Hisense 86DM66D Manual

Hisense Skærm 86DM66D

Læs nedenfor 📖 manual på dansk for Hisense 86DM66D (65 sider) i kategorien Skærm. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/65
RSAG2.025.9062SS-2 A
Read the manual carefully and ensure you have fully understood
its contents before operating this device for the first time.
English
I
Declaration
Any content and service accessed through this device, while only intended for individual non-
commercial use, shall be the property of the applicable third party and subject to protection by
regulations and laws on copyright, patent, trademark and other intellectual property rights. No
part of such content and service may be modified, duplicated, published, uploaded, distributed,
translated, marketed, or used to make and distribute products derived from it without the prior
permission of the content owner or service provider.
You acknowledge and agree explicitly that you will solely bear the risk associated with the use of
this device, and further you will solely bear any risk related to satisfactory quality, performance
and accuracy for any content and service accessed through this device. To the maximum extent
permitted by applicable law, this device and any third party’s content and service is provided as it
is without any guarantee, express or implied.
Manufacturer hereby declare explicitly that Manufacturer shall not be held liable for any guarantee
and conditions, express or implied, related to this device and any content and service, including
but not limited to warranty on marketability, satisfactory quality, fitness for a particular purpose,
accuracy, quiet use and non-violation of any third party’s rights; to the maximum extent permitted
by applicable law, Manufacturer gives no guarantee on the accuracy, validity, timeliness,
legitimacy and completeness of any content or service provided through this device, or the
fitness of such device, content or service for your particular requirement, or the protection from
interruption and error during operation of such device, content or service; to the maximum extent
permitted by applicable law, in any case, including fault or neglect, Manufacturer shall not be
held liable for legal actions or indemnity obligation arising from any consequence as a result of or
related to any information loaded in this device or use of such device, content or service by you or
any third party .
Any content and service provided as it is together with this device shall be the property of the
applicable third party, therefore Manufacturer gives no declaration or warranty on modification,
suspension, cancellation, termination or abortion thereof, and shall not be held liable for legal
actions or indemnity obligation arising thereof.
Manufacturer reserves the rights to restrict the use or access of certain content or service. As
the content and service are transmitted through third party’s network and transmission facilities,
Manufacturer undertakes no customer service thereof or the obligation for such customer service.
Statement
The pictures and instructions in this user manual are for reference only, and may be
different from the actual product. Please subject to the actual product. (This statement is
throughout this User Manual)
Quality upgrades, product design and specifications are subject to change without notice.
The software content service applicable to this product depends on the third party
provider, and some software may not be used due to network, region, service cycle and
other problems, which has nothing to do with the product quality. Please contact the third
party provider for relevant details.
II
Disposal of Used Electrical & Electronic Equipment
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
Do not open the back cover.
In no case the user is allowed to operate
inside the device.
Only a qualified technician is entitled to
operate.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
ATTENTION
RISK OF SHOCK
ELECTRIC
Packaging and electrical goods should be recycled appropriately, and
not treated as household waste. Please dispose of this equipment at
your applicable collection point for the recycling of electrical & electronic
equipment waste. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to
human health, which could otherwise be caused by unsuitable waste
handling of this product. The recycling of materials will help conserve
natural resources. Please do not therefore dispose of your old electrical
and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.
DC voltage: This symbol indicates that the rated voltage marked with the
symbol is DC voltage.
Class I product: 75''/ 86'' requires a safety connection of protective earthing
(ground).
Important Safety Precautions
The device set may fall, causing serious personal injury or death.
To prevent injury, this device set must be securely attached to
thewall in accordance with the installation instructions.
Warning!
Stability Hazard
III
Please read the following safeguards for your device and retain for future reference.
Always follow all warnings and instructions marked on the device.
1. A note about safety and operating instructions
Read and follow all safety and operating instructions, and retain them safely for future
reference.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the device from the wall outlet before cleaning. Do not use liquid, abrasive, or
aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a
lightly dampened cloth for cleaning.
4. Water and Moisture
Avoid dripping or splashing of liquids onto the product. Objects filled with liquids, such
as vases, should not be placed on the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure reliable
operation of the device and to protect it from overheating. Do not cover the ventilation
openings in the cabinet and never place the set in a confined space such as built-in
cabinet unless proper ventilation is provided. Leave a minimum 10cm gap all around
the unit.
6. Power Source
This device should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult
your appliance dealer or local power company.
7. Power-Cord Protection
Power- supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at
plug, wall outlets, and the point where they exit from the device. MAIN plug is used as
the disconnect device, the disconnect device shall remain readily operable.
8. Lightning
For added protection for this device during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to the device due to lightning or
power-line surge.
Safeguards
V
16. Fire
The product should be situated away from naked flame sources such as lighted candle.
17. Off-gassing
The device smells of plastic is normal and will dissipate over time.
Incorrect replacement of the battery may lead to the risk, including the replacement of
another similar or the same type. Do not expose batteries to heat such as sun or fire or
something like that.
The device should not be exposed to dripping and spraying and it cannot be placed
under objects filled with liquids.
MAIN plug on the power cord is used as the disconnect device, the disconnect
deviceand socket-outlet shall be easily accessible.
Apparatus with CLASS I construction(75''/ 86'') shall be connected to a MAINS socket
outlet with a protective earthing connection.
VI
Wall
Precautions for Installation
As shown in the figure below, leave a ventilation space around the device.
Please leave this space
around the device.
When mounted on the wall:
Do not install the device as shown below.
Hinder air circulation
Insufficient ventilation will overheat the device and may cause
damage to the device and even fire.
Start Guide
10cm10cm
10cm
10cm
When installing this device on a vertical wall, the distance A between the product
and the wall should be kept at least 10cm to facilitate ventilation.
A
1
CONTENTS
CONTENES 1 ...............................................................................................................
Accessories List......................................................................................................... 2
Wall Mount (Optional) 2 ................................................................................................
Remote Control 6 .........................................................................................................
Control Panel 9 .............................................................................................................
Terminal Introduction 10 ...............................................................................................
Initial Startup............................................................................................................ 12
Setting 13 .....................................................................................................................
RS232...................................................................................................................... 23
Miscellaneous 33 ..........................................................................................................
Specications .......................................................................................................... 34
2
Wall Mount (Optional)
2
Accessories List
Remote Control × 1 Battery(AAA) × 2
Quick Setup Guide
× 1 Warranty Card×1(Optional)
RS232 Converter Cable ×1(Optional)
Power Cord (It depends on the regions or countries.)
1
1. Before installing the wall-mount bracket, rst place the machine on a secure and
clean desktop with soft protective cloth. Confirm that the desktop is solid and
reliable since the machine is heavy.
2. Remove the wall-mount screws in the wall-mount holes of the rear shell. (Ignore
this step in the absence of wall-mount screws. )
3. To avoid damage of the machine, please install the wall mount strictly in the
sequence of rollers, wall-mount bracket and wall-mount screws.
4. Before hanging the machine, please conrm that the wall-mount bracket is installed
securely without looseness.
5Slowly peel o󰀨 the protective tape around the front shell.
NOTE
Items may di󰀨er in di󰀨erent locations
Display design and accessories may di󰀨er from the images shown.
3
6Slowly peel o󰀨 the panel protective lm on the machine by folding it 180 degrees
along the torn lm label.
Statement
To use this device in portrait mode, rotate it counterclockwise in reverse until the
power indicator light is as shown in the following gure.
Note
This device can tilt up to 15 degrees forward from a vertical wall.
The pictures are for reference only. For detailed information on installing wall
mounted brackets, please refer to the manual provided with the wall mounted
bracket.
15°
4
Note
This machine is used in conjunction with Hisense LG400030D (32''/43''/50''/55''/65''
) and LG60060BE (75''/86'') wall mounted brackets; Using non designated wall
mounted brackets together may cause instability and injury.Product defects caused
by unauthorized installation by Hisense are not covered by the warranty.
If installation instructions are not followed or non Hisense authorized installation
services or accessories are used, there may be safety hazards (including but not
limited to product falling or falling o󰀨) and personal injury or property damage may
occur. Such damage or loss is not caused by Hisense Company and should be
borne by the corresponding party at fault.
When using wall mounted installation, to avoid damage to the device or personal
injury, please install at an angle of less than 15 ° on a vertical wall.
Rear shell
Cushion block
Screw
LCD sreen
H
VESA wall mount
standard (mm)
200×200 (32'')
300×300 (43''/50''/55'')
400×400 (65'')
600×400 (75''/86'')
Diameter of wall-
mount screw (mm) M6
Number of wall
mounting holes 4
Schematic diagram of wall
mounting holes
B
A
5
Note
Only the installation specication of the wall mount is described here; the appear-
ance of rear shell is for schematic purpose only.
The screw installation depth in the wall-mount holes of the rear shell , H is : 8.0-
10.0mm32'' 12.0-13.0mm43''/75''/86''11.0-12.5mm50''/55''/65'';
overlong screws will cause irreparable damage to the equipment.
If the intactness of the machine cannot be guaranteed during wall mounting, please
contact professional installation personnel or technical support personnel.
This wall mount is suitable for concrete and brick walls. For plank and plasterboard
walls, special reinforcement is required instead of directly using the wall mount.
Ensure that a single expansion bolt xed in the wall can bear over 1/3 of the overall
weight of the machine.


Produkt Specifikationer

Mærke: Hisense
Kategori: Skærm
Model: 86DM66D

Har du brug for hjælp?

Hvis du har brug for hjælp til Hisense 86DM66D stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skærm Hisense Manualer

Skærm Manualer

Nyeste Skærm Manualer