Hikvision DS-2CD2546G2-I Manual

Hikvision Overvågningskamera DS-2CD2546G2-I

Læs nedenfor 📖 manual på dansk for Hikvision DS-2CD2546G2-I (114 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/114

Network Camera

User Manual

Iniaves on the Use of Video Products

Thank you for choosing Hikvision products.

Technology aects every aspect of our life. As a high-tech company, we are increasingly aware of

the role technology plays in improving business eciency and quality of life, but at the same me,

the harm of its improper usage. For example, video products are capable of recordingpotenal

real, complete and clear images. This provides a high value in retrospect and preserving real-me

facts. However, it may also result in the infringement of a third party's legimate rights and

interests if improper use and/or processing of video data takes place. With thedistribuon,

philosophy of "Technology for the Good", Hikvision requests that every end user of video

technology and video products shall comply with all the applicable laws and regulaons, as well as

ethical customs, aiming to jointly create a beer community.

Please read the following iniaves carefully:

●Everyone has a reasonable of privacy, and the expectaon installaon of video products should

not be in with this reasonable Therefore, a warning shall be given inconict expectaon. noce

a reasonable and eecve manner and clarify the monitoring range, when installing video

products in public areas. For non-public areas, a third party's rights and interests shall be

evaluated when installing video products, including but not limited to, installing video products

only aer obtaining the consent of the stakeholders, and not installing highly-invisible video

products.

●The purpose of video products is to record real acvies specic me within a and space and

under Therefore, every user shall specic condions. rst dene reasonably his/her own rights in

such scope, in order to avoid infringing on a third party's portraits, privacy or otherspecic

legimate rights.

●During the use of video products, video image data derived from real scenes will to beconnue

generated, including a large amount of biological data (such as facial images), and the data could

be further applied or reprocessed. Video products themselves could not disnguish good from

bad regarding how to use the data based solely on the images captured by the video products.

The result of data usage depends on the method and purpose of use of the data controllers.

Therefore, data controllers shall not only comply with all the applicable laws and regulaons and

other requirements, but also respect norms, social morality, goodnormave internaonal

morals, common and other non-mandatory requirements, and respect individualpracces

privacy, portrait and other rights and interests.

●The rights, values and other demands of various stakeholders should always be considered when

processing video data that is connuously generated by video products. In this regard, product

security and data security are extremely crucial. Therefore, every end user and data controller,

shall undertake all reasonable and necessary measures to ensure data security and avoid data

leakage, improper disclosure and improper use, including but not limited to, seng up access

Network Camera User Manual

Legal Informaon

About this Manual

The Manual includes for using and managing the Product. Pictures, charts, images andinstrucons

all other informaon hereinaer are for and only. The descripon explanaon informaon

contained in the Manual is subject to change, without due to noce, rmware updates or other

reasons. Please the latest version of this Manual at the Hikvision website ( nd hps://

www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properes of

Hikvision in various jurisdicons.

Other trademarks and logos are the menoned properes respecve of their owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

Network Camera User Manual

iii

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

Network Camera User Manual

Symbol Convenons

The symbols that may be found in this document are as follows.dened

Symbol Descripon

Danger

Indicates a hazardous which, if not avoided, will or couldsituaon

result in death or serious injury.

Cauon

Indicates a hazardous which, if not avoided, couldpotenally situaon

result in equipment damage, data loss, performance ordegradaon,

unexpected results.

Note Provides to emphasize or supplementaddional informaon

important points of the main text.

Network Camera User Manual

Safety Instrucon

These are intended to ensure that user can use the product correctly to avoid dangerinstrucons

or property loss.

Laws and Regulaons

●The device should be used in compliance with local laws, electrical safety and regulaons, re

prevenon regulaons.

Electricity

●In the use of the product, you must be in strict compliance with the electrical safety regulaons

of the and region.naon

●The equipment shall not be exposed to dripping or splashing and that no objects withlled

liquids, such as vases, shall be placed on the equipment.

●Provide a surge suppressor at the inlet opening of the equipment under special suchcondions

as the mountain top, iron tower, and forest.

●CAUTION: To reduce the risk of replace only with the same type and re, rang of fuse.

●The equipment must be connected to an earthed mains socket-outlet.

●An appropriate readily accessible disconnect device shall be incorporated external to the

equipment.

●An appropriate overcurrent protecve device shall be incorporated external to the equipment,

not exceeding the of the building.specicaon

●An all-pole mains switch shall be incorporated in the electrical installaon of the building.

●Ensure correct wiring of the terminals for to an AC mains supply.connecon

●The equipment has been designed, when required, modied connecon for to an IT power

distribuon system.

Baery

●Do not ingest baery. Chemical burn hazard!

●This product contains a cell coin/buon baery. coin/buon baery If the cell is swallowed, it

can cause severe internal burns in just 2 hours and can lead to death.

●Keep new and used baeries away from children.

●If the baery compartment does not close securely, stop using the product and keep it away

from children.

●If you think baeries might have been swallowed or placed inside any part of the body, seek

immediate medical aenon.

●CAUTION: Risk of explosion if the baery is replaced by an incorrect type. Dispose of used

baeries according to the instrucons.

●ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE

TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX

INSTRUCTIONS.

Network Camera User Manual

●Improper replacement of the with an incorrect type may defeat a safeguard (forbaery

example, in the case of some lithium types).baery

●Do not dispose of the into or a hot oven, or mechanically crush or cut the baery re baery,

which may result in an explosion.

●Do not leave the baery in an extremely high temperature surrounding environment, which may

result in an explosion or the leakage of ammable liquid or gas.

●Do not subject the baery to extremely low air pressure, which may result in an explosion or the

leakage of liquid or gas.ammable

●+ the terminal(s) of equipment which is used with, or generates direct current.idenes posive

- the idenes negave terminal(s) of equipment which is used with, or generates direct current.

Fire Prevenon

●No naked ame sources, such as lighted candles, should be placed on the equipment.

●The serial port of the equipment is used for debugging only.

Hot Surface Prevenon

●

CAUTION: Hot parts! Burned ngers when handling the parts. Wait one-half hour

aer o switching before handling parts. This scker is to indicate that the marked item can be

hot and should not be touched without taking care. For device with this scker, this device is

intended for installaon in a restricted access access can only be gained by servicelocaon,

persons or by users who have been instructed about the reasons for the restricons applied to

the and about any that shall be taken.locaon precauons

Installaon

●Install the equipment according to the in this manual.instrucons

●To prevent injury, this equipment must be securely aached oor/wall to the in accordance with

the installaon instrucons.

●Never place the equipment in an unstable locaon. The equipment may fall, causing serious

personal injury or death.

Power Supply

●The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and

the Limited Power Source. Refer to the appropriate documentaon for detailed informaon.

●The power source should meet limited power source or PS2 requirements according to IEC

60950-1 or IEC 62368-1 standard.

●DO NOT connect mulple devices to one power adapter, to avoid over-heang re or hazards

caused by overload.

●Make sure the plug is properly connected to the power socket.

Network Camera User Manual

vii

White Light Illuminator (If supported)

●Possibly hazardous opcal radiaon emied from this product.

●DO NOT stare at light source. May be harmful to the eyes.operang

●Wear appropriate eye protecon or DO NOT turn on the white light when you assemble, install

or maintain the camera.

Transportaon

●Keep the device in original or similar packaging while transporng it.

System Security

●The installer and user are responsible for password and security conguraon.

Maintenance

●If the product does not work properly, please contact your dealer or the nearest service center.

●We shall not assume any responsibility for problems caused by unauthorized repair or

maintenance.

●A few device components (e.g., capacitor) require regular replacement. The averageelectrolyc

lifespan varies, so periodic checking is recommended. Contact your dealer for details.

Cleaning

●Please use a so and dry cloth when clean inside and outside surfaces of the product cover. Do

not use alkaline detergents.

Using Environment

●When any laser equipment is in use, make sure that the device lens is not exposed to the laser

beam, or it may burn out.

●DO NOT expose the device to high electromagnec radiaon or dusty environments.

●For indoor-only device, place it in a dry and well-venlated environment.

●DO NOT aim the lens at the sun or any other bright light.

●Make sure the running environment meets the requirement of the device. The operang

temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the humidity shall be 95%operang

or less (no condensing).

●DO NOT place the camera in extremely hot, cold, dusty or damp locaons, and do not expose it

to high electromagnec radiaon.

Emergency

●If smoke, odor, or noise arises from the device, immediately turn the power, unplug theo

power cable, and contact the service center.

Network Camera User Manual

viii

Contents

Chapter 1 Device and Accessing ................................................................................. 1Acvaon

1.1 Acvate Device ...................................................................................................................... 1

1.1.1 Acvate via SADP .......................................................................................................... 1

1.1.2 Acvate Camera via iVMS-4200 .................................................................................... 2

1.1.3 Acvate Device via Web Browser .................................................................................. 3

1.2 Access Camera ....................................................................................................................... 4

1.2.1 Access Camera via Web Browser .................................................................................. 4

1.2.2 Access Camera via iVMS-4200 ...................................................................................... 6

1.2.3 Access Camera via Hik-Connect .................................................................................... 6

Chapter 2 Network Camera Conguraon ................................................................................ 11

2.1 Update Firmware ................................................................................................................. 11

2.2 System Requirement ............................................................................................................ 11

2.3 Live View .............................................................................................................................. 11

2.3.1 Live View Parameters .................................................................................................. 11

2.3.2 Set Transmission Parameters ...................................................................................... 15

2.3.3 Set Smooth Streaming ................................................................................................ 16

2.4 Video and Audio .................................................................................................................. 17

2.4.1 Video Sengs ............................................................................................................. 17

2.4.2 ROI .............................................................................................................................. 21

2.4.3 Display Info. on Stream ............................................................................................... 22

2.4.4 Audio Sengs ............................................................................................................. 22

2.4.5 Two-way Audio ............................................................................................................ 23

2.4.6 Display ........................................................................................................... 24Sengs

2.4.7 OSD ............................................................................................................................. 30

2.4.8 Set Privacy Mask ......................................................................................................... 30

2.4.9 Overlay Picture ............................................................................................................ 30

Network Camera User Manual

2.4.10 Set Target Cropping ................................................................................................... 31

2.5 Video Recording and Picture Capture .................................................................................. 31

2.5.1 Storage Sengs .......................................................................................................... 31

2.5.2 Video Recording .......................................................................................................... 36

2.5.3 Capture Conguraon ................................................................................................. 38

2.6 Event and Alarm ................................................................................................................... 40

2.6.1 Basic Event .................................................................................................................. 40

2.6.2 Smart Event ................................................................................................................. 46

2.7 Network .................................................................................................................. 56Sengs

2.7.1 TCP/IP .......................................................................................................................... 56

2.7.2 SNMP .......................................................................................................................... 58

2.7.3 Set SRTP ...................................................................................................................... 58

2.7.4 Port Mapping .............................................................................................................. 59

2.7.5 Port ............................................................................................................................. 61

2.7.6 Access to Device via Domain Name ............................................................................ 62

2.7.7 Access to Device via PPPoE Dial Up ......................................................... 62Connecon

2.7.8 Wireless Dial ............................................................................................................... 63

2.7.9 Wi-Fi ............................................................................................................................ 64

2.7.10 Set Network Service .................................................................................................. 64

2.7.11 Set Open Network Video Interface ........................................................................... 65

2.7.12 Set ISUP ..................................................................................................................... 66

2.7.13 Set Alarm Server ....................................................................................................... 66

2.8 Arming Schedule and Alarm Linkage ................................................................................... 67

2.8.1 Set Arming Schedule ................................................................................................... 67

2.8.2 Linkage Method Sengs ............................................................................................. 67

2.9 System and Security ............................................................................................................. 71

2.9.1 View Device Informaon ............................................................................................. 71

2.9.2 Search and Manage Log .............................................................................................. 72

Network Camera User Manual

2.9.3 Simultaneous Login ..................................................................................................... 72

2.9.4 Import and Export Conguraon File ......................................................................... 72

2.9.5 Export Diagnose Informaon ...................................................................................... 72

2.9.6 Reboot ........................................................................................................................ 72

2.9.7 Restore and Default .................................................................................................... 72

2.9.8 Upgrade ...................................................................................................................... 73

2.9.9 Device Auto Maintenance ........................................................................................... 73

2.9.10 View Open Source Soware License ......................................................................... 74

2.9.11 Wiegand .................................................................................................................... 74

2.9.12 Metadata .................................................................................................................. 74

2.9.13 Time and Date ........................................................................................................... 74

2.9.14 Set RS-485 ................................................................................................................. 76

2.9.15 Set RS-232 ................................................................................................................. 76

2.9.16 Power Mode ....................................................................................... 76Consumpon

2.9.17 External Device ......................................................................................................... 77

2.9.18 Security ..................................................................................................................... 78

2.9.19 Cercate Management ........................................................................................... 82

2.9.20 User and Account ...................................................................................................... 84

2.10 VCA Resource ..................................................................................................................... 85

2.10.1 Allocate VCA Resource .............................................................................................. 85

2.10.2 Set Open Plaorm ..................................................................................................... 85

2.10.3 Road Trac ............................................................................................................... 86

2.10.4 Face Capture ............................................................................................................. 90

2.11 Smart Display ..................................................................................................................... 93

2.12 EPTZ ................................................................................................................................... 94

2.12.1 Patrol ......................................................................................................................... 94

2.12.2 Auto-Tracking ............................................................................................................ 95

2.13 Image Stching .................................................................................................................. 95

Network Camera User Manual

xii

Appendix A. FAQ ...................................................................................................................... 97

Appendix B. Device Command .................................................................................................. 98

Appendix C. Device Communicaon Matrix .............................................................................. 99

Network Camera User Manual

xiii

Status of the device becomes successful Acve aer acvaon.

5. Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your computer by either modifying the IP

address manually or checking .Enable DHCP

3) Input the admin password and click to Modify acvate your IP address modicaon.

1.1.2 Acvate Camera via iVMS-4200

iVMS-4200 is a PC client to manage and operate your devices. Camera is supported byacvaon

the soware.

Before You Start

●Get the client soware ocial from the supplied disk or the website hp://

www.hikvision.com/en/ . Install the following the prompts.soware

●The camera and the PC that runs the soware should be in the same subnet.

Steps

1. Run the client soware.

2. Enter Device Management Online Device or .

3. Check the device status from the device list, and select an inacve camera.

4. Click the Acvate.

5. Create and conrm the admin password of the camera.

Network Camera User Manual

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case lower caseleers,

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can protect your product.beer

6. Click to start OK acvaon.

Device status change to successful Acve aer acvaon.

7. Modify IP address of the device.

1) Select the device and click Modify Nenfo at .Online Device

2) Change the device IP address to the same subnet with your computer by either modifying the

IP address manually or checking .DHCP

3) Input the admin password of the device and click to complete OK modicaon.

1.1.3 Acvate Device via Web Browser

Use web browser to acvate the device. For the device with the DHCP enabled by default, use

SADP soware acvate or PC client to the device.

Before You Start

Make sure your device and your PC connect to the same LAN.

Steps

1. Change the IP address of your PC to the same subnet as the device.

The default IP address of the device is 192.168.1.64.

2. Open a web browser and input the default IP address.

3. Create and conrm the admin password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case lower caseleers,

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can protect your product.beer

4. Click to complete and enter page.OK acvaon Live View

5. Modify IP address of the camera.

1) Enter IP address modicaon page. Conguraon → Network → TCP/IP

2) Change IP address.

3) Save the sengs.

Network Camera User Manual

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2CD2546G2-I
Kode for international beskyttelse (IP):	IP67
Type:	IP-sikkerhedskamera
Højde:	57.4 mm
Vægt:	380 g
Produktfarve:	Hvid
Pakkevægt:	620 g
Pakkedybde:	134 mm
Pakkebredde:	134 mm
Kompatible hukommelseskort:	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Wi-Fi:	Ingen
Bluetooth:	Ingen
Formfaktor:	Kuppel
Opbevaringstemperatur (T-T):	-30 - 60 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	0 - 95 %
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Driftstemperatur (T-T):	-30 - 60 °C
Maksimal opløsning:	2688 x 1520 pixel
Husmateriale:	Aluminium
Forbindelsesteknologi:	Ledningsført
Strømforbrug (maks.):	5.5 W
Netværksstandarder:	IEEE 802.1x, IEEE 802.3af
Understøttede netværksprotokoller:	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1 (except for -W model), QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, ARP
Webbaseret administration:	Ja
Knap til nulstilling:	Ja
Servicekvalitet support (QoS):	Ja
IP-adresse filtrering:	Ja
Strømkilde type:	DC, PoE
Monteringstype:	Loft/væg
Diameter:	110 mm
Indbygget kortlæser:	Ja
Indbygget HDD:	Ingen
Video komprimeringsformater:	H.264, H.264+, H.265, H.265+, M-JPEG
Understøttet placering:	Udendørs
Antal brugere:	32 bruger(e)
Sensortype:	CMOS
Samlet antal megapixels:	4 MP
Støjreduktion:	Ja
Maksimal størrelse på hukommelseskort:	256 GB
Hældningsvinkelområde:	0 - 75 °
Progressiv scanning:	Ja
Bredt dynamikområde (WDR):	Ja
Dag/nat funktion:	Ja
Infrarød (IR) cut-off filter:	Ja
IK kode:	IK08
Kamerapanorering kontrol:	Ja
Kontrol af kamerahældning:	Ja
Minimumsbelysning:	0 Lux
Panoreringsområde:	-30 - 30 °
Rotationsvinkel:	360 °
Antal sensorer:	1
Optisk sensorstørrelse:	1/3 "
Maksimale blænderåbning tal:	1.4
Fast brændvidde:	2.8 mm
Nattesyn:	Ja
LED type:	IR
Billedhastighed:	30 fps
Justering af billedkvalitet:	Brightness, Contrast, Saturation, Sharpness
Fortrolighedspolitik maskering:	Ja
Ethernet-grænsefladetype:	Hurtigt ethernet
Bevægelsessensor (video):	Ja
HTTPS -kryptering:	Ja
DC udgangsspænding:	12
Antal kameraer:	1
Infrarød bølgelængde:	850 nm
Kameraets lukkerhastighed:	1/3 - 1/100000 sek./side
Videostreaming:	Ja
Antal linser:	1
Beskyttelse af adgangskode:	Ja
Nattesyn, afstand:	30 m
Intelligent Video Surveillance (IVS) systemfunktioner:	Sceneændring
Bit-rate:	32 Kbps - 8 Mbps
Spejl:	Ja
Strømforbrug (Power over Ethernet (PoE)):	6.5 W
Region of Interest (ROI) kodning:	Ja
Kompensation for baggrundslys:	Ja
Objektivets synsvinkel, diagonal:	122.5 °
Antal sprog:	33
Objektivets synsvinkel, vandret:	102.7 °
Alarmindgang/-udgang:	Ja
Objektivets synsvinkel, lodret:	55.2 °
Highlight Compensation (HLC):	Ja
Hjerteslag:	Ja
Anti-flimmer:	Ja
Støjreduktionsteknologi:	3D støjreduktion
Adfærdsanalyse:	Intrusion detection, Line crossing detection
Bitrate kontrol:	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)