Honeywell Dolphin 99EXni Manual

Honeywell Stregkodelæser Dolphin 99EXni

Læs nedenfor 📖 manual på dansk for Honeywell Dolphin 99EXni (198 sider) i kategorien Stregkodelæser. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/198
Dolphin 99EX
Mobile Computers for Use in Hazardous Locations
Dolphin 99EXLG
X-XXXXXXX
I
Dolphin 99EXLW
X-XXXXXXX
I
Dolphin 99EXL0
X-XXXXXXX
I
with Windows
®
Embedded Handheld
6.5
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the reader should in all cases consult HII
to determine whether any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated into another language without the
prior written consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Dolphin is a trademark or registered trademark of Hand Held Products, Inc. in the United States and/or
other countries.
Microsoft, Windows, Windows Mobile, Windows Phone, Windows Embedded Handheld, Windows CE,
Windows 98 Second Edition, Windows NT, Windows 2000, Windows ME, Windows XP, Windows 7,
Windows Vista, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell.
TORX is a trademark or registered trademark of Textron Inc.
MicroSD and microSDHC are trademarks or registered trademarks of SD-3C, LLC in the United States
and/or other countries.
Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.
Patents
For patent information, please refer to www.hsmpats.com.
©2012-2014 Honeywell International Inc. All rights reserved.
iv
Resetting the Terminal ...................................................................................................... 2-13
Soft Reset (Warm Boot)............................................................................................... 2-13
Hard Reset (Cold Boot) ............................................................................................... 2-13
Factory Reset .............................................................................................................. 2-13
Suspend Mode .................................................................................................................. 2-13
Chapter 3 - Hardware Overview
Standard Configurations for the 99EX Models Intended for Use in Potentially Explosive Atmo-
spheres ............................................................................................................................. 3-1
Peripherals for the 99EX .....................................................................................................3-3
Accessories for the 99EX .................................................................................................... 3-4
Front Panel: 99EX ............................................................................................................... 3-5
Front Panel Features for the 99EX ................................................................................ 3-5
Back Panel: 99EX................................................................................................................ 3-7
Back Panel Features for the 99EX ................................................................................ 3-7
Side Panels: 99EX............................................................................................................... 3-9
Left Side ........................................................................................................................ 3-9
Right Side ..................................................................................................................... 3-9
Bottom Panel: 99EX .......................................................................................................... 3-10
I/O Connector .................................................................................................................... 3-10
Using the Touch Panel ...................................................................................................... 3-11
Installing a Screen Protector........................................................................................ 3-11
Batteries ............................................................................................................................ 3-11
Main Battery Pack........................................................................................................ 3-11
Internal Backup Battery ............................................................................................... 3-14
Managing Battery Power ............................................................................................. 3-15
Checking Battery Power .............................................................................................. 3-16
System Resets .................................................................................................................. 3-16
Installing a Memory Card................................................................................................... 3-17
Installing a SIM Card ......................................................................................................... 3-17
Chapter 4 - Using the Scan Image Engine
Overview.............................................................................................................................. 4-1
Laser Safety ........................................................................................................................ 4-1
N5603 Beam Divergence Angle .................................................................................... 4-1
LED Safety .......................................................................................................................... 4-1
Image Engine Specifications ............................................................................................... 4-1
Depth of Field ................................................................................................................ 4-2
Supported Bar Code Symbologies ..................................................................................... 4-3
Decoding ............................................................................................................................. 4-4
To Decode a Bar Code .................................................................................................. 4-4
Aiming Options .............................................................................................................. 4-4
Capturing Images ................................................................................................................ 4-6
Taking an Image ............................................................................................................ 4-6
Uploading Images..........................................................................................................4-7
v
Chapter 5 - Using the Color Camera
Overview.............................................................................................................................. 5-1
Taking a picture using the Camera Demo tool .................................................................... 5-1
Taking a picture using the Windows Embedded Handheld 6.5 Camera tool ...................... 5-2
Recording Video .................................................................................................................. 5-3
Chapter 6 - Using the Keyboards
Available Keyboards............................................................................................................ 6-1
Keyboard Combinations ................................................................................................ 6-1
Common Buttons........................................................................................................... 6-1
Using the Function Keys...................................................................................................... 6-2
Using the Modifier Keys ...................................................................................................... 6-3
Using the Navigation Keys .................................................................................................. 6-3
34-Key Alpha/Numeric Keyboard ........................................................................................ 6-5
ALPHA Key.................................................................................................................... 6-5
34-Key Alpha/Numeric Keyboard Combinations ........................................................... 6-6
34-Key Numeric (Calculator) Keyboard............................................................................... 6-8
ALPHA Key.................................................................................................................... 6-8
34-Key Numeric (Calculator) Keyboard Combinations.................................................. 6-9
43-Key Alpha/Numeric Keyboard ...................................................................................... 6-11
Number Lock (NUM) Key............................................................................................. 6-11
43-Key Keyboard Combinations.................................................................................. 6-12
55-Key Full Alpha/Numeric Keyboard ...............................................................................6-14
55-Key Keyboard Combinations.................................................................................. 6-14
Chapter 7 - System Settings
Overview.............................................................................................................................. 7-1
Clock & Alarms .................................................................................................................... 7-2
Personal Menu .................................................................................................................... 7-3
Buttons........................................................................................................................... 7-3
System Menu....................................................................................................................... 7-7
About ............................................................................................................................. 7-8
Backlight ........................................................................................................................ 7-9
Battery ......................................................................................................................... 7-10
Certificates................................................................................................................... 7-10
Customer Feedback .................................................................................................... 7-10
Encryption.................................................................................................................... 7-11
Error Reporting ............................................................................................................ 7-11
External GPS............................................................................................................... 7-11
Five Volt Control .......................................................................................................... 7-12
Smart Sensor............................................................................................................... 7-12
Managed Programs ..................................................................................................... 7-14
Memory........................................................................................................................ 7-15
RIL ............................................................................................................................... 7-16
Power........................................................................................................................... 7-16
Regional Settings......................................................................................................... 7-16
Remove Programs....................................................................................................... 7-17
vi
Screen ............................................................................................................................... 7-18
Task Manager.................................................................................................................... 7-19
Chapter 8 - Communication
Connections Menu............................................................................................................... 8-1
Using the IrDA Port.............................................................................................................. 8-2
IrDA Port Location ......................................................................................................... 8-2
Sending Data................................................................................................................. 8-2
Receiving Data .............................................................................................................. 8-3
Connections Manager ......................................................................................................... 8-4
To Access the Connections Manager............................................................................ 8-4
Tasks ............................................................................................................................. 8-4
Advanced....................................................................................................................... 8-5
Dolphin Wireless Manager ..................................................................................................8-6
Dolphin Wireless Manager Window............................................................................... 8-6
Enabling the Radios....................................................................................................... 8-6
Accessing Radio Configuration Utilities......................................................................... 8-7
Network Cards..................................................................................................................... 8-8
Connecting and Synchronizing the Terminal and Workstation............................................8-8
Installing Additional Software ............................................................................................ 8-10
Adding Programs Using ActiveSync or Windows Mobile Device Center..................... 8-11
Connecting the Terminal to a Wireless Network.......................................................... 8-12
Adding Programs Using the Internet............................................................................ 8-12
Software Upgrades............................................................................................................ 8-12
99EX COM Port Assignment Table ................................................................................... 8-13
Chapter 9 - Working with Wireless Wide Area Networking (WWAN)
Overview.............................................................................................................................. 9-1
Penta Band Antenna...................................................................................................... 9-1
SIM Card Installation ........................................................................................................... 9-3
Installing a SIM Card ........................................................................................................... 9-4
Enabling the WWAN Radio ................................................................................................. 9-5
GSM/HSPA+ Global Radio Dolphin Models........................................................................ 9-5
Voice Communication.................................................................................................... 9-5
Audio Modes.................................................................................................................. 9-5
Volume Control.............................................................................................................. 9-6
Accessing the Dialer Window ........................................................................................ 9-6
Dialing............................................................................................................................ 9-6
Sending Calls................................................................................................................. 9-7
Ending Calls................................................................................................................... 9-7
Accessing Voice Mail..................................................................................................... 9-7
View Options.................................................................................................................. 9-7
Setup Options...................................................................................................................... 9-7
Data Communication (GSM/HSPA+ Global Radio Dolphin Models)................................... 9-9
System Requirements ................................................................................................... 9-9
Information Requirements ............................................................................................. 9-9
Establishing Data Communication................................................................................. 9-9
Manual Network Selection........................................................................................... 9-11
vii
Data Communication GSM/CDMA Dolphin Models .......................................................... 9-13
Gobi Manager .............................................................................................................. 9-13
Establishing Data Communication............................................................................... 9-14
Chapter 10 - Working with the Bluetooth Radio
Enabling the Bluetooth Radio ............................................................................................ 10-1
Pairing and Trusted Devices ............................................................................................. 10-2
Connecting to Other Bluetooth Devices ............................................................................ 10-2
Transferring Files............................................................................................................... 10-5
Making the Terminal Discoverable .................................................................................... 10-6
Selecting COM Ports ......................................................................................................... 10-6
Chapter 11 - Working with GPS
Overview............................................................................................................................ 11-1
Assisted GPS Support....................................................................................................... 11-1
Powering the GPS Module ................................................................................................ 11-1
Communication Ports ........................................................................................................ 11-1
Selecting the Port ........................................................................................................ 11-1
COM7 .......................................................................................................................... 11-1
GPS Intermediate Driver.............................................................................................. 11-2
GPS Demo ........................................................................................................................ 11-2
Chapter 12 - Dolphin 99EX HomeBase Device (Model 99EX-HB)
Overview............................................................................................................................ 12-1
Unpacking the HomeBase ........................................................................................... 12-1
Parts and Functions........................................................................................................... 12-2
Bottom Panel ............................................................................................................... 12-5
Power ................................................................................................................................ 12-5
Connecting Power to the HomeBase........................................................................... 12-5
Charging the Main Battery................................................................................................. 12-6
To Power a Terminal and Charge its Main Battery...................................................... 12-6
Charging a Spare Battery in the Auxiliary Battery Well ............................................... 12-6
Communication.................................................................................................................. 12-7
Connecting the Communication Cables ...................................................................... 12-7
Establishing Communication ....................................................................................... 12-7
Communicating with the Dolphin Terminal .................................................................. 12-7
Verifying Data Transfer................................................................................................ 12-8
RS232 Communications Cables........................................................................................ 12-8
RS232 Pin Configuration ............................................................................................. 12-8
Serial Connector................................................................................................................ 12-9
Mounting the HomeBase................................................................................................... 12-9
Desk Mounting............................................................................................................. 12-9
Chapter 13 - Dolphin 99EX eBase Device (Model 99EX-EHB)
Overview............................................................................................................................ 13-1
Unpacking the eBase................................................................................................... 13-1
viii
Parts and Functions........................................................................................................... 13-2
Front Panel .................................................................................................................. 13-2
Back Panel .................................................................................................................. 13-4
Bottom Panel ............................................................................................................... 13-5
Power ................................................................................................................................ 13-5
Connecting Power to the eBase .................................................................................. 13-5
Charging the Main Battery................................................................................................. 13-6
To Power a Terminal and Charge its Main Battery...................................................... 13-6
Charging a Spare Battery in the Auxiliary Battery Well ............................................... 13-6
Communication.................................................................................................................. 13-7
Software Requirements ............................................................................................... 13-7
Establishing Ethernet Communication......................................................................... 13-7
Establishing USB Communication...............................................................................13-8
Mounting the eBase........................................................................................................... 13-8
Desk Mounting............................................................................................................. 13-8
Chapter 14 - Dolphin 99EX Mobile Base Device (Model 99EX-MB)
Overview............................................................................................................................ 14-1
Front Panel........................................................................................................................ 14-2
Bottom Panel..................................................................................................................... 14-3
Back Panel and Mounting Brackets................................................................................... 14-4
Mounting............................................................................................................................ 14-5
Safety Precautions....................................................................................................... 14-5
Installation.................................................................................................................... 14-5
Powering the Dolphin Terminal ......................................................................................... 14-6
Charging the Dolphin Terminal.......................................................................................... 14-6
Establishing Communication ............................................................................................. 14-6
Connecting the Communication Cables ...................................................................... 14-6
Establishing ActiveSync or Windows Mobile Device Center Communication ............. 14-7
RS232 Communication Cables ......................................................................................... 14-7
Serial Connector .......................................................................................................... 14-8
Chapter 15 - Dolphin 99EX ChargeBase Device (Model 99EX-CB)
Overview............................................................................................................................ 15-1
Unpacking the ChargeBase......................................................................................... 15-1
Parts and Functions........................................................................................................... 15-2
Front Panel .................................................................................................................. 15-2
Back Panel................................................................................................................... 15-3
Power ................................................................................................................................ 15-3
Connecting Power to the ChargeBase ............................................................................. 15-3
Charging the Main Battery................................................................................................. 15-4
To Power a Terminal and Charge its Main Battery...................................................... 15-4
Mounting the ChargeBase................................................................................................. 15-4
Channel Bracket Installation (Pre-existing Hardware Installations)................................... 15-8
Removing Power to the ChargeBase .............................................................................. 15-11
ix
Chapter 16 - Dolphin 99EX Net Base Device (Model 99EX-NB)
Overview............................................................................................................................ 16-1
Parts and Functions........................................................................................................... 16-2
Front Panel .................................................................................................................. 16-2
Back Panel .................................................................................................................. 16-3
Bottom Panel ............................................................................................................... 16-4
Power ................................................................................................................................ 16-4
Connecting Power to the Net Base.............................................................................. 16-5
Charging the Main Battery................................................................................................. 16-5
To Power a Terminal and Charge its Main Battery...................................................... 16-5
Communication.................................................................................................................. 16-6
Software Requirements ............................................................................................... 16-6
Connecting the Dolphin Terminal to the Net Base ............................................................ 16-6
Mounting the Net Base ...................................................................................................... 16-7
Channel Bracket Installation (Pre-existing Hardware Installations)................................. 16-11
Removing Power to the Net Base ................................................................................... 16-13
Chapter 17 - Dolphin 99EX QuadCharger Device (Model 99EX-QC)
Overview............................................................................................................................ 17-1
Unpacking the QuadCharger............................................................................................. 17-1
Parts and Functions........................................................................................................... 17-2
Supplying Power................................................................................................................ 17-3
Inserting and Charging Batteries ....................................................................................... 17-3
Mounting the QuadCharger ............................................................................................... 17-4
Troubleshooting................................................................................................................. 17-5
Chapter 18 - Customer Support
Product Service and Repair............................................................................................... 18-1
Technical Assistance......................................................................................................... 18-1
Limited Warranty ............................................................................................................... 18-1
How to Extend Your Warranty ..................................................................................... 18-2
1 - 1
1
Dolphin 99EX Terminal Agency Information
Dolphin 99EX mobile computers intended for use in potentially explosive atmospheres meet or exceed
the requirements of all applicable standards organizations for safe operation. However, as with any
electrical equipment, the best way to ensure safe operation is to operate them according to the agency
guidelines that follow. Read these guidelines carefully before using your Dolphin terminal.
This documentation is only relevant for Dolphin models intended for use in potentially explosive
atmospheres (99EXXXX-XXXXXXXI Models).
CAUTION - Read the Guidelines for Battery Pack Use and Disposal on page 3-14 and all cautionary markings
on the battery, charging peripheral, or device using the battery before attempting to install, use, or charge the
battery. Risk of fire and burns if improperly handled. Do not open, crush, heat above 60°C (140°F), or
incinerate.
Laser Safety
Label Locations
Model Number, Serial Number and IMEI Labels
The model (item) number, serial number, and international mobile equipment identity (IMEI) number for
the terminal are located on labels affixed to the bottom of the battery well.
Laser Safety Label
If the following label is attached to your product, it indicates the product contains an engine with a laser
aimer:
!
Compliance
Label
Dolphin 99EX with WWAN
Compliance
Label
Dolphin 99EX with WLAN
Compliance
Label
Compliance
Label
Image Engines with Integrated Laser Aimers
1 - 2
Laser Safety Statement
This device has been tested in accordance with and complies with IEC60825-1(Ed. 2.0), EN60825-
1:2007. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT,
1.0 mW MAX OUTPUT: 650nm, pulse duration of 15.5msec.
WARNING - Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
LED Safety
LED Safety Statement
LEDs have been tested and classified as “EXEMPT RISK GROUP” to the Standard: IEC 62471:2006.
Infrared LED Safety Statement
Caution! Do not view directly with optical instruments.
UL and C-UL Statement
UL and C-UL listed: UL60950-1 2nd Edition and CSA C22.2 No. 60950-1-07 2nd Edition.
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the global positioning
system (GPS) hardware, GPS operating software or other GPS-related aspects of this product. UL has
only tested for the explosion, fire, shock, and casualty hazards required by the applicable hazardous
locations standards. UL certification does not cover the performance or reliability of the GPS hardware,
GPS operating software, or other GPS-related aspects of this product. UL makes no representations,
warranties, or certifications whatsoever regarding the performance or reliability of any GPS-related
functions of this product.
Equipment Intended for Use in Potentially Explosive Atmospheres
The following information is relevant for Dolphin 99EX Mobile Computers intended for use in potentially
explosive atmospheres (Models 99EXXXX-XXXXXXXI). The model (item) number for the terminal is
located on a label affixed to the bottom of the battery well.
Note: Equipment intended for use in potentially explosive atmospheres is identifiable by specific labeling located on
the back panel of the device. See on page Label Locations 1-1.
USA/Canada
This equipment is suitable for use in the following hazardous locations, or unclassified locations, or non-
hazardous locations only.
Class I, Division 2, Groups A, B, C, D, (Class I Div 2 US and Canada)
Class II, Division 2, Groups F, G (Class II Div 2 US and Canada)
Temperature Code T6
Ambient Temperature Range: -20° to 50°C
USA: ANSI/ISA 12.12.01: 2011
!
1 - 3
Canada: CSA C22.2 No 213-M1987 (R2008), CSA C22.2 No 25-1966 (R2004)
IP67
International IEC
IEC 60079-0:2011, IEC 60079-11:2011
Europe
EN 60079-0:2012, EN 60079-11:2012
ATEX Directive
This product conforms with the requirement of ATEX directive. The ATEX Directive 94/9/EC is a
European CE Mark directive concerning products that are designed for use in potentially explosive
environments.
II 3 G D
Ex ic IIC T6 Gc
Ex ic IIIB T88°C Dc
Tamb -20° to 50°C
Where . . . indicates . . .
Tamb Ambient Temperature
II Equipment Group II
3 G ATEX Category Gas Zone: Equipment Suitable for Zone 2
3 D ATEX Category Dust Zone: Equipment Suitable for Zone 22
Ex Explosion Protection
ic Intrinsic Safety Type of Gas Protection
IIC Hydrogen/Acetylene Gas Group
T6 85°C Maximum Surface Temperature in Gas Locations
Gc Equipment Suitable for Gas Zone 2
ic Intrinsic Safety Type of Dust Protection
IIIB Non-Conductive Dust Group
T88°C 88°C Maximum Surface Temperature in Dust Locations
Dc Equipment Suitable for Dust Zone 22
1 - 4
Approvals by Country
For a complete listing of all compliance approvals and certifications, please visit
www.honeywellaidc.com/compliance.
R&TTE Compliance Statement—802.11a/b/g/n, Bluetooth, and/or GSM
The CE marking indicates compliance with the following directives:
•1995/5/EC R&TTE
• 2011/65/EU RoHS (Recast)
In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the
recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low
Voltage Directive.
The equipment is intended for use throughout the European Community; PAN European Frequency
Range: 2.402–2.480 GHz. Restrictions for use in France are as follows:
Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz
Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 MGHz band.
5Ghz band: UNII (Unlicensed National Information Infrastructure) or band1 (5.150 to 5.250 GHz) is
restricted to indoor use only. Any other use will make the operation of the device illegal.
European Contact:
Hand Held Products Europe B.V.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
FCC Requirements
Dolphin RF Terminal—802.11a/b/g/n, Bluetooth, and/or GSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1 - 6
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone
is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: HD599EXLG and HD599EXLW.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for
use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from
the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you
do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a
minimum of 1.5 cm from your body when the phone is switched on.
Honeywell Scanning & Mobility Product Environmental Information
Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information.
Hearing Aid Compatibility (HAC)
The Dolphin 99EXLW has been tested for hearing aid compatibility. This device has an M3 and T3 rating.
For additional HAC information, including the HAC rating for this product, please refer to
www.honeywellaidc.com.
When some wireless devices are used near some hearing devices such as hearing aids and implants,
users may detect a buzzing or humming noise. Some hearing devices are more immune than others to
this interference noise. Wireless devices may also vary in the amount of interference they generate.
The ratings for compatibility of digital wireless devices with hearing aids are described in the American
National Standards Institute (ANSI) C63.19 standard:
M-Rating: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference
with hearing devices than phones that are not labeled. M4 is the superior/higher of the two ratings.
T-Rating: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with hearing
devices' telecoil than unrated phones. T4 is the superior/higher of the two ratings.
The more immune the hearing aid device is, the less likely one is to experience interference noise from
the wireless phone. Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the
phone would determine probable usability:
Any combined rating equal to or greater than six offers the best use.
Any combined rating equal to five is considered normal use.
The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable to interference, you may not be able to use this
device successfully. Trying out this device with your hearing device is the best way to evaluate it for your
personal needs.
This device has been tested and rated for use with hearing aids for some of the wireless technologies
that it utilizes. However, there may be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to try the different features of this phone
thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear
any interfering noise. Consult your service provider or the manufacturer of this phone for information on
hearing aid compatibility.
1 - 7
Pacemakers, Hearing Aids and Other Electrically Powered Devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires
devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to
1000MHz. The maximum allowable field strength emitted by the Dolphin terminal is 0.3V/m according to
Subpart B of Part 1 of the FCC rules. Therefore, the RF from the Dolphin terminal has no effect on
medical devices that meet the IEC specification.
Microwaves
The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven.
Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance
degradation in your wireless network. However, both your microwave and your wireless network will
continue to function.
China RoHs
有毒害物质或元素的名称及含量 (Names and Content of Hazardous Substances or Elements)
部件名 (Parts Name) 有毒有害物质或元素
(Toxic and Hazardous Substances or Elements)
铅 汞 镉(Pb) (Hg) (Cd) 六价铬 (Cr6+)多溴联(PBB) 多溴二苯醚 (PBDE)
成像式条码阅读器 (Imager) x o o o o o
印刷电路板 (PCB) x o o o o o
外壳 (
(
(
((Housing) o o o o o o
连线 (
(
(
((Cables) x o o o o o
液晶显示器 (
(
(
((LCD) x o o o o o
电池 (
(
(
((Battery) o o o o o o
机座 (
(
(
((Mainframe) o o o o o o
键盘 (
(
(
((Keypad) o o o o o o
o: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下 (Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in China’s SJ/T11363-2006.)
x: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求 (Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials for this part is above the limit requirement in China’s SJ/T11363-2006. )
1 - 8
2 - 4
Step 2. Charge the Main and Backup Batteries
The power supply for Dolphin terminals consists of two types of battery power: the main battery pack
that is accessible from the back panel, and the backup battery that resides inside the terminal.
The main battery powers the terminal. The internal backup battery charges off the main battery and
maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main bat-
tery pack is completely discharged or removed.
Before Initial Use
Terminals are shipped with both batteries discharged of all power. The initial charging time for the main
battery pack is 6 hours for the extended 3.7V battery. Connect the terminal to one of the 99EX series
charging peripherals to charge; see Peripherals for the 99EX on page 3-3. Honeywell recommends
charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup bat-
tery is fully charged.
All Dolphin 99EX model terminals are designed for use with the following 99EX charging devices and
cables: 99EX-HB, 99EX-EHB, 99EX-NB, 99EX-CB, 99EX-DEX, 99EX-RS232, 99EX-USB, and 99EX-
USBH. See Chapters 12-17 for additional information on the individual device requirements.
Warning! Dolphin 99EX charging peripherals are not designed for use in hazardous locations. Before you
attempt to use, charge, or change the battery in the terminal carefully read all the information under Equipment
Intended for Use in Potentially Explosive Atmospheres, starting on page 2-1 and the Guidelines for Battery
Pack Use and Disposal on page 3-13.
Note: The communications/charging circuits connected to the equipment provide the transient protection set at a
level not exceeding 140% of the peak rated voltage value of the IO terminal.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
!
!
!
2 - 6
Step 4. Set the Time Zone, Time, and Date
On the Home screen, tap the line that displays the time and date. When the Clock & Alarms screen
appears, tap the arrow to the right of the time zone to open the drop down menu. Select the appropriate
time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save.
Replacing the Main Battery Pack
Before you attempt to use, charge, or change the battery in the terminal carefully read all the information under
Equipment Intended for Use in Potentially Explosive Atmospheres, starting on page 2-1 and the Guidelines
for Battery Pack Use and Disposal on page 3-13.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
Note: Replace only with battery pack model 99EX-BTSC (PN 99EX-BTSC-2) or 99EX-BTEC (PN 99EX-BTEC-2)
manufactured for Honeywell International Inc.
To replace the main battery pack:
1. Press the Power key to put the terminal in Suspend Mode (see page 2-13).
2. Release the hook securing the hand strap to the back panel of the terminal near the speaker.
3. Remove the battery door by lifting up the latches near the base of the battery door.
4. Wait at least 3 seconds, and then remove the battery. This process allows the device to shut down
properly and maintains memory during the battery swap.
5. Insert the new battery into the battery well.
6. Replace the battery door. Apply pressure to engage the door latch. The battery door must be
installed prior to powering the unit.
7. Reattach the hand strap.
We recommend use of Honeywell Li-poly or Li-Ion battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
Battery Error Notification
See Battery Error Notification on page 2-3.
!
!
!
2 - 9
No active network connection
GPRS available
GPRS connecting
GPRS in use
HSDPA available
HSDPA connecting
HSDPA in use
EDGE available
EDGE connecting
EDGE in use
UMTS available
UMTS connecting
UMTS in use
Radio is off
The radio is not connected to a network.
The radio is connected. The bars indicate the signal strength.
No radio signal
The terminal is searching for a signal.
Wi-Fi is on, but device is not connected
Wi-Fi data call
Pending alarm
Bluetooth
Icons in the Title Bar
Indicator Meaning
2 - 14
3 - 3
Peripherals for the 99EX
Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal.
Dolphin 99EX peripherals are not designed for use in hazardous locations.
Dolphin HomeBase
Device
The Dolphin HomeBase device is a charging and communication cradle supporting both RS232 and
USB communications, which enables the terminal to interface with the majority of PC-based enterprise
systems. The USB host port is Hi-Speed 2.0v compliant. This device also contains an auxiliary battery
well that charges a spare Honeywell extended Li-ion battery.
For more information, see Dolphin 99EX HomeBase Device (Model 99EX-HB) on page 12-1.
Dolphin Mobile Base Device
The Dolphin Mobile Base device is a charging and communication cradle designed specifically for in-
premise and in-transit data collection applications. It features a flexible mounting bracket and a cigarette
lighter adapter to adapt it to your environment.
The serial connector supports RS232 communication and power out to peripheral devices, such as
handheld scanners. The USB port is client Hi-Speed 2.0v compliant. You can connect the base to a
peripheral device, such as a memory stick or to a printer using a standard USB cable.
For more information, see Dolphin 99EX Mobile Base Device (Model 99EX-MB) on page 14-1.
Dolphin eBase
Device
The Dolphin Ethernet (eBase) device enables a single 99EX mobile computer to communicate with a
host device over an Ethernet network. In addition, the ebase is equipped with a USB host port that is Hi-
Speed 2.0v compliant, which enables the terminal to interface with the majority of PC-based enterprise
systems. This device also contains an auxiliary battery well that charges a spare Honeywell extended Li-
ion battery.
For more information, see Dolphin 99EX eBase Device (Model 99EX-EHB) on page 13-1.
Dolphin Net Base
Device
The Dolphin Net Base device enables up to four 99EX mobile computers to communicate with a host
device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for
connection to an additional device such as a printer, workstation, eBase, or another Net Base.
For more information, see Dolphin 99EX Net Base Device (Model 99EX-NB) on page 16-1.
Dolphin ChargeBase
The Dolphin ChargeBase is a 4-slot charging cradle that holds, powers, and charges terminals.
For more information, see Dolphin 99EX ChargeBase Device (Model 99EX-CB) on page 15-1.
Dolphin QuadCharger
Device
The Dolphin QuadCharger device is a 4-slot charging station for standard extended battery packs. For
more information, see on page Dolphin 99EX QuadCharger Device (Model 99EX-QC) 17-1.
!
3 - 5
Front Panel: 99EX
Note: Your Dolphin model may differ from the model illustrated; however, the features noted are standard for all
99EX models unless otherwise indicated.
Note: The illustrations above show the 55-Key Full Alpha/Numeric Keyboard option. For a complete overview of the
optional keyboards available for the 99EX, see Using the Keyboards on page 6-1.
For a description of each callout, see Front Panel Features for the 99EX on page 3-5.
Front Panel Features for the 99EX
Blue Modifier Key
See .Using the Modifier Keys on page 6-3
Power Key
Touch Panel Display
Navigation Keys
SCAN Key
Recessed Keyboard
Front Speaker
I/O Connector
General Notification LED
Blue Modifier Key Red Modifier Key
Microphone
Charge Indicator LED
Note: Dolphin 99EX Models intended for use in
potentially explosive atmospheres include an
I/O Cover (not shown). See page 2-2 for
additional information.
3 - 7
The touch panel can be activated by the stylus (included with the terminal) or a finger. For more
information, see Using the Touch Panel on page 3-11.
Back Panel: 99EX
Note: Your Dolphin model may differ from the model illustrated; however, the features noted are standard for all
99EX models unless otherwise indicated.
For a description of each callout, see Back Panel Features for the 99EX on page 3-7.
Back Panel Features for the 99EX
Battery Door
The battery door secures the main battery pack in the terminal’s battery well. For information
on how to remove the battery, see Replacing the Main Battery Pack on page 2-6.
Color Camera
The 3.1-Megapixels Resolution color camera provides easy picture capture with Automated
Camera Control (ACC). Additional features include automated picture profiles and an
Application Programming Interface (API).
Image/Scan Engine Window
Rear Speaker
IrDA Port
Battery Door
Fastener for the
Stylus Tether
Flashlight/
Camera Flash
Color Camera
Hand Strap
Stylus Slot
Battery Door Release
Flashlight/
Camera Flash
Fastener for the
Stylus Tether
Hand Strap Hook
3 - 15
The internal backup battery must be fully charged before using the terminal for the first time. Honeywell
recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal
backup battery is fully charged. After that, if the internal backup battery becomes fully discharged of
power, it requires a minimum of 24 hours of charging time to function normally.
Guidelines for Use
Follow these guidelines to maximize the life of the internal backup battery:
Keep a charged battery pack in the terminal; the backup battery prematurely discharges if there is not
at least a partially charged battery in the terminal.
Keep the terminal connected to power when the terminal is not in use.
Managing Battery Power
Letting the backup battery become fully discharged causes the terminal to lose all data in RAM. Honey-
well recommends, you keep a charged battery pack in the terminal at all times to help prevent data loss.
The internal battery discharges prematurely if there is not at least a partially charged battery in the termi-
nal. When you remove a battery pack, insert another charged battery pack in the terminal immediately.
Default Critical and Low Battery Points
When the terminal is running on battery power (as opposed to external power), warnings are displayed
when the battery reaches critical and low battery points. The warning points are determined by the fol-
lowing registry entry:
[HKEY_LOCAL_MACHINE\ControlPanel\Power]
There are two DWORD values in this registry entry: MedState and LowState.
The default values for these entries are as follows:
MedState=25%
This sets the Low Battery point to 25%. When the battery hits the percentage charge specified
here, the user is notified.
LowState=10%
This sets the Critical Battery point to 10%. When the battery hits the percentage charge
specified here, the user is notified.
Note: Warnings do not appear when the terminal is on external power.
Setting Critical and Low Battery Points
Developers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly
always warn). You can review and set these battery points in the RegEdit Power Tool.
1. Tap > Power Tools > RegEdit.
2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power.
3 - 16
3. Tap the Value Name to change the Value Data.
You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn).
4. Tap OK to save changes.
For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guide avail-
able for download at www.honeywellaidc.com.
Checking Battery Power
1. Tap > Settings > System
2. Tap Power to view the power status of the main battery and backup battery or tap Battery to view
detailed information on the installed battery pack.
Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level
of charge remaining on the backup battery. An installed and functional battery registers 100%. A total
discharge or a battery error registers 0%.
For additional information on Advanced Power Settings, see page 7-16.
For additional information on the Battery Log Configuration, see page 7-10.
System Resets
See Resetting the Terminal on page 2-13.
Hardware Maintenance
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free
cloth. The terminal can be cleaned with a damp cloth.
4 - 1
4
Using the Scan Image Engine
Overview
The Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes
and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The
image engine can also capture black and white digital images, such as signatures and pictures of dam-
aged inventory.
With the latest CMOS-based technology, the engine works like a digital camera and enables black and
white digital image capture, signature capture, and reading of OCR characters.
Angled Imaging
All imagers are installed at a 25 degree downward-facing angle for enhanced comfort and maneuverabil-
ity while scanning.
Laser Safety
See .Laser Safety on page 1-1
N5603 Beam Divergence Angle
LED Safety
See .LED Safety on page 1-2
Image Engine Specifications
Engines Horizontal Beam Divergence Angle
(degrees)
Vertical Beam Divergence Angle
(degrees)
N5603SR/HD 18.1 14.3
N5603ER 13.1 9.9
Engines 1D 2D Image Capture Aiming Pattern Omni-Directional Aiming
N5603SR/ER/HD Y Y Y N5603 Red High-Vis
Aiming Pattern (page 4-5)
See Laser Safety on
page 1-1.
Y
N5600SR/ER/HD Y Y Y N5600 Green Aiming
Beam (page 4-5)
Y


Produkt Specifikationer

Mærke: Honeywell
Kategori: Stregkodelæser
Model: Dolphin 99EXni
Kode for international beskyttelse (IP): IP67
Bredde: 69 mm
Dybde: 39 mm
Højde: 215 mm
Vægt: 581 g
Produktfarve: Black, Yellow
Batterispænding: 3.7 V
Batterikapacitet: 5000 mAh
Skærm diagonal: 3.7 "
Skærmopløsning: 480 x 640 pixel
Berøringsskærm: Ja
Ekstern skærm: Ingen
Kompatible hukommelseskort: MicroSD (TransFlash)
Wi-Fi: Ja
Datanetværk: EDGE, EVDO, GPRS, GSM, HSPA+, UMTS
Bluetooth: Ja
Batteriteknologi: Lithium-Ion (Li-Ion)
Opbevaringstemperatur (T-T): -25 - 70 °C
Relativ luftfugtighed ved drift (H-H): 0 - 95 %
Antal USB 2.0-porte: 1
Udgange til hovedtelefoner: 1
Wi-Fi-standarder: 802.11a, 802.11b, 802.11g
Driftstemperatur (T-T): -20 - 50 °C
Sikkerhedsalgoritmer: 802.1x RADIUS, CCX v4, EAP-TLS, EAP-TTLS, MSCHAPv2, PEAP, WAPI, WPA, WPA2
Intern hukommelse: 0.512 GB
Operativsystem installeret: Windows Embedded Handheld 6.5
Bluetooth-version: 2.1+EDR
Certificering: UL Listing (United States and Canada):\nClass I, Division 2, Groups A, B, C, D\nClass II, Division 2, Groups F, G\nATEX: Ex II 3 G D Ex ic llC T6 Gc Ex ic IIIB T88°C Dc (ATEX Zone 2)
Harmoniseret systemkode (HS): 84713000
Indbygget kamera: Ja
Batterilevetid (maks.): 15.5 t
GPS (satellit): Ja
Processorfrekvens: 1 GHz
Processorserie: OMAP 3715
Flash-hukommelse: 1 GB
Indbygget mikrofon: Ja
Processorproducent: Texas Instruments
Bagerste kamera opløsning (numerisk): 3.1 MP
Maksimal størrelse på hukommelseskort: 32 GB
Berøringsskærmstype: Modstandsdygtig
Infrarød dataport: Ja
Højttalere: Ja
Indbygget flash: Ja
Indbygget processer: Ja
Telefonfunktion: Ingen
Tastaturopsætning: Alfanumerisk
RS-232 indgangsporte: 1
Understøtter lineær (1D) stregkoder: Code 11, Code 128, Code 32, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, MSI, Plessey, Telepen, U.P.C.
Understøtter matrix (2D) stregkoder: Aztec Code, Codablock, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, MaxiCode, PDF417, QR Code
RFID-læser: Ingen
Stregkodelæser: Ja
Stødsikker: Ja
Understøttede GSM-bånd: 800,850,1800,1900 MHz

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell Dolphin 99EXni stil et spørgsmål nedenfor, og andre brugere vil svare dig




Stregkodelæser Honeywell Manualer

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

Cognex

Cognex DataMan 50 Manual

26 Februar 2025
Unitech

Unitech MS852N Manual

23 Februar 2025
Unitech

Unitech MS926 Manual

23 Februar 2025
Unitech

Unitech MS242 Manual

23 Februar 2025
Unitech

Unitech MS588 Manual

23 Februar 2025
Unitech

Unitech MS851 Manual

23 Februar 2025
Unitech

Unitech MS840P Manual

21 Februar 2025
Unitech

Unitech MS838B Manual

20 Februar 2025
Unitech

Unitech MS339 Manual

20 Februar 2025
Unitech

Unitech MS842DPM Manual

20 Februar 2025