Hikvision DS-2CD2T42WD-I3(6MM) Manual

Hikvision Overvågningskamera DS-2CD2T42WD-I3(6MM)

Læs nedenfor 📖 manual på dansk for Hikvision DS-2CD2T42WD-I3(6MM) (2 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

WARNING

To prevent fire or shock hazard, do not expose the unit to

rain or moisture.

Do not install the appliance in a confined space, such as

a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

apparatus with newspapers, tablecloths, curtains, etc. And

don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled

with liquids, such as vases, on the apparatus.

CAUTION

The use of optical instruments with this product will

increase eye hazard.

Certain countries may regulate disposal of the battery used

to power this product. Please consult with your local

authority.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN

• DO NOT STARE INTO BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENT

The validity of the CE marking is restricted to only those

countries where it is legally enforced, mainly in the

countries EEA (European Economic Area).

Owner’s Record

The model number and the serial number are located at the

rear of the CD player. Record the serial number in the

space provided below. Refer to these numbers whenever

you call upon your Aiwa dealer regarding this product.

Model No. XP-ER800N

Serial No.

For the customers in the USA

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

– Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

Declaration of Conformity

Trade Name: AIWA

Model No.: XP-ER800N

Responsible Party: Sony Electronics Inc.

Address: 680 Kinderkamack Road,

Oradell, NJ 07649

USA

Telephone No.: 201-930-6973

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Power Sources

To use the batteries (B)

Use only the following batteries for your CD player:

Dry batteries

• LR6 (size AA) alkaline batteries (not supplied)

Rechargeable batteries

Charge the rechargeable batteries before using them for

the first time.

• Commercially-available size AA Ni-MH rechargeable

batteries of 1.2 V DC, 700 mAh

To insert the batteries

Open the battery compartment lid on the rear of your CD

player.

2Insert two batteries by matching the to the diagram)

in the battery compartment and close the lid until it

clicks into place.

3When using the rechargeable batteries, connect the

commercially-available AC power adaptor to the DC

IN 4.5V jack of your CD player and an AC outlet,

then press /OFF/CHARGE while the CD player iss

turned off to start charging.

The CD player charges the batteries. The “CHG”

indicator turns on in the display and the the indicator

sections of light up in succession. When the

batteries are completely charged, the “CHG” and

indicators get turned off.

If you press /OFF/CHARGE after the charge hass

already been completed, the indicator flashes

and “Full” appears in the display.

4Disconnect the AC power adaptor.

Label side up

3-252-981-21 (1)

CD player (front)

to an AC outlet

DC IN 4.5 V

(external power

input) jack

Insert the end first (for both batteries).(

AC power

adaptor

Headphones

Open the battery compartment lid.

*The button has a tactile dot.

Strap holes

4SOUND

Display

8r t/

SKIP/SEARCH

0MODE

DC IN

4.5V

\ (headphones)

jack

!HOLD

@VOL +*/–

9ca*

567 (stop)/OFF/CHARGEs

Display

3BAND

Battery life* (approx. hours)

(When the CD player is used on a flat and stable place.)

Playing time varies depending on how the CD player is used.

E•A•S•S E•A•S•S Radio

Two Sony alkaline 38 32 58

batteries LR6 (SG)

(produced in Japan)

* Measured value by the standard of JEITA (Japan

Electronics and Information Technology Industries

Association).

To check the remaining power of the

batteries

You can check it in the display.

Replace the batteries when “ ” flashes.

Lo batt*

* Beep sounds.

Notes

• The indicator sections of roughly shows the

remaining battery power. One section does not always

indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of may increase or decrease.

Notes on using the dry batteries

• Be sure to remove the AC power adaptor.

• When the batteries are depleted, replace both batteries

with new ones.

Notes on the rechargeable batteries

• To keep the original battery capacity for a long time,

charge the batteries only when they are completely

depleted.

• If the battery is new or has not been used for a long

time, it may not be charged completely until you charge

and discharge it several times.

• When carrying the rechargeable batteries, use the

battery carrying case supplied with the rechargeable

batteries to prevent unexpected heat. If the rechargeable

batteries and the metallic objects get contacted, heat or

fire may occur due to a short circuit.

When to replace the rechargeable

batteries

If the battery life becomes shorter by about half, replace

the batteries with new rechargeable batteries.

To use the AC power adaptor (C)

1Connect the commercially-available AC power

adaptor whose rated output is 4.5 V DC, 500 mA, to

an AC outlet.

Playing a CD

To insert a CD

1Slide OPEN to open the lid (A).

2Fit the CD to the pivot, then close the lid (D).

Notes

• This CD player can play discs recorded in the Compact

Disc Digital Audio (Audio CD) format.

• This CD player can play CD-Rs/CD-RWs recorded in

the Compact Disc Digital Audio (Audio CD) format,

but playback capability may vary depending on the

quality of the disc and the condition of the recording

device.

• This product is designed to play back discs that conform

to the Compact Disc (CD) standard.

Recently, various music discs encoded with copyright

protection technologies are marketed by some record

companies. Please be aware that among those discs,

there are some that do not conform to the CD standard

and may not be playable by this product.

To operate the CD player

Button/Switch and its Function/Operation

1ENTER/DISPLAY

Press to check the remaining time on the CD and the

number of tracks left. Also press to enter the selected

track for the PGM play.

2PRESET CALL UP/DOWN

Press to select the preset station you want.

3BAND

Press to turn on the radio. Press also to change the

band.

4SOUND

Use to emphasize the bass-boosted sound. Press

repeatedly to select or .

enhances more than .*

5s(stop)

Press to stop playing.

6OFF

Press to turn off the radio.

7CHARGE

Press to start charging.

8r t/ (skip/search)

For CD player: Press once to find ther or t

beginning of the current/next track.

Press r or t repeatedly to find the beginning

of the previous/ succeeding tracks.

Press and hold to go backward/forwardr or t

quickly.

For radio: Press to tune in the station you want.

9ca (play/pause)

Press to start play. Press again to pause play.

To play from the first track, press for 2 seconds or

more while the CD player is stopped.

Button/Switch and its Function/Operation

0MODE

For CD player: Press repeatedly until the play mode

you want appears in the display.

No indication: Normal play

“1”: Single play

“SHUF”: Shuffle play

“PGM”: PGM (program) play

To repeat the play mode you selected, press and hold

until “ ” appears.

For radio: Press until “ST” disappears from the

display to improve the receiving condition on FM.

! HOLD

Use to lock the controls to prevent accidental button

presses.

@ VOL+/–

Press to adjust the volume.

* If the sound is distorted when using the SOUND function,

turn down the volume.

To protect against sound skipping

The E•A•S•S function has been developed to provide

excellent protection against sound skipping during many

active uses.

1Insert a disc and wait until the display goes off.

2While holding MODE, press ca.

3Press MODE to select the E•A•S•S mode.

When you select “E•A•S•S”, the E•A•S•S function is

enhanced compared to “E•A•S•S ”.

To walk with the CD player and enjoy high quality

CD sound using the E•A•S•S function, select

“E•A•S•S ”. While taking harder exercises, it is

recommended that you set it to “E•A•S•S.”

4Press ENTER/DISPLAY.

Note

Sound may skip:

– if the CD player receives stronger continuous shock than

expected,

– if a dirty or scratched CD is played or

– when using poor-quality CD-Rs/CD-RWs or if there is a

problem with the recording device or application software.

Checking the remaining time on the CD

and the number of tracks left

You can check the remaining time on the CD and the

number of racks left using ENTER/DISPLAY.

1Press ENTER/DISPLAY.

Each time you press the button, the display changes as

follows:

Display

Normal play Track number and

elapsed playing time

Press ENTER/DISPLAY once.

Track number and

remaining time on the

current track.

Press ENTER/DISPLAY once again.

The number of tracks left

and remaining time on

the CD*

*Not displayed during the Single play and Shuffle play.

To remove the CD

Remove the CD while pressing the pivot.

To turn off the operation beep

sound

You can turn off the beep sound that is heard from your

headphones when you operate your CD player.

1Remove the power source (AC power adaptor, dry

batteries) from the CD player, and wait for about 3

seconds.

2Connect the power source while pressing s/OFF/

CHARGE.

To turn on the beep sound

Remove the power source, wait for about 3 seconds, and

then connect the power source without pressing s/OFF/

CHARGE.

Playing tracks in your

favorite order (PGM play)

You can program the CD player to play up to 24 tracks in

your favorite order.

1During playback, press MODE repeatedly until

“PGM” flashes.

2Press r or t to select a track.

3Press ENTER/DISPLAY to enter the selected track.

“00” appears and the playing order increases

by one.

4Repeat steps 2 and 3 to select the tracks in your

favorite order.

5Press and hold ENTER/DISPLAY until the PGM play

starts.

2PRESET CALL UP/DOWN

1ENTER/DISPLAY

AOPEN

TV/WB/FM/AM

Portable CD Player

Operating Instructions

XP-ER800N

http://www.aiwa.com/

To check the program

During programming, press ENTER/DISPLAY repeatedly

before step 5. Each time you press ENTER/DISPLAY, the

track number appears.

Note

• When you finish entering the 24th track in step 3, the

first selected track appears in the display.

• During the PGM play, you cannot check the program.

To cancel PGM play

During programming or PGM play, press MODE once so

that “PGM” disappears.

(Continue to the reverse side)

Play modeTrack number/PRESET number

Sound mode

Playing time/

Frequency

PRESET

E•A•S•S

Remaining

battery power

BandST

VOL CHG

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2CD2T42WD-I3(6MM)
Kode for international beskyttelse (IP):	IP67
Type:	IP-sikkerhedskamera
Bredde:	299.71 mm
Dybde:	86.48 mm
Højde:	85.11 mm
Vægt:	1200 g
Produktfarve:	Black, White
Wi-Fi:	Ingen
Formfaktor:	Kasse
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Understøttede videoformater:	H.264, H.264+, M-JPEG
Driftstemperatur (T-T):	-30 - 60 °C
Forbindelsesteknologi:	Ledningsført
Strømforbrug (maks.):	6 W
Kabelteknologi:	10/100Base-T(X)
Understøttede netværksprotokoller:	TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
IP-adresse filtrering:	Ja
Monteringstype:	Væg
Indbygget HDD:	Ingen
Sensortype:	CMOS
Samlet antal megapixels:	4 MP
Progressiv scanning:	Ja
Bredt dynamikområde (WDR):	Ja
Dag/nat funktion:	Ja
Minimumsbelysning:	0.01 Lux
Optisk sensorstørrelse:	1/3 "
Nattesyn:	Ja
LED type:	IR
Ethernet-grænsefladetype:	Hurtigt ethernet
Bevægelsessensor (video):	Ja
DC udgangsspænding:	12
Antal kameraer:	1
Synsfelt vinkel (FOV):	55.4 °
Nattesyn, afstand:	30 m
Aktiv manipulering af alarm:	Ja