HP LaserJet Pro MFP M274 Manual

HP Printer LaserJet Pro MFP M274

Læs nedenfor 📖 manual på dansk for HP LaserJet Pro MFP M274 (32 sider) i kategorien Printer. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/32
1
Español. 13 ..........
Italiano 10 ...........
Deutsch 7 .............
Français 4 ............
English 1 ..............
Suomi 25 .............
Nederlands 22 ......
Dansk 19 .............
Català 16 .............
Svenska 34 ..........
Português 31 .......
Norsk 28 ..............
Windows
1. For Windows 7 or lower, do not connect the USB cable befor installing the
software. The installation process prompts to connect the cable at the
appropriate time. If the cable is already connected, restart the printer
when installation prompts to connect the cable.
2. Continue with 6. Locate or download the software installation les.”
NOTE: During software installation, select the option to Directly connect
this computer using a USB cable.
Mac
1. For Mac, connect the USB cable between the computer and the printer
before installing the software.
2. Continue with 6. Locate or download the software installation les.”
Manually congure the IP address
For information on how to manually congure the IP address, see the printer
User Guide www.hp.com/support/colorljM274MFP.
Wired (Ethernet) network connection
Use a standard network cable.
1. Connect the network cable to the printer and to the network. Wait a few
minutes for the printer to acquire a network address.
2. On the printer control panel, touch the Network button. If an IP address
is listed, the network connection has been established. If not, wait a few
more minutes and try again. Note the IP address for use during software
installation. Example IP address: 192.168.0.1
To manually congure the IP address, see “Manually congure the
IPaddress.
3. Continue with 6. Locate or download the software installation les.”
NOTE: During software installation, select the option to Connect through
a network.
IMPORTANT:
Follow Steps 1 - 3 on
the printer hardware setup
poster, then continue
with Step 4 to the right.
www.hp.com/support/colorljM274MFP www.register.hp.com
Color LaserJet Pro
MFP M274
Getting Started Guide
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
After turning on the printer, wait for it to initialize. To navigate the touchscreen control panel,
use touch, swipe, and scroll gestures. Follow the prompts on the control panel to congure
these settings:
Language
Location
Default Settings
Under Default Settings select one of these options:
Self-managed: Optimized default settings for a guided experience on setups,
congurations, and updates.
IT-managed: Optimized default settings for eet manageability with enhanced security.
Settings are fully customizable after initial setup.
NOTE: Select Print Information Page to print a page that instructs how to change the default
settings.
NOTE: Touch the Help button on the printer control panel to access help topics.
2
4.
Initial setup on the control panel
5.
Select a connection method and prepare for software installation


Produkt Specifikationer

Mærke: HP
Kategori: Printer
Model: LaserJet Pro MFP M274

Har du brug for hjælp?

Hvis du har brug for hjælp til HP LaserJet Pro MFP M274 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Printer HP Manualer

Printer Manualer

Nyeste Printer Manualer

Evolis

Evolis KM2000B Manual

25 Februar 2025
Evolis

Evolis TATTOO2 RW Manual

25 Februar 2025
Evolis

Evolis KM500B Manual

25 Februar 2025
Evolis

Evolis KC200B Manual

25 Februar 2025
Evolis

Evolis KC Essential Manual

25 Februar 2025
Evolis

Evolis KC200 Manual

25 Februar 2025
Evolis

Evolis KC Max Manual

25 Februar 2025
Unitech

Unitech ZD621R Manual

21 Februar 2025
Canon

Canon PIXMA G3415 Manual

17 Februar 2025
Canon

Canon Pixma TS704a Manual

17 Februar 2025