Hifonics SWVL-1B Manual


Læs nedenfor 📖 manual på dansk for Hifonics SWVL-1B (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Step 1 Detach the Speaker from the pod housing
by loosening the 4 screws.
NOTE – Be mindful of the speaker wiring. Remove
Cautiously.
Step 2 Remove the clamp base by loosening the
nuts and screws.
Step 3 Attach the swivel mount to pod
housing using the supplied longer
screws and existing nuts.
NOTE – Rotating the top of the
swivel mount 90 degrees will
give you access the mounting
hole. Make sure the adjustment
locking screw is pointed toward
the rear of the pod.
Step 4 Attach the clamp base to
the swivel mount using the provided
shorter screws.
Step 5 Reattach the speaker to
pod housing using the 4 screws.
Step 6 Install the pod speaker in
the desired location.
NOTE – Refer to the pod speaker
manual for the proper installation
process.
Step 7 Fine-tune the desired mounting angle. Secure the placement
by tightening the adjustment locking screw located on the base of the
swivel mount.
Adjustment Locking Screw
Swivel Mount Bracket Installation
HF SWVL QSG 01 - rev1


Produkt Specifikationer

Mærke: Hifonics
Kategori: Ikke kategoriseret
Model: SWVL-1B

Har du brug for hjælp?

Hvis du har brug for hjælp til Hifonics SWVL-1B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Hifonics Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024