Hager MZ203 Manual

Hager Ikke kategoriseret MZ203

Læs nedenfor 📖 manual på dansk for Hager MZ203 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

4.43

Sales Service Centre • 01952 675612 Technical Support Helpline • 01952 675689

Circuit Breaker Auxiliaries

Functions

Tripping and indication auxiliary contacts are common to the range of

multi-pole 10kA MCBs, and RCCBs. They should be mounted on the

left hand side of the device.

Auxiliary Contact MZ201 (Fig 9)

Allows remote indication of the status of the device contacts to which

it is associated.

Auxiliary Contact and Alarm Contact MZ202

This accessory has two separate functions. Like the MZ201 auxil-

iary contact, however the alarm contact will provide indication if the

breaker trips under fault conditions.

Wiring Diagram

MZ201 Auxiliary Contact and Alarm Contract

MZ203 Shunt Trip*

Allows tripping of the device by feeding the coil. The contacts also

allow for remote indication of operation.

MZ206 Under Voltage Release* (Fig 10)

Allows the MCB to trip when the voltage drops or by pressing a

remote off switch (i.e. emergency stop).

* Indication that the product has tripped due to the voltage release is

provided by a ag on the product. 

MZ206 Under Voltage Release

Electrical Characteristics

MZ201/MZ206 MZ203 MZ206

1 x O 1 x C

Contact

230V ~ 6A

AC-1

230 - 415~

110 - 130...

230V~

50Hz

Grouping / Combination of Several Auxiliaries

On 2, 3 and 4 pole MCBs it is possible to associate 3 auxiliaries –

2 indication auxiliaries and 1 release auxiliary. In this case, it is important to rst x the indication auxiliary (MZ201 and MZ202) and then the  

release auxiliary (MZ203 and MZ206).

Electrical connection

By terminal tted with xed clamp screws wiring capacity. 

Flexible : 2 x 1.5mm2

Rigid : 2 x 1.5mm2

MZ203

Power - 8VA

tolerance : -15% of Un

MZ206

Latching voltage is between 35 and 70% of U

n 230V~

Coil consumption 3VA

Flag indicating that the

product has tripped due to

the voltage release

MZ203 to MZ206

Fig. 12

MZ203 to

MZ206

Fig. 11

MZ201 to

MZ201

+ + + +MZ201 to

MZ201

MZ202 to

MZ201

MCB

MZ206

MZ202

Fig. 10

Fig. 9

MZ 201

Protection

Devices

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	MZ203
Bredde:	18 mm
Dybde:	68 mm
Højde:	83 mm
Driftstemperatur (T-T):	-25 - 60 °C
Indgangsfrekvens:	50/60 Hz
Nominel spænding:	415 V
Moduler, antal (maks.):	1 modul(er)
Totalt strømtab:	25.3 W