Honda Shadow Aero (2023) Manual
Læs nedenfor 📖 manual på dansk for Honda Shadow Aero (2023) (119 sider) i kategorien Motor. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/119
OWN E R’S
MAN UAL
2023 SHADOW AERO
This manual should be considered a permanent part of the vehicle
and should remain with the vehicle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner’s manual may not match your
actual vehicle.
© 2022 Honda Motor Co., Ltd.
Welcome
Congratulations on your purchase of a new
Honda vehicle. Your selection of a Honda
makes you part of a worldwide family of
satisfied customers who appreciate Honda's
reputation for building quality into every
product.
To ensure your safety and riding pleasure:
●Read this owner's manual carefully.
●Follow all recommendations and
procedures contained in this manual.
●Pay close attention to safety messages
contained in this manual and on the
vehicle.
To protect your investment, we urge you to
take responsibility for keeping your vehicle
well-serviced and maintained. Also, observe
the break-in guidelines and always perform
the pre-ride inspection and other periodic
checks in this manual.
When service is required, remember that
your Honda dealer knows your vehicle best.
If you have the required mechanical “know-
how” and tools, you can purchase an official
Honda Service Manual to help you perform
many maintenance and repair tasks. P. 1032
Read the warranty information thoroughly so
that you understand the warranty coverage
and are aware of your rights and
responsibilities. P. 1042
You may also want to visit our website at
www.powersports.honda.com.
Happy riding!
A Few Words About Safety
Your safety, and the safety of others, is very
important. Operating this vehicle safely is an
important responsibility.
To help you make informed decisions about
safety, we have provided operating
procedures and other information on safety
labels and in this manual. This information
alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to
warn you about all hazards associated with
operating or maintaining a vehicle. You must
use your own good judgment.
You will find important safety information in a
variety of forms, including:
●Safety labels on the vehicle
●
Safety Messages preceded by a safety alert
symbol and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
3DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3CAUTION
You CAN be HURT if you don’t follow
instructions.
Other important information is
provided under the following titles:
NOTICE Information to help you avoid
damage to your vehicle, other
property, or the environment.
Contents
Vehicle Safety P. 2
Operation Guide P. 16
Maintenance P. 31
Troubleshooting P. 72
Information P. 86
Specifications P. 110
Safety Guidelines.................................................P. 3
Safety Labels.........................................................P. 7
Safety Precautions............................................... P. 9
Riding Precautions............................................ P. 10
Accessories & Modifications........................... P. 14
Loading ................................................................P. 15
This section contains important information for safe riding of your vehicle.
Please read this section carefully.
Vehicle Safety
We recommend that all riders take a certified
course approved by the Motorcycle Safety
Foundation (MSF) or a state approved training
course. New riders should start with the basic
course, and even experienced riders will find the
advanced course beneficial.
For information about the MSF training course
nearest you, call the national toll-free number:
(800) 446-9227.
Other riding tips can be found in the You and
Your Motorcycle Riding Tips booklet that came
with your vehicle.
Ride Defensively
Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
evasive maneuver.
Make Yourself Easy to See
Make yourself more visible, especially at night,
by wearing bright reflective clothing, positioning
yourself so other drivers can see you, signaling
before turning or changing lanes, and using
your horn when necessary.
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
inattention can impair your ability to use good
judgment and ride safely.
Safety Guidelines
Vehicle Safety
4
Don't Drink or Use Drugs and Ride
Alcohol or drugs and riding don't mix. Even one
alcoholic drink can reduce your ability to
respond to changing conditions, and your
reaction time gets worse with every additional
drink. The same is true for drug use. Don't drink
or use and ride, and don't let your friends do it
either.
Keep Your Honda in Safe Condition
It's important to keep your vehicle properly
maintained and in safe riding condition.
Inspect your vehicle before every ride and
perform all recommended maintenance. Never
exceed load limits ( P. 15), and do not modify2
your vehicle or install accessories that would
make your vehicle unsafe ( P. 14).2
If You are Involved in a Crash
Personal safety is your first priority. If you or
anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
assistance if needed. Also follow applicable laws
and regulations if another person or vehicle is
involved in the crash.
If you decide to continue riding, first turn the
ignition switch to the OFF position, and evaluate
the condition of your vehicle. Inspect for fluid
leaks, check the tightness of critical nuts and
bolts, and check the handlebar, control levers,
brakes, and wheels. Ride slowly and cautiously.
Your vehicle may have suffered damage that is
not immediately apparent. Have your vehicle
thoroughly checked at a qualified service facility
as soon as possible.
Safety Guidelines
Vehicle Safety
5
Continued
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, a
colorless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and
may lead to death.
If you run the engine in a confined or even
partly enclosed area, the air you breathe could
contain a dangerous amount of carbon
monoxide.
Never run your vehicle inside a garage or other
enclosure.
3WARNING
Running the engine of your vehicle
while in an enclosed or even partially
enclosed area can cause a rapid build-
up of toxic carbon monoxide gas.
Breathing this colorless, odorless gas
can quickly cause unconsciousness and
lead to death.
Only run your vehicle's engine when it
is located in a well ventilated area
outdoors.
Safety Guidelines
Vehicle Safety
6
Safety Labels
Safety and information labels on your vehicle
provide important safety information and may
warn you of potential hazards that could cause
serious injury. Read these labels carefully and
don't remove them.
If a label comes off or becomes hard to read,
contact your dealer for a replacement.
Safety Labels
Vehicle Safety
7
Continued
Safety Labels
Vehicle Safety
8
Safety Precautions
●Ride cautiously and keep your hands on the
handlebar and feet on the footpegs.
●Instruct your passenger to keep their hands
on the seat strap or your waist and their feet
on the footpegs while riding.
●Always consider the safety of your
passenger, as well as other drivers and
riders.
Protective Apparel
Make sure that you and any passenger are
wearing an approved helmet, eye protection,
and high-visibility protective clothing. Avoid
wearing loose clothes that could get caught on
any part of the vehicle. Ride defensively in
response to weather and road conditions.
#
Helmet
Should be safety-standard certified, high-
visibility, and the correct size for your head.
●Must fit comfortably but securely, with the
chin strap fastened
●Face shield with unobstructed field of vision
or other approved eye protection
Look for a DOT (Department of Transportation)
certification label on any helmet you buy.
3WARNING
Not wearing a helmet increases the
chance of serious injury or death in a
crash.
Make sure that you and any passenger
always wear an approved helmet and
protective apparel.
#
Gloves
Full-finger leather gloves with high abrasion
resistance
Safety Precautions
Vehicle Safety
9
Continued
#
Boots or Riding Shoes
Sturdy boots with non-slip soles and ankle
protection
#
Jacket and Pants
Protective, highly visible, long-sleeved jacket
and durable long pants for riding (or a
protective suit)
Riding Precautions
Break-in Period
During the first 300 miles (500 km) of running,
follow these guidelines to ensure your vehicle's
future reliability and performance.
●Avoid full-throttle starts and rapid
acceleration.
●Avoid hard braking and rapid down-shifts.
●Ride conservatively.
Brakes
Observe the following guidelines:
●Avoid excessively hard braking and
downshifting.
uSudden braking can reduce the vehicle's
stability.
uWhere possible, reduce speed before
turning; otherwise you risk sliding out.
Riding Precautions
Vehicle Safety
10
●Exercise caution on low traction surfaces.
uThe tires slip more easily on such
surfaces and braking distances are
longer.
●Avoid continuous braking.
uRepeated braking, such as when
descending long, steep slopes can
seriously overheat the brakes, reducing
their effectiveness. Use engine braking
with intermittent use of the brakes to
reduce speed.
●For full braking effectiveness, operate both
the front and rear brakes together.
#
Combined ABS
VT750CS
Your vehicle's rear brake system is linked to the
front brake. This means that operating the rear
brake pedal applies the rear brake and a
portion of the front brake.
Operating the front brake lever applies only the
front brake.
For full braking effectiveness, operate both the
front and rear brakes together.
This model is also equipped with an Anti-lock
Brake System (ABS) designed to help prevent
the brakes from locking up during hard braking.
●ABS does not reduce braking distance. In
certain circumstances, ABS may result in a
longer stopping distance.
●ABS does not function at speeds below 6
mph (10 km/h).
●The brake lever and pedal may recoil slightly
when applying the brakes. This is normal.
●Always use the recommended tires to
ensure correct ABS operation.
Riding Precautions
Vehicle Safety
11
Continued
#
Engine Braking
Engine braking helps slow your vehicle down
when you release the throttle. For further
slowing action, downshift to a lower gear. Use
engine braking with intermittent use of the
brakes to reduce speed when descending long,
steep slopes.
#
Wet or Rainy Conditions
Road surfaces are slippery when wet, and wet
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet
conditions.
If the brakes get wet, apply the brakes while
riding at low speed to help them dry.
Parking
●Park on a firm, level surface.
●If you must park on a slight incline or loose
surface, park so that the vehicle cannot
move or fall over.
●Make sure that high-temperature parts
cannot come into contact with flammable
materials.
●Do not touch the engine, muffler, brakes
and other high-temperature parts until they
cool down.
●To reduce the likelihood of theft, always lock
the handlebar and remove the key when
leaving the vehicle unattended.
Use of an anti-theft device is also
recommended.
Riding Precautions
Vehicle Safety
12
#
Parking with the Side Stand
1.
Stop the engine.
2.
Push the side stand down.
3.
Slowly lean the vehicle to the left until its
weight rests on the side stand.
4.
Turn the handlebar fully to the left.
uTurning the handlebar to the right
reduces stability and may cause the
vehicle to fall.
5.
Turn the ignition switch to the OFF position
and remove the key.
6.
Lock the steering. P. 242
Refueling and Fuel Guidelines
Follow these guidelines to protect the engine,
fuel system and catalytic converter:
●Use only unleaded gasoline.
●Use the recommended octane number.
Using lower octane gasoline will result in
decreased engine performance.
●Do not use fuels containing a high
concentration of alcohol. P. 1022
●Do not use stale or contaminated gasoline
or an oil/gasoline mixture.
●Avoid getting dirt or water in the fuel tank.
Riding Precautions
Vehicle Safety
13
Accessories &
Modifications
We strongly advise that you do not add any
accessories that were not specifically designed
or approved for your vehicle by Honda or make
modifications to your vehicle from its original
design. Doing so can make it unsafe.
Modifying your vehicle may also void your
warranty and make your vehicle illegal to
operate on public roads. Before deciding to
install accessories on your vehicle, be certain
the modification is safe and legal.
3WARNING
Improper accessories or modifications
can cause a crash in which you can be
seriously hurt or killed.
Follow all instructions in this owner's
manual regarding accessories and
modifications.
Do not pull a trailer with, or attach a sidecar to,
your vehicle. Your vehicle was not designed for
these attachments, and their use can seriously
impair your vehicle's handling.
Accessories & Modifications
Vehicle Safety
14
Loading
●Carrying extra weight affects your vehicle's
handling, braking and stability.
Always ride at a safe speed for the load you
are carrying.
●Avoid carrying an excessive load and keep
within specified load limits.
Maximum weight capacity / Maximum
luggage weight 2P. 110
●Tie all luggage securely, evenly balanced,
and close to the center of the vehicle.
●Do not place objects near the lights or the
muffler.
3WARNING
Overloading or improper loading can
cause a crash and you can be seriously
hurt or killed.
Follow all load limits and other loading
guidelines in this manual.
Loading
Vehicle Safety
15
Parts Location
Operation Guide
16
Main fuse
VT750C
(P.83)
Fuse box
VT750C
(P.82)
Front brake fluid reservoir
(P.59 )
Front brake lever
Throttle grip (P.70)
Coolant reserve tank (P.56)
Engine oil fill cap/dipstick
(P.54 )
Fuel fill cap (P.28)
Rear brake fluid reservoir
VT750CS
(P.59)
Operation Guide
17
Clutch lever (P.67)
Seat (P.52)
Rear suspension spring
preload adjuster (P.71)
Side stand (P.66)
Shift lever (P.27)
Final drive oil fill hole cap
(P.58)
Battery (P.50)
Document bag (P.30)
Helmet holder (P.29)
Fuse box
VT750CS
(P.84)
Main fuse
VT750CS
(P.85)
FI fuse
VT750CS
(P.85)
Instruments
Operation Guide
18
Odometer
Odometer [ODO], Tripmeter [TRIP 1/2] &
Clock (24-hour display)
Select/Reset button
Tripmeters
Clock
Select/Reset button switches between the
odometer, tripmeters and clock.
• Odometer: Total distance ridden.
• Tripmeter: Distance ridden since tripmeter
was reset (press and hold Select/Reset button
to reset to 0.0).
Operation Guide
19
To set the clock:
aTurn the ignition switch to the ON position.
bSelect the digital clock mode.
cPress and hold the Select/Reset button until
the hour digits start flashing.
dPress the Select/Reset button until the
desired hour is displayed.
ePress and hold the Select/Reset button. The
minute digits start flashing.
fPress the Select/Reset button until the
desired minute is displayed.
gPress and hold the Select/Reset button until
the display stops flashing. The clock is set.
uThe time can also be set by turning the
ignition switch to the OFF position.
uThe display will stop flashing
automatically and the adjustment will be
cancelled if the button is not pressed for
about 30 seconds.
Indicators
Operation Guide
20
Comes on briefly when the ignition switch is turned on with
the engine stop switch in the (Run) position.
If one of these indicators does not come on when it should, have your dealer check for
problems.
Low oil pressure indicator
Comes on when the ignition switch is turned to the ON
position. Goes off when the engine starts.
If it comes on while engine is running: (P.75)
PGM-FI (Programmed Fuel Injection) malfunction
indicator lamp (MIL)
If it comes on while engine is running: (P.75)
If it comes on while riding: (P.74)
High coolant temperature indicator
Comes on when the ignition switch is turned to the ON
position. Goes off when your speed reaches approximately 6
mph (10 km/h)
ABS (Anti-lock Brake System) indicator
VT750CS
If it comes on while riding: (P.76)
Operation Guide
21
Turn signal indicator
High beam indicator
Neutral indicator
Comes on when the transmission is in Neutral.
Fuel reserve indicator
When this indicator comes on, remaining
fuel is approximately 0.92 US gal (3.5 L).
Comes on briefly when the ignition
switch is turned to the ON position.
Switches
Operation Guide
22
Should normally remain in the
(Run) position.
uIn an emergency, switch to the
(Stop) position (the starter motor will
not operate) to stop the engine.
Engine stop switch
Headlight dimmer switch
• : High beam
• : Low beam
Start button
Turn signal switch
uPressing the switch turns the
turn signal off.
Horn button
Headlight turns off when operating
the starter motor.
Operation Guide
23
Continued
Ignition switch
Switches the electrical system on/off.
uKey can be removed when in the OFF position.
ON
Turns electrical system
on for starting/riding.
OFF
Turns engine off.
Steering Lock
Lock the steering when parking to help
prevent theft.
A U-shaped wheel lock or similar device is
also recommended.
#
Locking
aTurn the handlebar all the way to the left.
bInsert the key in the steering lock and turn it
180 degrees clockwise.
cRemove the key.
#
Unlocking
Insert the key and turn it 180 degrees
counterclockwise.
Operation Guide
24
Switches (Continued)
abTurn
Ignition
key
Starting the Engine
Start your engine using the following
procedure, regardless of whether the engine
is cold or warm.
NOTICE
•If the engine does not start within 5 seconds,
turn the ignition switch to the OFF position
and wait 10 seconds before trying to start
the engine again to recover battery voltage.
•Extended fast idling and revving the engine
can damage the engine and the exhaust
system.
•Snapping the throttle or fast idling for more
than about 5 minutes may cause exhaust
pipe discoloration.
aMake sure the engine stop switch is in the
(Run) position.
bTurn the ignition switch to the ON position.
cShift the transmission to Neutral (
N
indicator comes on). Alternatively, pull in the
clutch lever to start your vehicle with the
transmission in gear so long as the side
stand is raised.
Operation Guide
25
Continued
a
b
c
d
dPress the start button with the throttle
completely closed.
uIf you cannot start the engine, open the
throttle slightly (about 0.1 in [3 mm],
without freeplay) and press the start
button.
If the engine does not start:
aOpen the throttle fully and press the start
button for 5 seconds.
bRepeat the normal starting procedure.
cIf the engine starts, open the throttle slightly
if idling is unstable.
dIf the engine does not start, wait 10 seconds
before trying steps & again.a b
#
If Engine Will Not Start (P.73)
Operation Guide
26
Starting the Engine (Continued)
About 0.1 in (3 mm), without freeplay
Refueling
Do not fill with fuel above the lower edge of
the filler neck.
Fuel type: Unleaded gasoline only
Recommended fuel octane number:
Pump Octane Number (PON) 86 or higher.
Tank capacity: 3.70 US gal (14.0 L)
#
Refueling and Fuel Guidelines (P.13)
Opening the Fuel Fill Cap
Open the lock cover, insert the ignition key,
and turn it clockwise to open the fuel fill cap.
Closing the Fuel Fill Cap
a
After refueling, align the fuel fill cap latch with
the slot in the filler neck. Push the fuel fill cap
into the filler neck until it snaps closed and locks.
b
Remove the ignition key and close the lock cover.
uThe ignition key cannot be removed if
the fuel fill cap is not locked.
3WARNING
Gasoline is highly flammable and
explosive. You can be burned or
seriously injured when handling fuel.
•Stop the engine, and keep heat,
sparks, and flames away.
•Only handle fuel outdoors.
•Wipe up spills immediately.
Operation Guide
28
Lock cover
Lower edge of
filler neck
Ignition key
Fuel fill cap
Storage Equipment
Helmet holder is located on the left side
below the seat.
#
Unlocking
Insert the ignition key and turn it
counterclockwise.
#
Locking
aHang your helmet on the holder pin and
push it in to lock.
bRemove the key.
uUse the helmet holder only when parked.
3WARNING
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a crash
in which you can be seriously hurt or
killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
Operation Guide
29
Continued
Ignition key Holder pin
Helmet holder
Space to store a document bag is located
under the seat.
#
Removing the Seat (P.52)
The tool kit is located behind the left side cover.
VT750C
The tool kit is in the compartment box.
uInsert the ignition key and turn it
counterclockwise to unlock.
#
Removing the Side Cover (P.53)
Operation Guide
30
Storage Equipment (Continued)
Document bag
Ignition key
Tool kit
Compartment box
Tool kit
VT750CS
Importance of Maintenance ........................... P. 32
Maintenance Schedule..................................... P. 34
Maintenance Record......................................... P. 37
Maintenance Fundamentals ........................... P. 38
Removing & Installing Body Components.. P. 50
Battery ....................................................................P. 50
Seat.........................................................................P. 52
Side Cover............................................................. P. 53
Engine Oil............................................................P. 54
Coolant.................................................................P. 56
Final Drive Oil..................................................... P. 58
Brakes...................................................................P. 59
Side Stand ........................................................... P. 66
Clutch ...................................................................P. 67
Throttle ................................................................ P. 70
Other Adjustments............................................ P. 71
Adjusting the Rear Suspension ........................P. 71
Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully
before attempting any maintenance. Refer to “Specifications” for service data.
An optional larger tool kit may be available.
Check with your Honda dealer's parts department.
Maintenance
Importance of Maintenance
Importance of Maintenance
Keeping your vehicle well-maintained is
absolutely essential to your safety and to
protect your investment, obtain maximum
performance, avoid breakdowns, and reduce air
pollution. Maintenance is the owner's
responsibility. Be sure to inspect your vehicle
before each ride and perform the periodic
checks specified in the Maintenance Schedule.
2P. 34
3WARNING
Improperly maintaining your vehicle or
failing to correct a problem before you
ride can cause a crash in which you can
be seriously hurt or killed.
Always follow the inspection and
maintenance recommendations and
schedules in this owner's manual.
For information about the exhaust emission and
noise emission requirements of the U.S.
Environmental Protection Agency (EPA), and the
California Air Resources Board (CARB). P. 962
Maintenance, replacement or repair of the
emission control devices and systems may
be performed by any vehicle repair
establishment or individual using parts
that are certified to EPA standards.“ ”
Maintenance
32
Maintenance Safety
Always read the maintenance instructions
before you begin each task and make sure that
you have the tools, parts, and skills required.
We cannot warn you of every conceivable
hazard that can arise in performing
maintenance. Only you can decide whether or
not you should perform a given task.
Follow these guidelines when performing
maintenance.
●Stop the engine and remove the key.
●Place your vehicle on a firm, level surface
using the side stand or a maintenance stand
to provide support.
●Allow the engine, muffler, brakes, and other
high-temperature parts to cool before
servicing as you can get burned.
●Run the engine only when instructed, and
do so in a well-ventilated area.
Importance of Maintenance
Maintenance
33
Maintenance Schedule
The maintenance schedule specifies the
maintenance requirements necessary to ensure
safe, dependable performance, and proper
emission control.
Maintenance work should be performed in
accordance with Honda's standards and
specifications by properly trained and equipped
technicians. Your dealer meets all of these
requirements. All scheduled maintenance is
considered a normal owner operating cost and
will be charged to you by your dealer. Keeping
an accurate maintenance record will help
ensure your vehicle is properly maintained.
2P. 37
Make sure whoever performs the scheduled
maintenance completes the maintenance
record. Retain all service documents. If you sell
your vehicle, these service documents should
be transferred with the vehicle to the new
owner.
Honda recommends that your dealer should
road test your vehicle after each periodic
maintenance is carried out.
Maintenance
34
Frequency
Items
Odometer Reading*1
× 1,000 mi 0.6 4 8 12 16 20 24 Refer to
page
× 1,000 km 1.0 6.4 12.8 19.2 25.6 32.0 38.4
Emission-Related Items
Fuel Line –
Throttle Operation 70
Air Cleaner*2 –
Crankcase Breather*3 –
Spark Plug –
Valve Clearance –
Engine Oil Initial = 600 mi (1,000 km) or 1 month:
Regular = Every 8,000 mi (12,800 km) or 12 months: –
Engine Oil Filter –
Engine Idle Speed –
Radiator Coolant*4 56
Cooling System –
Secondary Air Supply System –
Evaporative Emission Control System*5 –
Maintenance Level Maintenance Legend
: Intermediate. We recommend service by your
dealer, unless you have the necessary tools and are
mechanically skilled.
Procedures are provided in an official Honda Service
Manual ( P. 103).2
:
:
:
Inspect (clean, adjust, lubricate, or replace, if necessary)
Replace
Clean
: Technical. In the interest of safety, have your vehicle
serviced by your dealer.
Maintenance Schedule
Maintenance
35
Continued
Frequency
Items
Odometer Reading*1
× 1,000 mi 0.6 4 8 12 16 20 24 Refer to
page
× 1,000 km 1.0 6.4 12.8 19.2 25.6 32.0 38.4
Non-Emission-Related Items
Final Drive Oil 58
Brake Fluid*4 59
Brake Shoes/Pads Wear (VT750C) 60, 64
Brake Pad Wear (VT750CS) 60
Brake System 38
Brake Light Switch 65
Headlight Aim –
Clutch System 67
Side Stand 66
Suspension 71
Nuts, Bolts, Fasteners –
Wheels/Tires 46
Steering Head Bearings –
Notes:
*1 : At higher odometer readings, repeat at the frequency interval established here.
*2 : Service more frequently when riding in unusually wet or dusty areas.
*3 : Service more frequently if the vehicle is ridden often at full throttle or in the rain.
*4 : Replace every 2 years, or at indicated odometer intervals, whichever comes first. Replacement requires mechanical skill.
*5 : 50 STATE (meets California requirements).
Maintenance Schedule
Maintenance
36
Maintenance Record
Distance Odometer Date Performed By: Notes
600 miles (1,000 km)
4,000 miles (6,400 km)
8,000 miles (12,800 km)
12,000 miles (19,200 km)
16,000 miles (25,600 km)
20,000 miles (32,000 km)
24,000 miles (38,400 km)
28,000 miles (44,800 km)
32,000 miles (51,200 km)
36,000 miles (57,600 km)
40,000 miles (64,000 km)
44,000 miles (70,400 km)
48,000 miles (76,800 km)
52,000 miles (83,200 km)
56,000 miles (89,600 km)
60,000 miles (96,000 km)
64,000 miles (102,400 km)
68,000 miles (108,800 km)
Maintenance
37
Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your vehicle:
●Tire tread wear and air pressures are within
limits P. 462
●Lights, horn, and turn signals operate
normally
Check the following items if you are carrying a
passenger or cargo:
●Combined weight is within load limits
2P. 110
●Cargo is secured properly
●Suspension is adjusted to suit load P. 712
Check the following items after you get on your
vehicle:
●Throttle action moves smoothly without
binding P. 702
●Brake lever and pedal operate normally
●Refuel when needed 2 2P. 13, P. 28
●Engine stop switch functions properly
2P. 22
Check the following items at regular intervals:
●Oil level is between the upper and lower
level marks P. 542
●Brake fluid level is
Front: above the LOWER level mark P. 592
VT750CS
Rear: between the UPPER and LOWER level
marks P. 592
●Engine coolant level is between the UPPER
and LOWER level marks P. 562
●Side stand functions properly P. 662
Maintenance
38
Tires and wheels Check the air pressure ( P. 46), examine tread for wear and damage2
( P. 46), and check the wheels for damage.2
Fluid levels Check the engine oil level ( P. 54), engine coolant level ( P. 56),2 2
brake fluid level ( P. 59) and final drive oil level ( P. 58).2 2
Lights Check that the headlight, brake light, taillight, turn signals and license
plate light are working properly.
Controls Check the freeplay of the clutch lever ( P. 68), throttle grip ( P. 70),2 2
and rear brake pedal ( P. 61).2
Fuses Check that you have a full supply of spare fuses.
Nuts & bolts Check the major nuts and bolts, and tighten as needed.
Periodic Checks
You should also perform other periodic
maintenance checks at least once a month
regardless of how often you ride, or more often
if you ride frequently.
Also, check the odometer reading against the
Maintenance Schedule and perform all
maintenance that is due. P. 342
Maintenance Fundamentals
Maintenance
39
Produkt Specifikationer
| Mærke: | Honda |
| Kategori: | Motor |
| Model: | Shadow Aero (2023) |
Har du brug for hjælp?
Hvis du har brug for hjælp til Honda Shadow Aero (2023) stil et spørgsmål nedenfor, og andre brugere vil svare dig
Motor Honda Manualer
8 Januar 2025
8 Januar 2025
2 Januar 2025
31 December 2025
31 December 2025
31 December 2025
14 December 2024
13 Oktober 2024
3 Oktober 2024
3 Oktober 2024
Motor Manualer
- Motor BMW
- Motor Juki
- Motor Husqvarna
- Motor Aprilia
- Motor Mercedes-Benz
- Motor Triumph
- Motor Mitsubishi
- Motor Yamaha
- Motor Kettler
- Motor Texas
- Motor Reebok
- Motor Suzuki
- Motor Emco
- Motor Piaggio
- Motor KTM
- Motor Danfoss
- Motor Kawasaki
- Motor ELAC
- Motor Ducati
- Motor Bajaj
- Motor GasGas
- Motor Indian
- Motor Hero
- Motor BodyCraft
- Motor Cagiva
- Motor Beta
- Motor Joy-It
- Motor Hyosung
- Motor Mash
- Motor Benelli
- Motor Victory
- Motor Sherco
- Motor Harley Davidson
- Motor Moto Guzzi
- Motor Derbi
- Motor SMC
- Motor Ridley
- Motor Royal Enfield
- Motor Zero
- Motor MV Agusta
- Motor Mahindra
- Motor CRRCpro
Nyeste Motor Manualer
15 Januar 2025
10 Januar 2025
31 December 2025
30 December 2025
30 December 2025
30 December 2025
29 December 2024
4 December 2024
15 Oktober 2024
15 Oktober 2024