Hager HIC494E Manual


Læs nedenfor 📖 manual på dansk for Hager HIC494E (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
1 6LE001162A.e
6LE001162A.e
HIC4xxE
Preliminary operations
Check the following upon delivery and after removal
of the packaging:
Packaging and contents are in good condition.
• The product reference corresponds to the order.
Contents should include:
- 1 x motorised changeover switch
- 1 x emergency handle and fi xing clip
- 1 x quickstart instruction sheet.
Accessories
Bridging bars and connection kits.
Terminal shrouds.
Terminal shield.
Voltage sensing kit.
HZI911 interface.
Current transformers.
Plug-in optional modules: RS485 MODBUS
communication, 2 inputs/2 outputs, Ethernet
communication, Ethernet communication +
RS485 JBUS/MODBUS gateway, Analogue
outputs, Pulse outputs.
This quick start is intended for personnel trained in
the installation and commissioning of this product.
For further details refer to the product instruction
manual available on the hager website.
This product must always be installed and
commissioned by qualifi ed and approved
personnel.
Maintenance and servicing operations should be
performed by trained and authorised personnel.
Do not handle any control or power cables
connected to the product when voltage may be,
or may become present on the product, directly
through the mains or indirectly through external
circuits.
Always use an appropriate voltage detection
device to confi rm the absence of voltage.
Ensure that no metal objects are allowed to fall
in the cabinet (risk of electrical arcing).
Failure to observe good enginering practises as
well as to follow these safety instructions may
expose the user and others to serious injury or
death.
Installation and commissioning
Risk of electrocution, burns or injury to
persons and/or damage to equipment.
Risk of damaging the device.
In case the product is dropped or
damaged in any way it is recommended
to replace the complete product
.
Step 1
Cabinet/
Back Plate
Installation
Step 2
Connecting the
power section
Step 3
COMMAND/
CONTROL
terminal
connections
Step 4
Power SUPPLY
and controller
terminal
connections
Step 5
Check
Step 6
Programming
Step 7A
AUT Mode
(Automatic
Control)
Step 7B
AUT Mode
(Remote
Control)
Step 7C
Emergency
Manual
Operation
Step 7D
Padlocking
zMotorised source changeover switch
800A - 3200A
Clip for
storage
of the
emergency
handle


Produkt Specifikationer

Mærke: Hager
Kategori: Ikke kategoriseret
Model: HIC494E

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager HIC494E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Hager Manualer

Hager

Hager LLD100 Manual

12 Januar 2025
Hager

Hager GS11019016 Manual

30 December 2025
Hager

Hager EG203 Manual

30 December 2025
Hager

Hager MZN131 Manual

30 December 2025
Hager

Hager FN097E Manual

30 December 2025
Hager

Hager FN117E Manual

30 December 2025
Hager

Hager FN296E Manual

30 December 2025
Hager

Hager FN247E Manual

9 December 2024
Hager

Hager FN217E Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sonifex

Sonifex PS-AMP Manual

14 Januar 2025
Powerfix

Powerfix IAN 45827 Manual

13 Januar 2025
Faber

Faber Pisa 60 X Manual

13 Januar 2025
Hasbro

Hasbro A8752 Manual

13 Januar 2025
IFM

IFM EVC231 Manual

13 Januar 2025
Edimax

Edimax ES-5800G V2 Manual

13 Januar 2025
IFM

IFM PN2598 Manual

13 Januar 2025