HP 1910-8G Manual

HP Ikke kategoriseret 1910-8G

Læs nedenfor 📖 manual på dansk for HP 1910-8G (33 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 109 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/33

Models

HP 1910-48G Switch

JE009A

HP 1910-24G-PoE (365 W) Switch

JE007A

HP 1910-24G-PoE (170 W) Switch

JE008A

HP 1910-24G Switch

JE006A

HP 1910-16G Switch

JE005A

HP 1910-8G Switch

JG348A

HP 1910-8G-PoE+ (65W) Switch

JG349A

HP 1910-8G-PoE+ (180W) Switch

JG350A

Key features

Customized operation using intuitive Web interface

Layer 3 static routing with 32 routes

Access control lists

Spanning Tree: STP, RSTP, and MSTP

Lifetime warranty

Product overview

HP 1910 switches are advanced smart managed fixed-configuration Gigabit Ethernet lite Layer 3 switches designed for small

businesses looking for key enhanced features in an easy-to-administer solution. The series has eight models: 8-, 16-, 24-, and 48-port

10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. All switches have additional true Gigabit

SFP ports for fiber connectivity. HP 1910 models support rack mounting or desktop operation and use variable-speed fans for quiet

operation. The HP 1910 switches operate at full wire-speed IPv6, supporting QoS traffic prioritization and security features such as

802.1X network login, access control lists, and denial-of-service prevention. Customizable features include VLANs and link aggregation

trunking, as well as advanced features such as Layer 3 static routing and Spanning Tree Protocols (STP, RSTP, and MSTP). The HP 1910

switches come with a lifetime warranty covering the unit, fans, and power supplies.

Features and benefits

Quality of Service

(QoS)

Broadcast control

: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic

Rate limiting

: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums

Traffic prioritization

: provides time-sensitive packets with priority based on DSCP or IEEE 802.1p classification; packets are

mapped to four hardware queues for more effective throughput

Management

Simple Web management

: intuitive Web GUI (http/https) allows for easy management of device by even nontechnical users

Single IP management

: enables management of up to 32 HP 1910 devices using a single Web interface; simplifies management

of multiple devices

Secure Web GUI

: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS

SNMPv1, v2c, and v3

: devices can be discovered and monitored from an SNMP management station

Complete session logging

: provides detailed information for problem identification and resolution

QuickSpecs

HP 1910 Switch Series

Overview

DA - 13677 North America — Version 7 — May 14, 2012

Page 1

Produkt Specifikationer

Mærke:	HP
Kategori:	Ikke kategoriseret
Model:	1910-8G
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	210 mm
Dybde:	210 mm
Højde:	43.6 mm
Vægt:	2000 g
Produktfarve:	Sort
Formfaktor:	1U
Strømforbrug (typisk):	14.4 W
Intern hukommelse:	128 MB
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Servicekvalitet support (QoS):	Ja
Processorfrekvens:	333 Mhz
Flashhukommelse:	128 MB
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Administreret
Switch lag:	L3
10G understøttelse:	Ingen
Spanning tree protokol:	Ja
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Port-spejlning:	Ja
Link aggregering:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	8
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
IGMP snooping:	Ja
MAC adresselabel:	8192 entries
Switch kapacitet:	18 Gbit/sek.
Gennnemløb:	13.4 Mpps
Stativ-montering:	Ja
Multicast-understøttelse:	Ja
Antal SFP modulslots:	1
Begrænsning af hastighed:	Ja
Stabelbar:	Ja
DHCP funktioner:	DHCP client
Pakke bufferlager:	0.5 MB
Latens (1 Gbps):	5 µs
Latens (10-100 Mbps):	5 µs