Honeywell HBD7S Manual


Læs nedenfor 📖 manual på dansk for Honeywell HBD7S (2 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 44 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
HBD7S(X) Bullet Camera Quick Installation Guide
Document 800-15430 Rev A 07/2013
Introduction
Thank you for purchasing a Honeywell HBD7S(X) bullet camera. Follow the instructions in this guide to
install your camera. To configure the camera settings, refer to the HBD7S(X) Bullet Camera Configuration
Guide.
Important Safety Instructions
Read and keep these instructions.
Please ensure that your installation area can safely support the weight of the camera.
Do not aim the camera toward an extreme light source to prevent damage to the CCD.
Do not touch the camera lens or bezel (front glass plate).
Do not drop the camera or subject it to physical shock.
Do not use a strong or abrasive detergent when cleaning the camera.
Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments (where the
operating temperature is outside the recommended range of 14°F to 122°F [–10°C to 50°C]).
Dimensions
Installing the Camera
Before You Begin
Before you begin installing the camera, check that you have received all of the parts listed below.
If any parts are missing or damaged, contact your dealer immediately.
Connecting the Camera Cable
1. Connect the camera’s video output to the video input on your monitor or DVR.
2. Connect the camera’s power input to a 12 V DC or 24 V AC power supply.
WARNING
Installation and servicing should be performed only
by qualified and experienced technicians to conform to all local
codes and to maintain your warranty.
WARNING
This device is configured for 12 V DC or 24 V AC
operation. Do not connect to a higher voltage. Use only with NTRL-
approved Class 2 power supplies.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES
THAT DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
Camera (cable included)
• Manuals
Video test cable
DC power pigtail
Mounting plate
Focus and zoom adjustment tool
4 socket head cap screws
4 pan head screws
1 hex key
8.54 (217 mm)
4.84 (123 mm)
3.68 (93.5 mm)
3.27 (83 mm)
1
BNC Video Out (Yellow)
DC Power Jack (Red)


Produkt Specifikationer

Mærke: Honeywell
Kategori: Overvågningskamera
Model: HBD7S

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell HBD7S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Overvågningskamera Honeywell Manualer

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Sony

Sony SNC-DH160 Manual

16 November 2024
Bresser

Bresser DL-30MP Manual

15 November 2024
D-Link

D-Link DCS-6500LHV2 Manual

14 November 2024
D-Link

D-Link DCS-2803KT Manual

13 November 2024
D-Link

D-Link DCS-2804KT Manual

13 November 2024
D-Link

D-Link DCS-931L Manual

13 November 2024
D-Link

D-Link DCS-6100LHV2 Manual

13 November 2024
Emos

Emos H4060 Manual

13 November 2024