Hooker 5820-85003-84 Manual

Hooker Tabel 5820-85003-84

Læs nedenfor 📖 manual på dansk for Hooker 5820-85003-84 (1 sider) i kategorien Tabel. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ASSEMBLY INSTRUCTION
ITEM# 5 -85003- Curved Console Table 820 84
**
Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people
Assembly steps:
1. Put console top upside down on a soft surface to prevent it from being scratched.
2. Follow numbers on legs and corners blocks. Attach legs (H) to console top by using bolts
(F lock washers (B), flat washers (C),and tighten all with allen wrench (D) in clockwise ),
direction (See diagram 1).
3. Well attach center shelf (J) to legs (H) to make sure all pre-drilled holes are in alignment , use
bolts (E lock washers (B flat washers (C) and tighten all with allen wrench (D) in clockwise ), ),
direction (See diagram 1).
4. Then place bottom frame (K) onto legs (H) to make sure all pre-drilled holes are in alignment ,
use bolts (A lock washers (B flat washers (C) tighten all with allen wrench (D) in ), ), and
clockwise direction (See diagram 1).
4. Turn console table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 1


Produkt Specifikationer

Mærke: Hooker
Kategori: Tabel
Model: 5820-85003-84

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5820-85003-84 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Tabel Hooker Manualer

Tabel Manualer

Nyeste Tabel Manualer