Hikvision DS-2AE4225T-D Manual

Hikvision Overvågningskamera DS-2AE4225T-D

Læs nedenfor 📖 manual på dansk for Hikvision DS-2AE4225T-D (48 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/48

HD-TVI Speed Dome

User Manual

UD03862B

HD-TVI Speed Dome User Manual

User Manual

This user manual is intended for users of -TVI Speed Dome. It includ instrucons on how to use HD es

the Product. The soware bodied in the Product is governed by the user license agreement em

covering that Product.

About this Manual

This Manual is subject to domesc and internaonal copyright protecon. Hangzhou Hikvision

Digital reserves all rights to this manual. This manual cannot be Technology Co., Ltd. (“Hikvision”)

reproduced, changed, translated, or distributed, parally or wholly, by any means, without the

prior wrien permission of Hikvision.

Trademarks

and other Hikvision marks are the property of Hikvision and ar registered e

trademarks or the subject of applicaons for the same by Hikvision and/or its aliates Other .

trademarks menoned in this manual are the properties of their respecve owners No right of .

license is given to use such trademarks without express permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.

HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE

USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION

CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE

WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY .

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS

DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDIN AMONG OTHERS, DAMAGES G,

FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA

OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON TH MANUAL, EVEN IF IS

HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES .

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN

DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO

YOU.

Support

Should you have any quesons, please do not hesitate to contact your local dealer.

Thank you for purchasing our product. If there are any quesons, or requests, please do not

hesitate to contact the dealer.

HD-TVI Speed Dome User Manual

Cauons:

 Make sure the power supply voltage is correct before using the product.

 Do not drop the product or subject it to physical shock. Do not install the product vibratory on

surface or places.

 Do not expose it to high electromagnec radiang environment.

 Do not aim lens at the strong light such as sun or incandescent lamp. The strong light can the

cause fatal damage to the product.

 The sensor may be burned out by a laser beam, so when any laser equipment is being used,

make sure that the surface of the sensor not be exposed to the laser beam.

 Do not place the dome in extremely hot, cold, dusty or damp locaons, otherwise re or

electrical shock will occur. Refer to the Specication for the details of operang temperature.

 To avoid heat accumulaon, good venlaon is required for a proper operang environment.

 While shipping, the product should be packed in its original packing.

 Use the provided glove when open up the product cover. Do not touch the product cover with

ngers directly, because the acidic sweat of the ngers may erode the surface coang of the

product cover.

 Use a so and dry cloth when clean inside and outside surfaces of the product cover. Do not use

alkaline detergents.

 Improper use or replacement of the battery may result in hazard of explosion. Please use the

manufacturer recommended battery type.

HD-TVI Speed Dome User Manual

Table of Contents

Chapter 1 Overview .................................................................................................................. 1

1.1 Descripon ............................................................................................................................... 1

1.2 Funcons .................................................................................................................................. 1

Chapter 2 Geng Started ......................................................................................................... 4

2.1 Power-up Acon ....................................................................................................................... 4

2.2 Basic Operaons 5 ......................................................................................................................

2.3 System-dened Presets ............................................................................................................ 5

2.4 -screen Displays On ................................................................................................................... 6

Chapter 3 Menu Operaon ....................................................................................................... 7

3.1 Accessing and Operang the Menu ......................................................................................... 8

3.2 Conguring System Informaon .............................................................................................. 8

3.2.1 Checking System Informaon ............................................................................................... 8

3.2.2 Conguring System Parameters 9 ...........................................................................................

3.3 Conguring Image Parameters ...............................................................................................13

3.3.1 Conguring Camera Parameters .........................................................................................13

3.3.2 Conguring Privacy Mask ................................................................................................... 19

3.3.3 Conguring Output Standard ............................................................................................. 20

3.3.4 Conguring IR Parameters .................................................................................................. 21

3.4 Conguring PTZ Control Parameters ...................................................................................... 22

3.4.1 Conguring PTZ Parameters ............................................................................................... 22

3.4.2 Conguring Presets ............................................................................................................. 24

3.4.3 Conguring Patrols ............................................................................................................. 25

3.4.4 Conguring Paerns ........................................................................................................... 26

3.4.5 Conguring Timing Tasks .................................................................................................... 28

3.4.6 Conguring Zone ................................................................................................................ 30

3.5 Conguring and Handling Alarms .......................................................................................... 32

3.5.1 Conguring Alarm Input and Linkage Acons .................................................................... 32

3.5.2 Conguring Alarm Parameters ........................................................................................... 33

3.5.3 Conguring Alarm Output .................................................................................................. 34

3.6 Others ..................................................................................................................................... 35

3.6.1 Restoring Default Dome Sengs ........................................................................................ 35

3.6.2 Restoring Default Camera Sengs ..................................................................................... 35

3.6.3 Reboong the Dome ..........................................................................................................35

Appendix .................................................................................................................................................................. 35

Appendix 1 Lightning & Surge Protecon ........................................................................................36

Appendix 2 RS485 Bus Connecon ..................................................................................................37

Appendix 3 24VAC Wire Gauge & Transmission Distance ................................................................ 40

Appendix 4 Wire Gauge Standards ..................................................................................................41

HD-TVI Speed Dome User Manual

Chapter 1 Overview

1.1 Descripon

Integrated with the built-in pan/lt unit, the - speed dome features highly sensive response HD TVI

and reliable performance The speed dome can be adopted in various surveillance elds with its .

full-integral funcons and features, such as corridor, large venue, meeng room, station,

neighborhoods, etc.

1.2 Funcons

The funcons vary according to the dierent models of the speed dome.

 Coaxial Control

The speed dome with a specified DVR or controller can be sent the control signals via coaxial cable

(BNC cable).

 High-Denion Output

The resoluon of the output image can be up to 1080P.

 Limits

The dome can be programmed to move within the limits(le/right, up/down).

 Self-adapve Protocol

While using RS485 control, the speed dome is compable with PELCO-D, PELCO-P and PRIVATE-Code,

etc., and is capable of being self-adapve to these protocols without selecting protocol by DIP

switch sengs. While using coaxial control, the speed dome is self-adapve to PELCO-D and

PRIVATE-Code protocols.

 Keyboard Control

The pan/lt movement and zoom acons of dome can be controlled by the control keyboard, DVR,

matrix, etc.

 Scan Modes

The dome provides 5 scan modes: auto scan, lt scan, and panorama scan.

 Preset Freezing

This feature freezes the scene on the monitor when the dome is moving to a preset. This allows for

smooth transion from one preset scene to another. It also guarantees that masked area will not be

revealed when the dome is moving to a preset.

 Presets

A preset is a predened image posion. When the preset is called, the dome will automacally

move to the dened posion. The presets can be added, modied, deleted and called.

 Label Display

The on-screen label of the preset tle, PT display, zoom, and me can be displayed on the monitor.

 Auto Flips

HD-TVI Speed Dome User Manual

In manual tracking mode, when a target object goes directly beneath the dome, the video will

automacally ips 180 degrees in horizontal direcon to maintain connuity of tracking. This

funcon can also be realized by auto mirror image depending on different camera models.

 Privacy Mask

This funcon allows you to block or mask certain area of a scene, for prevenng the personal

privacy from recording or live viewing. A masked area will move with pan and lt funcons and

automacally adjust in size as the lens zooms telephoto and wide.

 3D Posioning

In the client soware, use the le key of mouse to click on the desired posion in the video image

and drag a rectangle area in the lower right direcon, then the dome system will move the posion

to the center and allow the rectangle area to zoom in. Use the le key of mouse to drag a rectangle

area in the upper le direcon to move the posion to the center and allow the rectangle area to

zoom out.

 Proporonal Pan/Tilt

Proporonal pan/lt automacally reduces or increases the pan and lt speeds according to the

amount of zoom. At telephoto zoom sengs, the pan and lt speeds will be slower than at wide

zoom sengs. This keeps the image from moving too fast on the live view image when there is a

large amount of zoom.

 Auto Focus

The auto focus enables the camera to focus automacally to maintain clear video images.

 Day/Night Auto Switch

The speed domes deliver color images during the day. And as light diminishes at night, the speed

domes switch to night mode and deliver black and white images with high quality.

 Slow Shuer

In slow shutter mode, the shuer speed will automacally slow in low illuminaon condions down

to maintain clear video images by extending the exposure me. The feature can be enabled or

disabled.

 Backlight Compensaon (BLC)

If you focus on an object against strong backlight, the object will be too dark to be seen clearly. The

BLC (Backlight Compensaon) funcon can compensate light to the object in the front to make it

clear, but this causes the over-exposure of the background where the light is strong.

 Wide Dynamic Range (WDR)

The wide dynamic range (WDR) funcon helps the camera provide clear images even under back

light circumstances. When there are both very bright and very dark areas simultaneously in the eld

of view, WDR balances the brightness level of the whole image and provide clear images with

details.

 White Balance (WB)

White balance can remove the unrealisc color casts. White balance is the white rendion function

of the camera to adjust the color temperature according to the environment automacally.

 Patrol

A patrol is a memorized series of pre-dened preset funcon. The scanning speed between two

presets and the dwell me at the preset programmable. are

 Paern

A paern is a memorized series of pan, lt, zoom, and preset funcons By default the focus and iris .

HD-TVI Speed Dome User Manual

are in auto status during the paern is being memorized.

 Power O Memory

The dome supports the power o memory capability with the predened resume me. It allows the

dome to resume its previous posion aer power is restored.

 Time Task

A me task is a preconfigured acon that can be performed automacally at a specic date and

me. The programmable acons include: pan scan, patrol 1-8, pattern 1- preset 1-8, panorama 4,

scan, lt scan, day, night, and none.

 Park Acon

This feature allows the dome to start predened acon automacally aer a period of inacvity. a

HD-TVI Speed Dome User Manual

2.2 Basic Operaons

You can operate the speed dome by using a control device, including the control keyboard DVR, ,

DVS, etc. In this manual, accessing the speed dome via the web browser will be taken as the

example.

Panning and lng:

Click the direcon buttons to control the pan and lt movement of the speed dome.

Zooming:

Click the ZOOM+ ZOOM- and buons to control the zooming.

Focusing:

Click the and FOCUS+ FOCUS- buons to adjust the focus.

Iris:

Click the and buons to adjust the iris. IRIS+ IRIS-

2.3 System-dened Presets

Purpose:

The secon lists the system-dened presets with special funcons. These presets cannot be edited

but can be only called through a control device, e.g. a DVS or web browser. To call the

system-dened presets remotely, you can choose the preset number from the list in the PTZ control

panel. Please refer to table below for details.

For instance, preset 99 is the auto “Start scan”. If you call the preset 99, the speed dome starts auto

scan funcon.

Table 2-2 stem-dened Presets Sy

Preset NO.

Funcon

Preset NO.

Funcon

Auto-ip

Enable limits

Return to home posion

Set manual limits

Patrol 1

Remote reboot

Patrol 2

Access main menu

Patrol 3

Stop scanning

Patrol 4

Start Random Scanning

IR cut lter in

Start Frame Scanning

IR cut lter out

Start auto scanning

Paern 1

100

Start lt scanning

Paern 2

101

Start panorama scanning

Paern 3

102

Patrol 5

Paern 4

103

Patrol 6

Enable fast patrol

104

Patrol 7

Enable Wiper

105

Patrol 8

HD-TVI Speed Dome User Manual

2.4 On-screen Displays

The speed dome supports following -screen displays: on

Zoom Rao: Idenes the amount of magnicaon. The format is ZXXX. XXX is the zoom amount.

PT Angle: Displays panning and lng direcon, with the format of NEXXX/TXXX. The followed NE

with indicates the degrees in north east direcon, while the T followed with XXX indicates the XXX

degrees in lt posion.

Alarm: When an alarm is triggered, the corresponding informaon will be displayed.

Time: Displayed as Day/Month/Year/Day of Week/Hour/Minute. It supports 24-hour me system.

Preset Label: Aer you call the congured preset, the preset number is displayed if the lens moves

to the certain place where you ve set a preset for. ’

Zone: Display the zone tle.

Address: Display the address of the speed dome.

Error Rate: Display the error rate of the speed dome.

Fan and Heat: Display the heat informaon of the speed dome.

HD-TVI Speed Dome User Manual

Chapter 3 Menu Operaon

 T operaon interface of the dierent speed domes may differ. Please refer to the actual he

operaon interface.

 You can click the le and right direcon buons in the PTZ control panel via the web browser of

the DV to enter the next page return to the previous page of the submenu if more than one R or

page is available.

MAIN MENUS

DOME

SETTINGS

SYSTEM INFO

ADDRESS

COM FORMAT

PROTOCOL

FIRMWARE

HARDWARE

BUILD DATE

TEMPERATURE

SYSTEM

SETTINGS

CAMERA

PARAMETER

MOTION

PARAMETER

PRESETS

PATROLS

TIME TASKS

PATTERNS

PRIVACYS

ALARMS

AUXS

CLEAR

SETTINGS

RESTORE

DEFAULTS

RESTORE

CAMERA

REBOOT

DOME

LANGUAGE

CAM VERSION

PARAM DATE

ZONES

PARAMETER

VIDEO SET

SMART

SETTINGS

Figure 3-1 Menu Structure

Before you start :

You can operate the speed dome by using the on-screen display menu remotely by connecng to a

DVR or a DVS (encoder).

Examples of entering speed dome menu are listed as follows:

 Enter the menu by pressing buons: - - - on the front panel of the DVR. PTZ > REC > 9> 5

 Enter the menu by pressing buons: - - - on the keyboard. CALL > 9> 5> ENTER

 Enter the menu via the web browser of a DVR/DVS.

Menu operaons via th web browser of a DVR will be taken as an example in this chapter. e

HD-TVI Speed Dome User Manual

3.1 Accessing and Operang the Menu

To enter the main menu:

Steps:

1. Connect the video and RS-485 cables of speed dome to a DVR.

2. Visit the DV via the web browser. R

3. View the live video of the eed dome. sp

4. or F PELCO-P/D and other private PTZ protocols, call preset from the preset list in the PTZ 95

control panel of the DVR.

MAIN MENUS

<LANGUAGE> ENGLISH

EXIT

Figure 3-2 Main Menu

To move the cursor and operate the menu:

 Move the cursor up/down: On the live view page of the web browser, click up/down direcon

buons or FOCUS + FOCUS - and buons in the PTZ control panel to move the cursor up and

down.

 Enter/Exit: On the live view page of the web browser, click to enter a submenu; move the IRIS+

cursor to and click to exit. Exit IRIS+

To change the value of a parameter:

Steps:

1. Move the cursor to the target item and click buon. You can see the shape of cursor IRIS+

changes.

2. Click the up/down or left/right buons in the PTZ control panel to choose the value from the

selectable value list.

3. Press IRIS+ IRIS- to conrm the change or click to cancel and restore the original value. You can

see the shape of cursor changes again.

3.2 Conguring System Informaon

3.2.1 Checking System Informaon

Purpose:

System informaon menu displays the current system informaon of the speed dome, including

HD-TVI Speed Dome User Manual

 Dome address setngs

To Set the So Address of the Speed Dome

If the is set as , the so address is the valid address for connecng the SET SOFT ADDR ACT ON

speed dome. The selectable so address ranges from 1 to 255;

If the is set as , the hard address set by the DIP switch is the valid address SET SOFT ADDR ACT OFF

of the speed dome.

 Before you set the so address of the speed dome, you need to conrm that it is within the

control range of the control device (e.g. the DVR).

 Aer you enable/disable the so address, the speed dome will reboot automacally to acvate

the setngs.

To Set the Broadcast Address of the Speed Dome

When the BROADCAST ADDR is set as ON, the control device with address 0 is capable of

controlling all domes connected to it.

 So Baud Rate Seings

If the SOFT BAUD is set as ON, the so baud rate is the valid baud rate for the speed dome, with

2400, 4800, 9600 and 19200 selectable.

If the is set as , the baud rate should be set by the DIP switch. SOFT BAUD OFF

Aer you enable/disable the so baud rate, the speed dome will reboot automacally to

acvate the setngs.

 PELCO CHECKSUM

The PELCO CHECKSUM is used for Pelco-P and Pelco-D protocols. If the video turns to slack or

uncontrollable, you can set the PELCO CHECKSUM as ON to improve the video quality.

 System Time Conguraon

(1) Move the cursor to SYS TIME using the direcon buttons and click to enter. IRIS+

(2) Click the le/right direcon buons to posion the cursor on the specic item

(year/month/day or hour/minute/second) of which you want to change the value.

(3) Click the up/down direcon buons to increase/decrease the value.

(4) Click buon to confirm the sengs and exit. IRIS+

HD-TVI Speed Dome User Manual

Y - M - D 16 12 12

H - M - S 15 33 25

DONE: OPEN

QUIR: CLOSE

Figure 3-5 Set the System Time

 Zero Angle Conguraon

Purpose:

You can dene the zero angle of the speed dome on the submenu. ZERO ANGLE

Steps:

1. Move the cursor to using the direcon buons and click to enter. ZERO ANGLE IRIS+

2. Click the le/right/up/down direcon buons to adjust the monitor angle of the speed dome.

3. Click buon to conrm the sengs and exit. IRIS+

 Display Sengs

Purpose:

You can enable or disable the on-screen display of PTZ movements, alarms, me, preset, zone,

address, error rate, and fan/heat show, etc.

Steps:

1. Move the cursor to DISPLAY SETTINGS using the direcon buttons and click to enter. IRIS+

2. Move the cursor to the target item and click and click up/down direcon buttons to IRIS+

choose each display mode as ON OFFor , and dene each display me as 2 seconds, 5 seconds

or 10 seconds.

3. Click buon to conrm the sengs. IRIS+

If you enable the OSD for both and ZOOM SHOW P/T ANGLE, while calling a preset, the preset

No. will be displayed on the screen ll the preset scene passes.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2AE4225T-D
Kode for international beskyttelse (IP):	IP66
Type:	CCTV sikkerhedskamera
Vekselstrømsindgangsspænding:	24 V
Bredde:	185 mm
Dybde:	185 mm
Højde:	330 mm
Vægt:	2000 g
Produktfarve:	Black, White
Formfaktor:	Kuppel
Understøttede videotilstande:	1080p
Format til analogt signal:	NTSC, PAL
Driftstemperatur (T-T):	-30 - 65 °C
Maksimal opløsning:	1920 x 1080 pixel
Forbindelsesteknologi:	Ledningsført
Strømkilde type:	Vekselstrøm
Monteringstype:	Loft/væg
Diameter:	185 mm
Indbygget HDD:	Ingen
Understøttet placering:	Indendørs & udendørs
Hvidbalance:	ATW, Auto, Indoor, Manual, Outdoor
Sensortype:	CMOS
Samlet antal megapixels:	2 MP
Optisk zoom:	23 x
Digital zoom:	16 x
Autofokus:	Ja
Hældningsvinkelområde:	0 - 90 °
Progressiv scanning:	Ja
Bredt dynamikområde (WDR):	Ja
Dag/nat funktion:	Ja
Infrarød (IR) cut-off filter:	Ja
Minimumsbelysning:	0.01 Lux
Panoreringsområde:	0 - 360 °
Optisk sensorstørrelse:	1/2.8 "
Maksimale blænderåbning tal:	3.7
Fortrolighedspolitik maskering:	Ja
Antal kameraer:	1
Brændviddeområde:	4 - 92 mm
Kameraets lukkerhastighed:	1/10000 - 1 sek./side
Mindste blænderåbnimg tal:	1.6
Hældningshastighed:	120 grader i sekundet
Panoreringshastighed:	160 grader i sekundet
BNC porte, udgående:	1
Kompensation for baggrundslys:	Ja
Objektivets synsvinkel, vandret:	49 °
Alarmindgang/-udgang:	Ja
Auto patrulje tilstand:	Ja
Forudindstillet hastighed:	160 grader i sekundet