Honeywell HR91 Manual


Læs nedenfor 📖 manual på dansk for Honeywell HR91 (2 sider) i kategorien Termostat. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
evohome
HR91
1 2
4
567
EN
EN
DE
NL
ES
FR
IT
b
a
3
RAVL
RA
RAV
DanfossM30 x 1.5mm
2 x AA LR6
evohome evohome
HR91
11
1
1
22
22
evohome
evohome
1. Press and hold SETTINGS
for 3 seconds.
2. Press the green tick
3. Press ADD ZONE.
4. Type a name for the new zone
and press the green tick
5. Press RADIATOR VALVE.
6. If you want to control the zone
temperature with the evohome
Controller (which needs to be
located in that zone) press
YES, otherwise press NO.
7. Press the binding
button for 5 secs.
8. The LED will flash
AMBER for up to
2 mins whilst binding.
9. Successful binding is
confirmed by LED
showing permanent
GREEN for 5 secs.
10. You should receive a
SUCCESS message on the
evohome Controller (if not
go back and re-bind).
11. Either press the green tick
to add another radiator to the
zone or press the red cross
if you don’t need to add
another radiator to the zone.
You must repeat these steps
for each radiator controller.
DE
NL
ES
FR
IT
5 SEC
2 MIN
5 SEC
32325381001 B
GREEN (5 SEC)
GROEN (5 SEC)
VERTE (5 SEC)
GRÜN (5 SEK)
VERDE (5 SEG)
VERDE (5 SEC)


Produkt Specifikationer

Mærke: Honeywell
Kategori: Termostat
Model: HR91

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell HR91 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Termostat Honeywell Manualer

Termostat Manualer

Nyeste Termostat Manualer