Goldtouch Ergonomic Mouse Manual

Goldtouch mus Ergonomic Mouse

Læs nedenfor 📖 manual på dansk for Goldtouch Ergonomic Mouse (2 sider) i kategorien mus. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Pairing the Goldtouch Comfort Mouse

1. From Control Panel, double-click “Bluetooth Devices”.

2. From the Bluetooth Devices window, press the “Add” button.

3. Ensure the mouse is turned on and in pairing mode by pressing

the recessed button on the bottom of the mouse.

4. From the Add Bluetooth Devices window, please follow the

instructions, and click the checkbox next to “My device is setup and

ready to be found.”

5. Once the device is detected, select the Goldtouch Comfort

Mouse and click “Next”.

6. When prompted for a passkey, click the radio button for “Don’t

use a passkey”. and click “Next”.

7. The wizard will connect to the device and the “Add Bluetooth

Device” wizard will complete. To close the wizard, click “Finish”.

Pairing the Goldtouch Comfort Mouse

Ensure the mouse is turned on and in pairing mode by pressing the

recessed button on the bottom of the mouse

1. From the Start screen, fetch the Charms bar, click the Settings

icon, and click the Change PC Settings button.

You can summon the Charms bar’s Settings pane in any of three

ways:

Mouse: Point the cursor at the screen’s top- or bottom-right

corner.

Keyboard: Press Windows+I and press Enter.

Touchscreen: Slide your nger from the screen’s right edge

inward.

2. Press the Pairing Button on the bottom of the Mouse for 2-3 sec-

onds, until the Red Sensor light it blinking to indicate pairing mode.

3. From the Devices category, click the Add a Device icon.

4. Once the device is detected, select the Goldtouch Comfort Mouse

and click “Pair”.

5. The wizard will connect to the device and the “Add Bluetooth

Device” wizard will complete. Wait until your computer tells you

that the drivers have successfully installed before using your mouse.

To close the wizard, click “Finish”.

Goldtouch Bluetooth Mouse Install Guide

The Goldtouch Comfort Mouse is designed to utilize Microsoft

and Apple’s built-in support for Bluetooth devices. There are

no third-party drivers required to use the Goldtouch Comfort

Mouse. This Quick Install Guide will walk you through the

steps required to pair your new Bluetooth mouse with your

computer.

The Goldtouch Comfort Mouse is compatible with any embed-

ded or third-party Bluetooth adapter.

If your computer has a built-in Bluetooth adapter, then the

optional Goldtouch Bluetooth adapter is not required.

To put the mouse in pairing mode, simply press the recessed

button on the bottom of the mouse using a paperclip or the

tip of a pen.

Pairing the Goldtouch Comfort Mouse

Ensure the mouse is turned on.

1. From the Control Panel, open the “Network and Internet” section.

2. Under “Bluetooth Devices” click “Set up a Bluetooth enabled

device.

3. Press the Pairing Button on the bottom of the Mouse for 2-3 sec-

onds, until the Red Sensor light it blinking to indicate pairing mode.

4. From the Bluetooth Devices window, press the “Add” button.

5. From the Add Bluetooth Devices window, follow the instruc-

tions, and click the checkbox for “My device is setup and ready to be

found.”.

6. Once the device is detected, select the Goldtouch Comfort Mouse

and click “Next”.

7. When prompted for a passkey, click the radio button for “Don’t use

a passkey”. and click “Next”.

8. The wizard will connect to the device and the “Add Bluetooth

Device” wizard will complete. Wait until your computer tells you that

the drivers have successfully installed before using your mouse. To

close the wizard, click “Finish”.

Pairing the Goldtouch Comfort Mouse

Ensure the mouse is turned on and in pairing mode by pressing the

recessed button on the bottom of the mouse

1. From System Preferences, click the Bluetooth icon located in the

Internet and Wireless Section

2. Press the Pairing Button on the bottom of the Mouse for 2-3 sec-

onds, until the Red Sensor light it blinking to indicate pairing mode.

3. Click the button labeled “Set Up New Device”.

4. From the “Bluetooth Setup Assistant”, select the Goldtouch Com-

fort Mouse once it has been detected, then click “Continue”.

5. Upon successful completion, the screen will display “Congratula-

tions, your computer is now setup to use your Bluetooth mouse”.

6. Click “Quit.

Windows 8

Mac OS X

Windows Vista

Windows XP SP2, SP3

Pairing the Goldtouch Comfort Mouse

Ensure the mouse is turned on and in pairing mode by pressing the

recessed button on the bottom of the mouse

1. From the Start Menu, select “Devices and Printers”.

2. Press the Pairing Button on the bottom of the Mouse for 2-3 sec-

onds, until the Red Sensor light it blinking to indicate pairing mode.

3. Click “Add a Device”.

4. From the “Add a Device” window, select the Goldtouch Comfort

Mouse once it has been detected, then click “Next”.

5. Upon successful completion, the screen will display “This device

has been successfully added to this computer.”.

5. Click “Close”.

Windows 7

NOTE: For all operating systems, if a security policy requires you to enter a Passkey, enter “0000”.

Produkt Specifikationer

Mærke:	Goldtouch
Kategori:	mus
Model:	Ergonomic Mouse
Vægt:	145 g
Brugervejledning:	Ja
Batteriteknologi:	Alkaline
Formfaktor:	Højre hånd
Opbevaringstemperatur (T-T):	-20 - 55 °C
Driftstemperatur (T-T):	0 - 40 °C
Anbefalet brug:	PC
Forbindelsesteknologi:	Trådløs
Strømkilde:	Batterier
LED-indikatorer:	Ja
Batteritype:	AAA
Antal understøttede batterier:	2
Enhedsgrænseflade:	Bluetooth
Formål:	Kontor
Bevægelsesdetekteringsteknologi:	Optisk
Rulle type:	Hjul
Antal knapper:	3
Bevægelsesopløsning:	1000 dpi
Antal rullehjul:	1
Frekvensbånd:	2.4 GHz
Modtager inkluderet:	Ingen
Understøttede Windows-operativsystemer:	Ja
Understøttede Mac-operativsystemer:	Ja
Understøttede Linux-operativsystemer:	Ja
Musens dimensioner (BxDxH):	80 x 114 x 52 mm
Antal produkter inkluderet:	1 stk
Rul:	Ja
USB påkrævet:	Ja