof
the physical memory installed.
Dual channel memory architecture
SupportforDDR31600/1333MHzmemorymodules
Support for non-ECC memory modules
SupportforExtremeMemoryProle(XMP)memorymodules
(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemory
modules.)
Onboard
Graphics
Integrated Graphics Processor:
- 1xD-Subport,supportingamaximumresolutionof1920x1200@60Hz
- 1xDVI-Dport,supportingamaximumresolutionof1920x1200@60Hz
* TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.
- 1xHDMIport,supportingamaximumresolutionof4096x2160@24Hzor
2560x1600@60Hz
* SupportforHDMI1.4aversion.
Intel®
DSL5520 Chip:
- 2Thunderboltports(MDP1/MDP2)supportforMini-DisplayPortandThunderbolt
monitor(s),andsupportingamaximumresolutionof3840x2160@60Hz.
* IfamonitorisconnectedtotheMDP2Thunderboltport,theDVIportwillbecome
unavailable.
* BecauseofthelimitedI/OresourcesofthePCarchitecture,thenumberofThunderbolt
devices that can be used is dependent on the number of the PCI Express and PCI devices
beinginstalled.(RefertoChapter1-7,"BackPanelConnectors,"formoreinformation.)
- Support for up to 3 displays at the same time
- Maximum shared memory of 1 GB
Audio Realtek
® ALC1150 codec
HighDenitionAudio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN Intel
®
GbELANchip(10/100/1000Mbit)
Expansion Slots 1xPCIExpressx16slot,runningatx16(PCIEX16)
* Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,
be sure to install it in the PCIEX16 slot.
1xPCIExpressx16slot,runningatx8(PCIEX8)
* ThePCIEX8slotsharesbandwidthwiththePCIEX16slot.WhenthePCIEX8slot
is populated, the PCIEX16 slot will operate at up to p10-x8 mode.
1xPCIExpressx16slot,runningatx4(PCIEX4)
* ThePCIEX4slotsharesbandwidthwiththePCIEX8andPCIEX16slots.Whenthe
PCIEX4 slot is populated, the PCIEX16 slot will operate at up to p10-x8 mode and the
PCIEX8 will operate at up to p10-x4 mode.
* Wheninstallingax8orabovecardinthePCIEX4slot,makesuretosetPCIE Slot
Conguration(CPU) in BIOS Setup to x4.(Refer to Chapter2, "BIOS Setup,"
"Peripherals,"formoreinformation.)
(ThePCIEX16,PCIEX8andPCIEX4slotsconformtoPCIExpress3.0standard.)
- 11 -
Hardware Installation
Expansion Slots 3 x PCI Express p11-x1 slots
(ThePCIExpressx1slotsconformtoPCIExpress2.0standard.)
Multi-Graphics
Technology Support for 3-Way/2-Way AMD CrossFire
™
and 2-Way NVIDIA
®
SLI
™
Technology
Storage Interface Chipset:
- 1 x SATA Express connector
- 6xSATA6Gb/sconnectors(SATA30~5)
(SATAExpressandSATA34/5connectorscanonlybeusedoneatatime.)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
Marvell
®
88SE9172 chip:
- 2xSATA6Gb/sconnectors(GSATA36~7)
- Support for RAID 0 and RAID 1
USB Chipset:
- 4xUSB3.0/2.0ports(2portsonthebackpanel,2portsavailablethrough
theinternalUSBheader)
- 6 x USB 2.0/1.1 ports available through the internal USB headers
Chipset + Renesas
®
uPD720210 USB 3.0 Hub:
- 4 x USB 3.0/2.0 ports on the back panel
Thunderbolt
Intel
®
DSL5520 Chip:
- 2 Thunderbolt ports on the back panel
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x PCIe power connector
1 x SATA Express connector
8 x SATA 6Gb/s connectors
1 x CPU fan header
1xwatercoolingfanheader(CPU_OPT)
4 x system fan headers
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.0/2.0 header
3 x USB 2.0/1.1 headers
1 x serial port header
1 x Clear CMOS jumper
1xTrustedPlatformModule(TPM)header
1 x power button
1 x reset button
1 x Clear CMOS button
2 x BIOS switches
Voltage Measurement Points
- 12 -
Hardware Installation
Back Panel
Connectors
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
1 x optical S/PDIF Out connector
2 x Thunderbolt ports
6 x USB 3.0/2.0 ports
1 x RJ-45 port
6xaudiojacks(Center/SubwooferSpeakerOut,RearSpeakerOut,SideSpeaker
Out,LineIn,LineOut,MicIn)
I/O Controller
iTE
®
I/O Controller Chip
Hardware
Monitor
System voltage detection
CPU/System/Chipset temperature detection
CPU/CPU OPT/System fan speed detection
CPU/System overheating warning
CPU/CPU OPT/System fan fail warning
CPU/CPU OPT/System fan speed control
* Whetherthefanspeedcontrolfunctionissupportedwilldependonthecooleryou
install.
BIOS 2x128Mbitash
Use of licensed AMI UEFI BIOS
Support for DualBIOS
™
PnP 1.0a, DMI 2.7, SM BIOS 2.7, ACPI 2.0
Unique Features Support for APP Center
* AvailableapplicationsinAPPCentermaydifferbymotherboardmodel.Supported
functions of each application may also differ depending on motherboard
specications.
- @BIOS
- EasyTune
- EZ Setup
- Fast Boot
- ON/OFF Charge
- Smart TimeLock
- Smart Recovery 2
- System Information Viewer
- USB Blocker
Support for Q-Flash
Support for Smart Switch
Support for Xpress Install
Bundled
Software
Norton
®
InternetSecurity(OEMversion)
Intel®
Rapid Start Technology
Intel®
Smart Connect Technology
Intel®
Smart Response Technology
Operating
System
Support for Windows 8.1/8/7
Form Factor
ATX Form Factor; 30.5cm x 24.4cm
* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout
prior notice.
* Pleasevisitthe pageonGIGABYTE'swebsitetocheckthesupportedoperatingsystem(s)Support & Downloads\Utility
for the software listed in the " " and " " columns. Unique Features Bundled Software
- 13 -
Hardware Installation
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•Make sure that the motherboard supports the CPU.
(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.(Oryoumay
locatethenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended
thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics
card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Notch
Alignment KeyAlignment Key
Notch
LGA1150 CPU
LGA1150 CPU Socket
Pin One Corner of the CPU Socket
Triangle Pin One Marking on the CPU
- 15 -
Hardware Installation
1-3-2 Installing the CPU Cooler
FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses
Intel®boxedcoolerastheexamplecooler.)
Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU
cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
Step 5:
After the installation, check the back of the
motherboard. If the push pin is inserted as the
picture above shows, the installation is complete.
Step 6:
Finally, attach the power connector of the CPU
coolertotheCPUfanheader(CPU_FAN)onthe
motherboard.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed CPU.
Step 2:
Before installing the cooler, note the direction of the
arrow sign onthemalepushpin.(Turningthe
push pin along the direction of arrow is to remove
thecooler,onthecontrary,istoinstall.)
Step 3:
Place the cooler atop the CPU, aligning the
four push pins through the pin holes on the
motherboard. Push down on the push pins
diagonally.
Step 4:
You should hear a "click" when pushing down each
push pin. Check that the Male and Female push
pins are joined closely.
(RefertoyourCPUcoolerinstallationmanualfor
instructionsoninstallingthecooler.)
Male
Push Pin
Female
Push Pin
The Top
of Female
Push Pin
Direction of
the Arrow Sign
on the Male
Push Pin
- 17 -
Hardware Installation
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs
are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this
motherboard.
DDR3 DIMM
ADDR3memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall
your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining clips
at both ends of the memory socket. Place the memory module on the
socket.Asindicatedinthepictureontheleft,placeyourngerson
the top edge of the memory, push down on the memory and insert it
vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when the
memory module is securely inserted.
Notch
- 18 -
Hardware Installation
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. Afterinstallingallexpansioncards,replacethechassiscover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your
expansioncard(s).
7. Install the driver provided with the expansion card in your operating system.
Example: Installing and Removing a PCI Express Graphics Card:
PCI Express p18-x1 Slot
PCI Express x16 Slot
•Installing a Graphics Card:
Gently push down on the top edge of the card until
it is fully inserted into the PCI Express slot. Make
sure the card is securely seated in the slot and
does not rock.
•Removing the Card:
Gently push back on the lever on the slot and then lift the card straight out from
the slot.
- 19 -
Hardware Installation
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration
•Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards
and driver version. Refer to the manual that came with your graphics cards for more information
about enabling CrossFire/SLI technology.
•When two or more graphics cards are installed, we recommend that you connect the SATA power
cable from the power supply to the ATX4P connector to ensure system stability.
(Note) Thebridgeconnector(s)maybeneededornotdependingonyourgraphicscards.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating system, go to
the NVIDIA Control Panel. Browse to the CongureSLI, Surround,
Physx Maximize 3D performance screen and ensure is enabled.
A. System Requirements
-Windows 8.1/8/7 operating system
-A CrossFire/SLI-supported motherboard with two or more PCI Express p19-x16 slots and correct driver
-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver
(CurrentGPUsthatsupport3-WayCrossFiretechnologyincludetheATIRadeon™ HD 3800, HD 4800, HD
5800 series, and AMD Radeon™ HD 6800, HD 6900, HD 7800, and HD 7900 series. For the latest GPU
supportinformation,pleaserefertotheAMDwebsite.)
-CrossFire(Note)/SLI bridge connectors
-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe
powerrequirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install CrossFireX/SLI graphics cards on the
PCIExpressx16slots.(Tosetupa2-Wayconguration,werecommendinstallingthegraphicscardsonthe
PCIEX16andPCIEX8slots.)
Step 2:
Insert the CrossFire(Note)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
C.ConguringtheGraphicsCardDriver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating system,
go to the . Browse toCatalyst Control Center Performance\AMD
CrossFireX™ and ensure the check box Enable AMD CrossFireX
is selected. If your system have more than two CrossFire cards,
select the GPU combination you want to use and click Apply.
(Availablecombinationoptionsaredependentonthenumberof
graphicscards.)
- 20 -
Hardware Installation
1-7 Back Panel Connectors
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
USB 3.0/2.0 Port
TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.
UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.
Thunderbolt Port (Note)
Use this port for Thunderbolt devices or Mini-DisplayPort monitors. Because of the limited I/O resources
of the PC architecture, the number of Thunderbolt devices that can be used is dependent on the number
of the PCI Express and PCI devices being installed. Each Thunderbolt port can daisy chain around three
devices. To connect more Thunderbolt devices, adjust the Reserved IO for Thunderbolt setting under
Peripherals\Intel(R)ThunderboltinBIOSSetup.
The two Thunderbolt ports support two DisplayPort monitors in total. The two DisplayPort monitors that
are daisy chained to the same port must be separated by a Thunderbolt device. The maximum supported
resolutionis3840x2160@60Hz,buttheactualresolutionssupportedaredependentonthemonitorbeing
used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(Theitemnamemaydifferdependingonyouroperatingsystem.Thescreenshotbelowisfrom
Windows8.1.)
After installing the DisplayPort device, make sure the default device for sound playback is the
DisplayPortdevice.(Theitemnamemaydifferfromoperatingsystem.Forexample,inWindows7,
go to Start>Control Panel>Hardware and Sound>Sound>Playback and set the DisplayPort device as
thedefaultplaybackdevice.RefertotheHDMIsettingsinformationonthecongurationdialogbox.)
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
HDMI Port
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
MasterAudio formats. It alsosupports up to 192KHz/24bit8-channel LPCM
audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported
resolution is 4096x2160@24Hz or2560x1600@60Hz, butthe actual resolutions supported are
dependent on the monitor being used.
(Note) IfamonitorisconnectedtotheMDP2Thunderboltport,theDVIportwillbecomeunavailable.
- 23 -
Hardware Installation
1-8 Onboard Buttons, Switches and LEDs
Quick Buttons
This motherboard has 3 quick buttons: power button, reset button and clear CMOS button. The power button
and reset button allow users to quickly turn on/off or reset the computer in an open-case environment when
they want to change hardware components or conduct hardware testing.
Use this button to clear the BIOS
congurationandresettheCMOSvaluestofactorydefaultswhenneeded.
PW_SW: Power button
RST_SW: Reset button
CMOS_SW: Clear CMOS Button
BIOS Switches and BIOS LED Indicators
TheBIOSswitch(BIOS_SW)allowsuserstoeasilyselectadifferentBIOSforbootuporoverclocking,helpingto
reduce BIOS failure during overclocking. The SB switch allows enabling or disabling of the Dual BIOS function.
TheLEDindicator(MBIOS_LED/BBIOS_LED)showswhichBIOSisactive.
2:BackupBIOS(BootfromthebackupBIOS)
1:MainBIOS(BootfromthemainBIOS)
BIOS Switches:
MBIOS_LED(ThemainBIOSisactive)
BBIOS_LED(ThebackupBIOSisactive)
BIOS LED Indicators:
BIOS_SW
2: Single BIOS
1: Dual BIOS
SB
BIOS_SW
SB
CMOS_SW
PW_SW
RST_SW
•Always turn off your computer and unplug the power cord from the power outlet before using
the clear CMOS button.
•Do not use the clear CMOS button when the system is on, or the system may shutdown and
data loss or damage may occur.
•Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)or
manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).
12
12
12
12
MBIOS_LED BBIOS_LED
Produkt Specifikationer
| Mærke: | Gigabyte |
| Kategori: | Bundkort |
| Model: | GA-Z97X-UD7 TH |
Har du brug for hjælp?
Hvis du har brug for hjælp til Gigabyte GA-Z97X-UD7 TH stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Gigabyte Manualer
14 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
Bundkort Manualer
- Bundkort Asus
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Sapphire
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Supermicro
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Advantech
- Bundkort Elitegroup
- Bundkort EPoX
- Bundkort AOpen
- Bundkort Raspberry Pi
Nyeste Bundkort Manualer
27 Marts 2025
6 Marts 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025
12 Februar 2025