Hager JKD186MID Manual


Læs nedenfor 📖 manual på dansk for Hager JKD186MID (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
HGR42EW
Energy Meters
1
Hager Ltd. Hortonwood 50 Hortonwood, Telford, TF1 7FT / 01952 675 675
by Rayleigh Instruments
E&OE. Please check critical parameters at time of order. ISSUE : 2019091
Product Description
The HGR42EW series is part of the easywire® family of
meters, designed to save up to 90% installation time compared
to a standard meter and current transformer installation.
The meters contain two 3 Phase metering circuits in one case,
and accept inputs from two separate easywire® 3 Phase
current transformers while still utilizing the same voltage
reference.
This MID approved, 4 module DIN rail mounted multifunction
energy meter, is suitable for monitoring energy consumption
and other electrical parameters in industrial and commercial
applications. This series is particularly suited for use in split-
load lighting and power boards, in three phase applications,
and have been certied for billing purposes.
A high eciency white backlit LCD display provides a clear
indication of measured values in all light conditions. Front
push-buttons allow user access to the display page required.
The meter is available in two versions:-
With two pulse outputs and RS485 Modbus communication.
With two pulse outputs and Mbus communication
Four module DIN rail mounted
Energy pulse LED / High denition white backlit LCD display
2 x Inputs from easywire® Current Transformers
Three phase network compatible
Independently programmable CT ratios (Load 1 and Load 2)
Programmable voltage transformer ratio
True RMS measurement
MID B+D Certied
Simple programming & operation / auto or manual page scrolling
2 x Pulse outputs and Modbus communication or Mbus
Voltage OUT connector for daisy-chaining up to 32 meters from
one supply
HGR42EW Series
Split Load Three Phase easywire®
Multifunction DIN Rail
Energy Meter (MID Certied)
Displayed Parameters
Voltage - L-L, L-N and average
Current - Per phase and average (LOAD 1 and LOAD 2)
Power Factor - per phase and average
Frequency
Power - Active, Reactive and Apparent (per phase and total)
Power Max. demand - Active and apparent power.
Energy - Active, reactive and apparent (per load and total)
Measuring Instruments Directive
MID MID A FORPPROVED
BILLING A ICATIONSPPL
MID
Communications Part Number
Split Load Input with RS485 Modbus Output and
Two Pulse Outputs kWh (1 per circuit)
HGR42EWC
Split Load Input with Mbus Output and Two Pulse
Outputs kWh (1 per circuit)
HGR42EWMB


Produkt Specifikationer

Mærke: Hager
Kategori: Ikke kategoriseret
Model: JKD186MID

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager JKD186MID stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Hager Manualer

Hager

Hager FN247E Manual

9 December 2024
Hager

Hager FN217E Manual

9 December 2024
Hager

Hager FN092E Manual

9 December 2024
Hager

Hager FN093E Manual

9 December 2024
Hager

Hager FZ760E Manual

9 December 2024
Hager

Hager FN266E Manual

9 December 2024
Hager

Hager FN216E Manual

9 December 2024
Hager

Hager FN101E Manual

9 December 2024
Hager

Hager FN277E Manual

9 December 2024
Hager

Hager FN356E Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer