Grundig GKNI56930FN Manual

Grundig Køleskab GKNI56930FN

Læs nedenfor 📖 manual på dansk for Grundig GKNI56930FN (80 sider) i kategorien Køleskab. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/80
58 6920 0000/AA
GKNI56930FN - GKNI6950FHN
EN / IT / RO
Refrigerator
User Manual
Frigorifero
Manuale utente
Frigider
Manual de instrucţiuni
3
IT
RO
A
A
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
Dear Customer,
Please read this manual before using the product.
Thank you for choosing this product. We would like you to achieve the optimal
efficiency from this high quality product which has been manufactured with
state of the art technology. To do this, carefully read this manual and any other
documentation provided before using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way, you will
protect yourself and your product against the dangers that may occur.
Keep the user manual. Include this guide with the unit if you hand it over to
someone else.
The following symbols are used in the user guide:
Hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its
surroundings
Important information or useful tips on operation.
Read the user manual.
4
1.Safety Instructions 5
1.1 Purpose of usage .............................5
1.2 Safety of children, vulnerable
persons and pets ...........................................5
1.3 Electrical safety ............................... 6
1.4 Handling Safety .............................. 6
1.5 Installation Safety .......................... 6
1.6
Operational safety ................ 7
1.7 Maintenance and cleaning
safety ................................................................ 9
1.8HomeWhiz .......................................... 9
1.9 Lighting .............................................. 9
2.Environmental
instructions 10
2.1 Compliance with the WEEE Directive
and Disposing of the Waste Product: 10
2.2 Compliance with RoHS Directive ..10
2.3 Package information..........................10
3.Your Refrigerator 11
4.Installation 12
4.1Points to be paid attention to when
the relocation of the refrigerator ........ 12
4.2 Electrical connection ......................... 12
4.3 Disposing of the packaging ............13
4.4 Disposing of your old refrigerator 13
4.5 Placing and Installation .................... 13
5.Preparation 14
6.Operating the product 17
6.1.Blue light/VitaminZone ....................19
6.2.Defrosting .............................................19
6.3.Placing the food ..................................20
6.4.Changing the illumination lamp ..20
6.5.The dairy (cold storage) bin ...........20
7.Maintenance and cleaning 21
8.Troubleshooting 22
5
IT
RO
1.Safety Instructions
This section includes the safety
instructions necessary to prevent
the risk of personal injury or
material damage.
Our company shall not be held
responsible for damages that may
occur if these instructions are not
observed.
Installation and repair operations
shall always be performed by
Authorized Service.
Always use genuine spare parts
and accessories.
Original spare parts will be
provided for 10 years, following the
product purchasing date.
Do not repair or replace any
part of the product unless specified
expressly in the user manual.
Do not perform any modifications
on the product.
1.1 Purpose of usage
This product is not intended for
commercial use and it shall not be
used out of its intended purpose.
This product is intended for opera-
ting interiors, such as households or
similar.
For example;
- In the staff kitchens of the stores,
offices and other working environ-
ments,
- In farm houses,
- In the units of hotels, motels or
other resting facilities that are used by
the customers,
- In hostels, or similar environments,
- In catering services and similar
non-retail applications.
This product shall not be used in
open or enclosed external environ-
ments such as vessels, balconies or
terraces. Exposing the product to
rain, snow, sunlight and wind may
cause risk of fire.
1.2 Safety of children,
vulnerable persons and pets
This product may be used by
children aged 8 years and older
and persons with underdeveloped
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a the product safe way and the
hazards involved.
Children between 3 and 8 years
are allowed to put and take out
food to/from the cooler product.
Electrical products are dangerous
for children and pets. Children
and pets must not play with,
climb on, or enter the product.
Cleaning and user maintenance
should not be performed by
children unless there is someone
overseeing them.
Keep the packaging materials
away from children. Risk of injury
and suffocation.
Before disposing of old products
that shall not be used any more:
1. Unplug the power cord from the
mains socket.
2. Cut the power cord and remove it
from the appliance together with
the plug.
6
3. Do not remove the racks and
drawers from the product to prevent
children from getting inside the
appliance.
4. Remove the doors.
5. Store the product so that it shall not
be tipped over.
6. Do not allow children to play with the
scrapped product.
Do not dispose of the product
by throwing it into fire. Risk of
explosion.
If there is a lock available in the
product’s door, keep the key out of
children's reach.
1.3 Electrical safety
The product shall not be plugged
into the outlet during installation,
maintenance, cleaning, repair, and
transportation operations.
If the power the cord is damaged,
it shall be replaced by authorized
service only to avoid any risk that
may occur.
Do not tuck the power cord under
the product or to the rear of the
product. Do not put heavy items
on the power cord. The power cord
should not be bent, crushed, and
come into contact with any heat
source.
Do not use an extension cord,
multi-plug or adaptor to operate
your product.
Portable multi sockets or portable
power supplies may overheat and
cause fire. Thus, do not have a
multi-plug behind or in the vicinity
of the product.
The plug shall be easily accessible.
If this is not possible, a mechanism
that meets the electrical legislation
and that disconnects all terminals
from the mains (fuse, switch, main
switch, etc.) shall be available on the
electrical installation.
Do not touch the plug with wet hands.
When unplugging the appliance, don't
hold the power cord, but the plug.
1.4 Handling Safety
This product is heavy, do not handle it
by yourself.
Do not hold the product from its door
while handling the product.
Be careful not to damage the cooling
system and the pipes while handling
the product. Do not operate the
product if the pipes are damaged, and
contact an authorized service.
1.5 Installation Safety
Contact the Authorized Service for
the product's installation. To prepare
the product for installation, see
the information in the user guide
and make sure the electric and
water utilities are as required. If
the installation is not suitable, call
a qualified electrician and plumber
to have them make the necessary
arrangements. Otherwise, electric
shock, fire, issues with the product or
injuries may occur.
Check for any damage on the product
before installing it. Do not have the
product installed if it is damaged.
Place the product on a level and
hard surface and balance with the
adjustable legs. Otherwise, the
refrigerator may tip over and cause
injuries.
The product shall be installed in a
dry and ventilated environment. Do
not keep carpets, rugs or similar
floor covers under the product. This
may cause risk of fire as a result of
inadequate ventilation!
7
IT
RO
Do not block or cover ventilation
holes. Otherwise, power
consumption may be increased and
damage to your product may occur.
Do not connect the product to
supply systems such as solar
power supplies. Otherwise,
damage to your product may occur
as a result of the abrupt voltage
fluctuations!
The more refrigerant a refrigerator
contains, the bigger its installation
room shall be. In very small rooms,
a flammable gas-air mixture may
occur in case of a gas leak in the
cooling system. At least 1 m³ of
volume is required for each 8
grams of refrigerant. The amount
of the refrigerant available in your
product is specified in the Type
Label.
The installation place of the
product shall not be exposed to
direct sunlight and it shall not be in
the vicinity of a heat source such as
stoves, radiators, etc.
If you cannot prevent installation of
the product in the vicinity of a heat so-
urce, you shall use a suitable insulati-
on plate and the minimum distance to
the heat source shall be as specified
below.
- At least 30 cm away from heat
sources such as stoves, heating units
and heaters, etc.,
- And at least 5 cm away from
electric ovens.
Your product has the protection
class of I. Plug the product in a
grounded socket that conforms
with the Voltage, Current and
Frequency values specified in the
type label. The socket outlet shall
be equipped with a fuse with a
rating of 10 A – 16 A. Our company
shall not be responsible for the
damages that shall be incurred as
a result of operating the product
without ensuring ground and
electrical connections made as
per local or national regulations.
The product's power cable must
be unplugged during installation.
Otherwise, risk of electric shock
and injury may occur!
Do not plug the product to loose,
broken, dirty, greasy sockets or
sockets that has come out their
seats or sockets with a risk of
water contact.
Place the power cord and hoses
(if available) of the product so
that they shall not cause a risk of
tripping over.
Penetration of humidity to live
parts or to the power cord may
cause short circuit. Thus, do
not use the product in humid
environments or in areas
where water may splash (e.g.
garage, laundry room, etc.)
If the refrigerator is wet by
water, unplug it and contact an
authorized service.
Do not connect your refrigerator
to power saving devices. These
systems are harmful for the
product.
1.6
Operational safety
Do not use chemical solvents
on the product. These materials
contain an explosion risk.
In case of a failure of the product,
unplug it and do not operate until
it is repaired by the authorized
service. There is a risk of electric
shock!
8
Do not place a source of flame (e.g.
candles, cigarettes, etc.) on the
product or in the vicinity of it.
Do not get on the product. Risk of
falling and injury!
Do not cause damage to the pipes of
the cooling system using sharp and
piercing tools. The refrigerant that
sprays out in case of puncturing the
gas pipes, pipe extensions or upper
surface coatings may cause irritation
of skin and injuries of the eyes.
Do not place and operate electric
appliances inside the refrigerators/
deep freezer unless it is advised by
the manufacturer.
Do not jam any parts of your hands or
your body to the moving parts inside
the product. Be careful to prevent
jamming of your fingers between the
refrigerator and its door. Be careful
while opening or closing the door if
there are children around.
Do not put ice cream, ice cubes or
frozen food to your mouth as soon as
you take them out of the freezer. Risk
of frostbite!
Do not touch the inner walls, metal
parts of the freezer or food kept
inside the refrigerator with wet
hands. Risk of frostbite!
Do not place soda cans or cans and
bottles that contain fluids that may be
frozen to the freezer compartment.
Cans or bottles may explode. Risk of
injury and material damage!
Do not use or place materials
sensitive against temperature
such as flammable sprays,
flammable objects, dry ice or other
chemical agents in the vicinity of
the refrigerator. Risk of fire and
explosion!
Do not store explosive materials
such as aerosol cans with flammable
materials inside the product.
Do not place cans containing fluids
over the product. Splashing of water
on an electrical part may cause the
risk of an electric shock or a fire.
This product is not intended for
storage and cooling of medicines,
blood plasma, laboratory
preparations or similar materials
and products that are subject to the
Medical Products Directive.
If the product is used against its
intended purpose, it may cause
damage to or deterioration of the
products kept inside.
If your refrigerator is equipped with
blue light, do not look at this light
with optical devices. Do not stare
directly at UV LED light for a long
time. Ultraviolet rays may cause eye
strain.
Do not fill the product with more food
than its capacity. Injuries or damages
may occur if the contents of the
refrigerator falls when the door is
opened. Similar problems may occur
when an object is placed over the
product.
Ensure that you have removed any ice
or water that may have fallen to the
floor to prevent injuries.
Change the locations of the racks/
bottle racks on the door of your
refrigerator while the racks are
empty only. Danger of physical injury!
Do not place objects that may fall/
tipped over on the product. These
objects may fall while opening or
closing the door and cause injuries
and/or material damages.
Do not hit or exert excessive pressure
on glass surfaces. Broken glass
may cause injuries and/or material
damages.
9
IT
RO
The cooling system in your product
contains R600a refrigerant.
The refrigerant type used in the
product is specified in the the
type label. This gas is flammable.
Therefore, be careful not to
damage the cooling system and
the pipes while operating the
product. In case of damage to the
pipes;
- do not touch the product or the
power cord,
- Keep the product away from po-
tential sources of fire that may cause
the product to catch fire.
- ventilation the area where the pro-
duct is placed. Do not use a fan.
- Contact authorized service.
If the product is damaged and
you observe gas leak, please stay
away from the gas. Gas may cause
frostbite if it contacts your skin.
1.7 Maintenance
and cleaning safety
Do not pull by the door handle if
you shall move the product for
cleaning purposes. Handle may
cause injuries if it is pulled too
hard.
Do not clean the product by
spraying or pouring water on the
product and inside the product.
Risk of electric shock and fire.
Do not use sharp or abrasive
tools to clean the product. Do not
use materials such as household
cleaning agents, detergents, gas,
gasoline, alcohol, wax, etc.
Use cleaning and maintenance
agents that are not harmful for
food only inside the product.
Do not use steam or steamed
cleaning materials for cleaning the
product and thawing the ice inside
it. Steam contacts the live areas in
your refrigerator and causes short
circuit or electric shock!
Take care to keep water away from
the electronic circuits or lighting
of the product.
Use a clean, dry cloth to wipe the
dust or foreign material on the
tips of the plugs. Do not use a wet
or damp piece of cloth to clean
the plug. Otherwise, risk of fire or
electric shock may occur.
1.8HomeWhiz
(May not be applicable for all
models)
Follow the safety warnings even
if you are away from the product
while operating the product via
HomeWhiz app. Also, pay attention
to the warnings in the app.
1.9 Lighting
(May not be applicable for all
models)
Contact an authorized service
when you shall replace the LED /
bulb using for lighting.
10
2.1 Compliance with the
WEEE Directive and Disposing
of the Waste Product:
This product complies with EU
WEEE Directive (2012/19/EU). This
product bears a classification symbol
for waste electrical and electronic
equipment (WEEE).
This symbol indicates that
this product shall not be
disposed with other
household wastes at the end
of its service life. Used device
must be returned to offical collection
point for recycling of electrical and
electronic devices. To find these
collection systems please contact to
your local authorities or retailer
where the product was puchased.
Each household performs important
role in recovering and recycling of old
appliance. Appropriate disposal of
used appliance helps prevent
potential negative consequences for
the environment and human health.
2. Environmental instructions
2.2 Compliance with
RoHS Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
2.3 Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do not
dispose of the packaging materials
together with the domestic or other
wastes. Take them to the packaging
material collection points designated
by the local authorities.
11
IT
RO
3. Your Refrigerator
C
Figures that take place in this instruction manual are schematic and
may not correspond exactly with your product. If the subject parts are
not included in the product you have purchased, then it is valid for other
models.
*May not be available in all models
1. Top door shelves
2. Egg section
3. Adjustable door shelves
4. Bottle shelf
5. Freezer drawers
6. Salad Crisper
7. The dairy (cold storage) bin
8. Wine rack
9. Adjustable shelves
10. Fan
11. Controller display&Light
1
2*
3*
4
5
6
7
8*
9
11*
10*
12*
3*
4
5
6
7
8*
9
11* 10*
12
4. Installation
B The manufacturer will not
be liable for any event caused by
disregarding the information supplied
in this user manual.
4.1Points to be paid attention
to when the relocation
of the refrigerator
1. Your refrigerator should be
unplugged.Before transportation
of your refrigerator, it should be
emptied and cleaned.
2. Before it is re-packaged, shelves,
accessories, crisper, etc. inside your
refrigerator should be fixed with
adhesive tape and secured against
impacts. Package should be bound
with a thick tape or sound ropes
and the transportation rules on the
package should be strictly observed.
3. Original packaging and foam
materials should be kept for future
transportations or moving.
Before you start the refrigerator,
Check the following before you start
to use your refrigerator:
1. Clean the interior of the
refrigerator as recommended in the
Maintenance and cleaning” section.
2. Connect the plug of the refrigerator
to the wall socket. When the fridge
door is opened, fridge internal lamp
will turn on.
3. When the compressor starts to
operate, a sound will be heard. The
liquid and gases sealed within the
refrigeration system may also give
rise to noise, even if the compressor
is not running and this is quite
normal.
4. Front edges of the refrigerator may
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
4.2 Electrical connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
The connection must be in
compliance with national regulations.
The power plug must be easily
accessible after installation.
Electrical safety of your
refrigerator shall be guaranteed
only if the earth system in your
house complies with standards.
The voltage stated on the label
located at left inner side of your
product should be equal to your
network voltage.
Extension cables and multi plugs
must not be used for connection.
B A damaged power cable must
be replaced by a qualified electrician.
B Product must not be operated
before it is repaired! There is the risk
of electric shock!
Read the “Safety Instructions”
section first!
13
IT
RO
4.3 Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose of them by
classifying them in accordance with
the waste instructions stated by your
local authorities. Do not throw away
with regular house waste, throw
away on packaging pick up spots
designated by the local authorities.
The packing of your refrigerator is
produced from recyclable materials.
4.4 Disposing of your
old refrigerator
Dispose of your old refrigerator
without giving any harm to the
environment.
You may consult your authorized
dealer or waste collection center
of your municipality about the
disposal of your refrigerator.
Before disposing of your refrigerator,
cut off the electric plug and, if there
are any locks on the door, make them
inoperable in order to protect children
against any danger.
4.5 Placing and Installation
A If the entrance door of the
room where the refrigerator will be
installed is not wide enough for the
refrigerator to pass through, then
carefully remove the doors of your
refrigerator and pass it sideways
through the door.
1. Install your refrigerator to a place
that allows ease of use.
2. Keep your refrigerator away from
heat sources, humid places and
direct sunlight.
3. There must be appropriate air
ventilation around your refrigerator
in order to achieve an efficient
operation. If the refrigerator is to be
placed in a recess in the wall, there
must be at least 5 cm distance with
the ceiling and at least 5 cm with the
wall. Do not place your product on
the materials such as rug or carpet.
4. Place your refrigerator on an even
floor surface to prevent jolts.
5. This product cannot be used in
rooms where the temperature drops
below 5°C.
6. Your product requires adequate air
circulation to function efficiently.
If the product will be placed in
an alcove, remember to leave at
least 5 cm clearance between the
product and the ceiling, rear wall
and the side walls.If the product will
be placed in an alcove, remember
to leave at least 5 cm clearance
between the product and the ceiling,
rear wall and the side walls. Check
if the rear wall clearance protection
component is present at its location
(if provided with the product). If the
component is not available, or if it
is lost or fallen, position the product
so that at least 5 cm clearance shall
be left between the rear surface
of the product and the wall of the
room. The clearance at the rear is
important for efficient operation of
the product.
WARNING:
Do not locate extension
sockets or charging
transformers/power supplies or
Lithium-Iron battery operated
products adjacent to the compressor
as they could overheat.
14
5.Preparation
Your refrigerator should be
installed at least 30 cm away from
heat sources such as hobs, ovens,
central heater and stoves and at
least 5 cm away from electrical
ovens and should not be located
under direct sunlight.
The ambient temperature of
the room where you install your
refrigerator should at least be
-5°C. Operating your refrigerator
under cooler conditions is not
recommended with regard to its
efficiency.
Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
If two refrigerators are to be
installed side by side, there should
be at least 2 cm distance between
them.
When you operate your
refrigerator for the first time,
please observe the following
instructions during the initial six
hours.
The door should not be opened
frequently.
It must be operated empty without
any food in it.
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings
in the “Recommended solutions
for the problems” section.
Original packaging and foam
materials should be kept for
future transportations or moving.
The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption of
the appliance. Thus any contact with
the sensor(s) must be avoided.
In some models, the instrument
panel automatically turns off 5
minutes after the door has closed. It
will be reactivated when the door has
opened or pressed on any key.
Due to temperature change as a
result of opening/closing the product
door during operation, condensation
on the door/body shelves and the
glass containers is normal
Read the “Safety Instructions” section first!
15
IT
RO
Reversing the doors
Proceed in numerical order
A
B
C
A
B
C
D
16
Reversing the doors
Proceed in numerical order
NOTE :The specified energy consumption is based on a cabinet depth of 575mm.
The product will work properly at a cabinet depth of 560mm also however it
consumes slightly more energy.
min. 200 cm 2
No
wooden
back wall
min. 200 cm 2
1943,5-1944,5 mm
min. 714 mm
min.
560
mm
≤ 17
160 mm
479 mm 479 mm
76 mm 186 mm
544 mm
19
IT
RO
6.2.Defrosting
A) Fridge Compartment
The fridge compartment defrosts
automatically. The defrosting water
runs to the drain tube via a collection
container at the back of the appliance
(1). (see diagram) During defrosting
water droplets may form at the back
of the fridge compartment where
concealed evaporator is located.
Some droplets may remain on the
liner and refreeze when defrosting
is completed. Do not allow items in
the fridge to touch the back wall as
the water droplets will make them
wet. Do not use pointed or sharp
edged objects such as knives, forks
to remove the droplets which have
frozen.
If at any time the defrost water does
not drain from the collection channel,
check to ensure that no food particles
have blocked the drain tube. The
drain tube can be cleared by pushing
the special plastic plunger provided
down the drain tube (2). If the frost
layer reaches about 1/4”(7 mm),
reduce the setting (i.e. from 4 to 1) to
restart automatic defrosting.
6.1.Blue light/VitaminZone
*May not be available in all models
For the blue light,
Fruits and vegetables stored in the
crispers that are illuminated with a blue
light continue their photosynthesis by
means of the wavelength effect of blue
light and thus preserve their vitamin
content.
For VitaminZone,
Fruits and vegetables stored in crispers
illuminated with the VitaminZone
technology preserve their vitamins
for a longer time thanks to the blue,
green, red lights and dark cycles, which
simulate a day cycle.
If you open the door of the
refrigerator during the dark period
of the VitaminZone technology, the
refrigerator will automatically detect
this and enable the blue-green or red
light to illuminate the crisper for your
convenience. After you have closed the
door of the refrigerator, the dark period
will continue, representing the night
time in a day cycle.
25
IT
RO
DISCLAIMER / WARNING
Some (simple) failures can be adequately
handled by the end-user without any safety
issue or unsafe use arising, provided that
they are carried out within the limits and in
accordance with the following instructions
(see the “Self-Repair” section).
Therefore, unless otherwise authorized
in the “Self-Repair” section below,
repairs shall be addressed to registered
professional repairers in order to avoid
safety issues. A registered professional
repairer is a professional repairer that has
been granted access to the instructions
and spare parts list of this product by the
manufacturer according to the methods
described in legislative acts pursuant to
Directive 2009/125/EC.
However, only the service agent (i.e.
authorized professional repairers)
that you can reach through the phone
number given in the user manual/
warranty card or through your
authorized dealer may provide service
under the guarantee terms. Therefore,
please be advised that repairs by
professional repairers (who are not
authorized by Grundig) shall void the
guarantee.
Self-Repair
Self-repair can be done by the end-user
with regard to the following spare parts:
door handles,door hinges, trays, baskets
and door gaskets (an updated list is also
available in support.grundig.com as of 1st
March 2021).
Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the
instructions in the user manual for self-repair
or which are available in support.grundig.
com. For your safety, unplug the product
before attempting any self-repair.
Repair and repair attempts by end-users
for parts not included in such list and/
or not following the instructions in the
user manuals for self-repair or which are
available in support..com, might give raise
to safety issues not attributable to Grundig,
and will void the warranty of the product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned
list of spare parts, contacting in such
cases authorized professional repairers
or registered professional repairers. On
the contrary, such attempts by end-users
may cause safety issues and damage
the product and subsequently cause fire,
flood, electrocution and serious personal
injury to occur.
By way of example, but not limited to,
the following repairs must be addressed
to authorized professional repairers
or registered professional repairers:
compressor, cooling circuit, main
board,inverter board, display board, etc.
The manufacturer/seller cannot be held
liable in any case where end-users do not
comply with the above.
The spare part availability of the refrigerator
that you purchased is 10 years.
During this period, original spare parts will
be available to operate the refrigerator
properly
The minimum duration of guarantee of
the refrigerator that you purchased is 24
months.
This product is equipped with a lighting
source of the «G» energy class.
The lighting source in this product
shall only be replaced by professional
repairers.
1
IT
RO
INFORMAZIONI
C
Le informazioni sul modello memorizzate nella banca dati dei
prodotti possono essere consultate sul seguente sito web,
cercando l'identificativo del modello (*) presente sull'etichetta
energetica.
https://eprel.ec.europa.eu/
A
A
(*)
MODEL IDENTIFIER
SUPPLIER’S NAME
Gentile Cliente,
cortesemente leggi il presente manuale prima di iniziare ad usare il prodotto.
Ti ringraziamo per aver scelto questo prodotto. Vorremmo che il prodotto, che
è stato realizzato con la tecnologia più avanzata, ti possa offrire l’efficienza
ottimale. Per questo, prima di utilizzare il prodotto leggi attentamente questo
manuale e qualsiasi altra documentazione fornita e conservali per riferimenti
futuri.
Presta particolare attenzione alle informazioni e alle avvertenze contenute
nel manuale utente. In questo modo proteggerai te stesso e il tuo prodotto da
possibili pericoli.
Conserva il manuale utente. Se dovessi consegnare il prodotto a qualcun altro,
non dimenticare di includere questa guida.
Nella guida utente sono utilizzati i seguenti simboli:
pericolo che potrebbe causare morte o lesioni.
AVVISO Un pericolo che potrebbe causare danni materiali al prodotto o
all'ambiente circostante
Informazioni importanti o suggerimenti utili relativamente al
funzionamento.
Leggi il manuale utente.
4
per i bambini entrare nel prodotto.
4. Rimuovere gli sportelli.
5. Tenere il prodotto in modo che
non si ribalti.
6. Non permettere ai bambini di
giocare con il vecchio prodotto.
Non gettare mai il prodotto nel
fuoco per smaltirlo. Rischio di
esplosione!
Se sulla porta del prodotto è
presente una serratura, la chiave
deve essere tenuta fuori dalla
portata dei bambini.
1.3 Sicurezza elettrica
Il prodotto deve essere
scollegato durante le procedure
di installazione, manutenzione,
pulizia, riparazione e spostamento.
Se il cavo di alimentazione
è danneggiato, deve essere
sostituito da una persona
qualificata e specificata dal
produttore, dal servizio assistenza
autorizzato o da un importatore, al
fine di evitare potenziali pericoli.
Non schiacciare il cavo di
alimentazione sotto o dietro il
prodotto. Non appoggiare oggetti
pesanti sul cavo di alimentazione.
Il cavo di alimentazione non deve
essere piegato eccessivamente,
non deve essere schiacciato e non
deve venire a contatto con una
qualsiasi fonte di calore.
Non utilizzare prolunghe, multiple
o adattatori per far funzionare il
prodotto.
Le multiple o le fonti di
alimentazione portatili possono
surriscaldarsi e causare incendi.
Pertanto, non tenere le multiple
dietro o vicino al prodotto.
La spina deve essere facilmente
accessibile. Nel caso non sia
possibile, l'impianto elettrico a
cui è collegato il prodotto deve
contenere un dispositivo (come
un fusibile, un interruttore, un
salvavita, ecc.) che sia conforme
alle norme elettriche e che
scolleghi tutti i poli dalla rete.
Non toccare la spina di
alimentazione con le mani
bagnate.
Togliere la spina dalla presa,
afferrando la spina e non il cavo.
1.4 Sicurezza nel
trasporto
Il prodotto è pesante, non
spostarlo da soli.
Non tenerne lo sportello, quando
si sposta il prodotto.
Fare attenzione a non danneggiare
il sistema di raffreddamento o le
tubazioni durante il trasporto. Se
le tubazioni sono danneggiate,
non accendere il prodotto e
contattare il servizio di assistenza
autorizzato.
1.5 Sicurezza
nell’installazione
Contattare il servizio di assistenza
autorizzato per l'installazione del
prodotto. Per rendere il prodotto
pronto per l'utilizzo, consultare
le informazioni contenute nel
manuale d'uso, per assicurarsi
che gli impianti elettrici e idrici
siano adatti. In caso contrario,
chiamare un elettricista e un
idraulico qualificati, per ottenere le
necessarie disposizioni. Se non ci
si rivolge a un aiuto professionale,
vi è il rischio di scosse elettriche,
incendi, problemi con il prodotto o
lesioni!
Prima dell'installazione,
controllare se il prodotto
presenta difetti. Se il prodotto è
13
IT
RO
Leggere anzitutto la sezione “Istruzioni di sicurezza”!
5. Preparazione
Il frigorifero dovrà essere
installato ad almeno 30 cm
lontano da fonti di calore, come
forni, riscaldamento centrale e
stufe e ad almeno 5 cm da forni
elettrici e non deve essere esposto
alla luce diretta del sole.
La temperatura ambiente della
stanza in cui viene installato il
frigorifero deve essere almeno
-5°C . Usare il frigorifero in
ambienti con temperatura
inferiore non è consigliabile per
motivi di efficienza.
Assicurarsi che linterno del
frigorifero sia ben pulito.
In caso di installazione di due
frigoriferi luno accanto all’altro,
devono esservi almeno 2 cm di
distanza tra di loro.
Quando il frigorifero viene messo
in funzione per la prima volta,
osservare le seguenti istruzioni
per le prime sei ore.
La porta non si deve aprire
frequentemente.
Deve funzionare vuoto senza
alimenti allinterno.
Non staccare il frigo dalla presa
di corrente. Se si verifica un calo
di potenza al di là del controllo
dell'utente, vedere le avvertenze
nella sezione “Soluzioni
consigliate per i problemi”.
Conservare i materiali originali di
imballaggio per futuri trasporti o
spostamenti.
In alcuni modelli, il pannello si
spegne automaticamente 5 minuti
dopo che la porta è stata chiusa. si
riattiva automaticamente quando
la porta viene aperta o premendo
qualsiasi pulsante.
A causa del cambiamento di
temperatura dovuto all’apertura/
alla chiusura dello sportello
dell’apparecchio durante il
funzionamento, la formazione di
condensa su sportello/ripiani e sui
contenitori di vetro è normale.
Poiché l’aria calda e umida
non penetra direttamente nel
prodotto quando le porte non sono
aperte, il prodotto si ottimizza in
condizioni sufficienti a proteggere
il cibo. In risparmio energetico,
le funzioni e i componenti quali
compressore, ventola, caloriferi,
sbrinamento, illuminazione,
display e via dicendo funzionano
secondo necessità per consumare
il minimo di energia pur
mantenendo gli alimenti freschi.


Produkt Specifikationer

Mærke: Grundig
Kategori: Køleskab
Model: GKNI56930FN

Har du brug for hjælp?

Hvis du har brug for hjælp til Grundig GKNI56930FN stil et spørgsmål nedenfor, og andre brugere vil svare dig




Køleskab Grundig Manualer

Køleskab Manualer

Nyeste Køleskab Manualer