Honeywell Performance HD41H Manual

Honeywell Overvågningskamera Performance HD41H

Læs nedenfor 📖 manual på dansk for Honeywell Performance HD41H (1 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Warnings
Installation and servicing should be performed only by qualified
and experienced personnel to conform to all local codes and to
maintain your warranty.
WARNING! This device is configured for 12 V DC operation
only, do NOT connect to higher voltage. Use only
with NRTL approved 12 V DC power supplies. To
prevent potential ground loop issues a separate
PSU should be used for each camera. A multiple
output PSU may be used if the multiple output
PSU has isolated and protected (2 A Max) outputs.
WARNING! 12 V DC models require the use of CSA Certified
/UL Listed Class 2 power adapters to ensure
compliance with electrical safety standards.
FCC Compliance Statement
Information to the User: This equipment has been tested and
found to comply with the limits for a Class A digital device.
Pursuant to Part 15 of the FCC Rules, these limits are designed
to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residen-
tial area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
WARNING: This is a Class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
Caution Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Manufacturer's Declaration of Conformance
The manufacturer declares that the equipment supplied with this
guide is compliant with the essential requirements of the EMC
Directive 2004/108/EC and the General Product Safety Directive
(GPSD) 2001/95/EC, conforming to the requirements of standards
EN 55022 for emissions, EN 50130-4 for immunity, EN 60065
for Electrical Equipment Safety, and EN 50581 for RoHS.
1
2
No.
Video Output
Power Input
Function
Terminal Color
Remarks
Yellow
Red
1.0 Vp-p
12 V DC
(±20%)
• The wire is polarized.
• Use 12 V DC power source.
SPECIFICATIONS
CONNECTIONPACKAGE INCLUDES / INSTALLATION
Image Sensor
Effective Pixels Array
Video Output
Sync. System
Lens
S/N Ratio
Horizontal Resolution
Min. Illumination
White Balance
AGC
Day & Night
Input / Output Connector
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
Dome Size (Ø)
Weight
F1.4, 30 IRE, AGC Max
HD41H / HD41HX HD51H / HD51HX HD50H / HD50HX
3.94" (100 mm)
Approx. 1.922 lb (0.872 kg)
3.6 mm (Fixed)
3.35" (85 mm)
Approx. 0.893 lb (0.405 kg)
1/3 inch HPI Sensor (High Pixels Image Sensor)
960 (H) x 480 (V)
CVBS: 1.0 Vp-p (75 Ohms, composite)
Internal Sync
2.8 ~ 12 mm (Varifocal)
46.4 dB Min. (AGC off)
700 TV Lines
0.5 Lux
Auto
Auto
Color
Power (Red Jack), Video (Yellow Jack)
12 V DC (±20%)
50 mA / 0.6 W (Max.)
14˚F to 122 F (-10 C to +50 C) / Humidity: 30% ~ 80% RH ˚ ˚ ˚
-4˚F to 131 F (-20 C to +55 C) / Humidity: 20% ~ 90% RH˚ ˚ ˚
3.94" (100 mm)
Approx. 0.723 lb (0.328 kg)
IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these instructions.
• Please ensure that your installation area can safety support
three times the weight of the camera.
• Do not install the camera in extreme temperature conditions.
Only use the camera where temperatures are within the
limits shown in the specifications section of the user guide.
Be especially careful to provide ventilation when operating
under high temperatures.
• Do not aim the camera towards an extreme light source to
prevent damaging the image sensor.
• This camera—HD41H(X)—is rated for indoor operation;
do not expose this camera to rain or moisture.
• Do not drop the camera or subject it to physical shock.
• Do not use a strong or abrasive detergent when cleaning
the camera.
P/N:3810-0362C
Video Output
GND
1
2
Stick the guide pattern
on the wall or ceiling.
1
Drill four holes according
to the guide pattern then
insert anchors into the
drilled holes.
2
Route and connect the
corresponding power /
video cables.
3
Attach the camera base
to the ceiling or wall using
the four supplied screws.
4
Adjust desired focus and
scene by turning and
moving the 3-axis camera
bracket by hand.
5
Align dome cover over
base and snap into place
to lock.
6
Stick the guide pattern
on the wall or ceiling.
1
Drill four holes according
to the guide pattern then
insert anchors into the
drilled holes.
2
Route and connect the
corresponding power /
video cables.
3
Attach the camera base
to the ceiling or wall using
the four supplied screws.
4
Adjust desired focus and
scene by turning and
moving the 3-axis camera
bracket by hand.
5
Put the dome cover over
the base.
6
Fix the dome cover on the
base with the L-Wrench.
7
Guide
Pattern
Rubber Pad
Ceiling
Mounting
Screw
Dome
Cover
L-Wrench
Dome
Base
Ceiling
Guide
Pattern
Dome
Cover
L-Wrench
Rubber Pad
Dome
Base
Inner Dome
Surface
Mount Screw
Ceiling
Guide
Pattern
Dome
Cover
Mounting
Screw
Dome
Base
Inner Dome
Mounting Screws
Plastic Anchors
Operation
Manual
Guide Pattern
L-Wrench
HD51H(X)HD50H(X)
Operation
Manual
Guide Pattern
HD41H(X)
Mounting Screws
Plastic Anchors
Insert coin to the side hole
and remove the dome cover
by twisting coin.
Solution
Check the power and video
connections on both camera and
monitor.
Ensure the 12 V DC power source
is properly connected (check polarity).
Ensure the scene is adequately
illuminated.
Adjust (open) the lens iris (manual
adjustment).
Adjust the focus and ensure the lens
is clean.
Malfunction
The image is dim
Poor image
No image
TROUBLESHOOTING
Resolving problems
The following table is intended to help identify the causes of
malfunctions and correct them, where possible.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil num rique de la Classe A est conforme la norme é à
NMB-003 du Canada.
Performance Series
• HD41H(X)
700 TVL, 2.8~12 mm Manual IRIS Varifocal Lens
• HD51H(X)
700 TVL, 2.8~12 mm Manual IRIS Varifocal Lens,
Vandal-Resistant Dome Housing
• HD50H(X)
700 TVL, 3.6 mm Fixed Lens, Vandal-Resistant Dome Housing
Document 800-18620 — Rev B — 07/2014
Operation Manual

Produkt Specifikationer

Mærke: Honeywell
Kategori: Overvågningskamera
Model: Performance HD41H

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell Performance HD41H stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Honeywell Manualer

Honeywell

Honeywell HS3MAG1 Manual

26 Maj 2024
Honeywell

Honeywell HBD3PR2 Manual

13 April 2024
Honeywell

Honeywell HCD484E Manual

21 Marts 2024
Honeywell

Honeywell HBD95S Manual

9 Marts 2024
Honeywell

Honeywell Enterprise HERC96T24S Manual

17 Februar 2024
Honeywell

Honeywell Lyric C2 Manual

11 Januar 2024
Honeywell

Honeywell Performance H4W2PER3 Manual

8 Januar 2024
Honeywell

Honeywell HB75H Manual

2 December 2023
Honeywell

Honeywell RCHSKF1/U Manual

19 November 2023
Honeywell

Honeywell HCM384L Manual

16 November 2023

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Profile

Profile PAC-106 Classic Manual

27 Juni 2024
Profile

Profile PAC-206 Classic Manual

27 Juni 2024
Profile

Profile PAC-108 Luxe Manual

27 Juni 2024
Profile

Profile PAC-118 Touch Manual

27 Juni 2024
Profile

Profile PSE-135 Manual

27 Juni 2024
Profile

Profile PSE-515 Manual

27 Juni 2024
Profile

Profile PSE-507 Manual

27 Juni 2024
Profile

Profile PSE-514 Manual

27 Juni 2024
Profile

Profile PSE-710 Manual

27 Juni 2024
Inovonics

Inovonics EN7017 Manual

25 Juni 2024