Honeywell T8095A Manual


Læs nedenfor 📖 manual på dansk for Honeywell T8095A (28 sider) i kategorien Termostat. Denne guide var nyttig for 41 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/28
D.F. Rev. 10-94 ©Honeywell Inc. 1994 Form Number 69-0639—1
T8095A/191108AJ; TS8095A/191108AC; T8095A/Q682
Heating-only Thermostat and Wallplate or
Heating/Cooling Thermostat and Subbase
OWNERS MANUAL
M3375
M3375
Recycling Notice
This control contains mercury in a sealed tube.
Do
not
place control in the trash at the end of its
useful life.
If this control is replacing a control that contains
mercury in a sealed tube, do
not
place your old
control in the trash.
Contact your local waste management authority
for instructions regarding recycling and the
proper disposal of this control, or of an old control
containing mercury in a sealed tube.
If you have questions, call Honeywell Inc. at
1-800-468-1502.
Welcome to the world of energy savings with
your new Honeywell thermostat. The Honeywell
name is your assurance of accurate control and
reliable operation for years to come.
Your new thermostat will automatically lower and
raise the temperature in your home one or more
times every 24 hours. This allows you to signifi-
cantly lower your fuel costs, while awakening (or
returning home) to a comfortable temperature.
Read this manual to learn how to use your new
thermostat.
2
Table of Contents
Page
Features of Your Thermostat ............................................................................................................. 4
Setting the Temperature ..................................................................................................................... 7
Setting Subbase Switches ................................................................................................................. 8
Inserting Clock Batteries .................................................................................................................... 9
Setting the Clock ...............................................................................................................................10
Programming .................................................................................................................................... 11
Troubleshooting ................................................................................................................................15
Servicing the Thermostat ..................................................................................................................23
Cycle Rate Adjustment .................................................................................................................23
Thermometer Adjustment .............................................................................................................24
Warranty ...........................................................................................................................................27
3 69-0639—1
Features of Your
Thermostat
2 THERMOSTAT COVER. Lift up and
remove to adjust heat anticipator.
3 THERMOMETER. Provides accurate room
temperature reading.
4 PROGRAM INDICATOR. Blue indicates low
temperature is in effect; red indicates high
temperature is in effect.
5 CLOCK. Provides a 24-hour slotted dial to
hold the programming pins.
6 CLOCK HANDS. Turn minute hand
clockwise to match the correct AM or
PM time to the time indicator.
7 TIME INDICATOR. Arrow head (triangle
shape) indicates blue (low) temperature
setting or red (high) temperature setting in
control on program index wheel. Also
indicates time on 24-hour dial.
8 PROGRAM INDEX WHEEL. Controls high
and low temperature at specific time of day
as set by program pins.
1 FLIP-UP COVER. Lift up to set clock for
energy savings and normal temperature
periods.
4
2
1
3
M7318
4
9 TEMPERATURE SETTING LEVERS. Left
(blue mark) controls low temperature and
right (red mark) controls the high temperature.
10 PROGRAM PINS. Insert into 24-hour clock
dial slots to control program index wheel.
11 PIN SLOTS. Located on 24-hour dial at
10-minute intervals for program pin insertion.
12 PROGRAM DIAL. 24-hour dial with light
band to indicate daytime and dark band to
indicate nighttime.
13 MANUAL PROGRAM ADVANCE BUTTON.
Allows change from comfort to energy
savings setting and vice versa without
changing the program.
14 HEAT ANTICIPATOR SCALEPLATE.
Calibrated to match the heating system
current draw in amperes.
15 ANTICIPATOR SETTING LEVER. Adjust to
match the heating system primary control
current.
16 MERCURY BULB AND BIMETAL ELE-
MENT (2). Provide automatic temperature
control by switching the heating or cooling
system on or off.
6 9
10 12 8 713 14 15
11 16
M7316
5
5 69-0639—1
17 191108 WALLPLATE. Provides mounting
base and wiring connections for heating-
only or cooling-only thermostat.
18 Q682 SUBBASE (not included with
thermostat; ordered separately). Provides
mounting base, wiring connections and
manual switching control for heating/cooling
thermostat. See Setting Subbase Switches
section for additional information.
17
AUTO OFF COOL
HEATON
FAN
B
O
W
Y
R
G
M1809
18
6
Setting the Temperature (Fig. 1)
For Heating:
Set the left lever (blue mark) to the energy
savings temperature you want when you are
sleeping or your home is unoccupied.
Set the right lever (red mark) to the tempera-
ture you want for normal comfort periods.
NOTE: You may override the time program by
setting both the red and blue levers to the
same temperature setpoint.
For Cooling:
Set the left lever (blue mark) to the tempera-
ture you want for normal comfort periods.
Set the right lever (red mark) to the energy
savings temperature you want when you are
sleeping or your home is unoccupied.
8
9
10
12
1
1
1
2
3
4
5
6
7
8
9
10
12
1
1
1
2
3
4
5
6
7
50 60 70 80
12
6
39
50 60 70 80
HIGH
TEMPERATURE
SETTING
LEVER
(RED MARK)
LOW TEMPERATURE
SETTING LEVER
(BLUE MARK)
M1520
Fig. 1Setting high and low temperature levers.
7 69-0639—1
Setting Subbase Switches (If Applicable)
The subbase system switch controls system
operation as follows:
HEAT—Heating system is controlled by the
thermostat. Cooling system is off.
COOL—Cooling sytem is controlled by the
thermostat. Heating system is off.
OFF—Both the heating and cooling sytems are
off. If the fan switch is in the AUTO position,
the fan is also off.
AUTO—In cooling only application, only cooling
operates. In heating only applications, only
heating operates.
The subbase fan switch controls fan operation
as follows:
ON—Fan operates continuously.
AUTO—Fan operates with cooling equipment as
controlled by the thermostat or with heating
equipment as controlled by the plenum fan
switch. In electric heat, heat pump and fan coil
systems, the fan is controlled by the thermo-
stat in heating and cooling.
To switch positions, use thumb or index finger
to slide lever to desired position. Switch lever
must stop in detent over desired function
indicator mark for proper circuit operation.
8


Produkt Specifikationer

Mærke: Honeywell
Kategori: Termostat
Model: T8095A

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell T8095A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Termostat Honeywell Manualer

Termostat Manualer

Nyeste Termostat Manualer