GVM GT-80WD Manual


Læs nedenfor 📖 manual på dansk for GVM GT-80WD (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
MOTORIZED SLIDER
1 2
1 2
1 2
3
1 2
GT-80WD
4 5
1 2
wireless
controller 1*
battery 2 battery *
charger 1*
wireless controller
charger 1*
shutter cable*1
motorized
camera head 1*
Carry bag*1Extension shutter
cable*1
1
1
1
11 Packing list
2
2
2
22 Mounting the slider and camera
1. Please charge the wireless controller and battery before
using this product.
sketc h of charge the wireless control lersketc h of charge the battery
2. Please install and use this product as shown in the picture.
1 Mounting the motorized camera head on the slider.
(As shown below)
2 Mounting the camera on the slider. (As shown below)
4 Install the battery on the slider and check the signal
cable or shutter cable connecting correctly or not.
(As shown below)
3 Connect the extension shutter cable.(As shown below)
3
3
3
33 Slider motion
1. Turn on the slider and wireless controller. (The slider s
LED indicator light open and blinking, the controllers
screen open as shown below)
3. Manual operation mode: Video Shot-Manual Mode
(Press the button of the controller and the orbit will act
accordingly)-choose the speed menu can adjust the
current speed.
2. Bluetooth wireless connection: press Setting-
Bluetooth Setting-Searching Device-choose the device
code which start with letter D-pressOKbutton to confirm
the device(The upper right of the screen will show if
the connecting is successful) - -› ›
Video Shot
Time Lapse
Panotama Shot
Setting
Langu age English :
Reset N o :
Version 1 0 0 : . .
Bluetooth Setting
Searching Device
Langu age English :
Reset N o :
Version 1 0 0 : . .
Bluetooth Setting
1: D8B04CEA C83F
- -› ›
Video Shot
Time Lapse
Panotama Shot
Setting
Manual Mode
Auto Mode
Speed 100 : %
Axis X 0 :
Axis Y 0 :
Axis Z 0 :
- - - - - -› › › › › ›
Speed 100 : %
Axis X 0 :
Axis Y 0 :
Axis Z 0 :
Speed 100 : %
Axis X 10 58 :
Axis Y 0 :
Axis Z 0 :
- - - -› › › ›
4. Auto operation mode:
① : Setting the append point
A : “Video Shot-Auto Mode-Set key-Append Point A
(Move the camera to the start point you need)-Save:Yes
(As shown below)
Video Shot
Time Lapse
Panotama Shot
Setting
Manual Mode
Auto Mode
Set Key
Auto Lo op
Auto Stop
- - - - - -› › › › › ›
Append Point A
(Start point)
B : “Video Shot-Auto Mode-Set key-Append Point B
(Move the camera to the end point you need)-Save:Yes
(As shown below)
Append Point B
(End poin)
Append Point : A
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
- - - - - -› › › › › ›
Append Point : B
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
- - - - - -› › › › › ›
5. Time Lapse: Time Lapse Setting” - setting the “Times,
“ Photos,Stop Time,Delay Time,Set start” and “set End
-Execution(As shown below)
Diagonal A Diagonal B
Video Shot
Time Lapse
Panotama Shot
Setting
Set Key
Time Lapse Setting
Time s : 00:00:01.0
Photo s : 1
Stop Time : 1.0
Delay Time : 0.2
Set start : A
Set End : B
TimeLapse Status : Running
Completion : 0
Remaining : 0
Run Time : 00:00:01
Battery : 0.000
- -› ›
Loop : Yes
Execution
- -› ›
- - - - - -› › › › › ›
Video Shot
Time Lapse
Panotama Shot
Setting
Diagonal A
Diagonal B
AxisX Photos : 4
AxisY Pho tos : 1
Stop Time : 1.0
Delay Time : 0.2
Execution
- - - - - -› › › › › ›
6. Panotama Shot: Setting the “Diagonal A and “Diagonal B”
- Setting the “Axis X photos(As shown below), then press
“Execution
Auto Loop mode:
Video Shot-Auto Mode-Auto Loop-adjust the “Speed-
setting the start point-setting the end point-setting the
Loop Count-Execution”(As shown below)
Set Key
Auto Lo op
Auto Stop
Speed : 100%
Set Sta rt : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Sta rt : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Sta rt : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Sta rt : A
Set End : B
Loop Count : 6
Execution
Speed : 100%
Set Sta rt : A
Set End : B
Loop Count : 6
Execution
- - - - - -› › › › › ›
- - - - - -› › › › › ›


Produkt Specifikationer

Mærke: GVM
Kategori: Ikke kategoriseret
Model: GT-80WD

Har du brug for hjælp?

Hvis du har brug for hjælp til GVM GT-80WD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret GVM Manualer

GVM

GVM GT-J80D Manual

15 November 2024
GVM

GVM GP-80QD Manual

7 Oktober 2024
GVM

GVM RGB-T20R Manual

4 Oktober 2024
GVM

GVM TQ-L Manual

3 September 2024
GVM

GVM Y60D256 Manual

6 August 2024
GVM

GVM 50SM Manual

5 August 2024
GVM

GVM 1200D Manual

5 August 2024
GVM

GVM SD600S Manual

4 August 2024
GVM

GVM GT-60D Manual

1 August 2024
GVM

GVM GT-80-40Y Manual

25 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024