HP LaserJet Pro P1100 series Manual

HP Printer LaserJet Pro P1100 series

Læs nedenfor 📖 manual på dansk for HP LaserJet Pro P1100 series (10 sider) i kategorien Printer. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/10
Dansk 13 .............
Català 11
.............
Español 9
.............
Italiano 7
.............
Deutsch 5
.............
Français 3
............
English 1
..............
Norsk 25
..............
Lietuvių .......... 23
Latviešu 21
..........
Suomi 19 .............
Eesti ............... 17
Nederlands 15
......
Svenska 29 ..........
Português 27 .......
5. Select a connection method and prepare for software installation
Windows
1. For Windows 7 or lower, do not connect the USB cable before installing
the software. The installation process prompts to connect the cable at
the appropriate time. If the cable is already connected, restart the printer
when installation prompts to connect the cable.
2. Continue to 6. Locate or download the software installation les.”
NOTE: During software installation, select the option to Directly connect
this computer using a USB cable.
Mac
1. Connect the USB cable between the computer and the printer before
installing the software.
2. Continue to 6. Locate or download the software installation les.”
Perform a wireless installation
(P1102w wireless models only)
Before starting the installation, verify that the wireless access point is working
correctly. Make sure that the printer, router, and computer are all turned on
and that the computer is connected to the same wireless network you want to
connect the printer to.
If there is not a solid blue light on the top of the printer, go to Process A.
If there is a solid blue light on the top of the printer, go to Process B.
Process A
1. Place the CD in the CD-ROM drive, and then click Install. When the
Printer connections dialog appears, choose Congure to print over
the Wireless Network.
2. Follow the onscreen instructions.
Process B
1. Place the CD in the CD-ROM drive, and then click Install. When the
Printer connections dialog appears, choose Connect to a congured
Wireless Network printer.
2. Follow the onscreen instructions.
3. Select the printer detected by the software. If the printer cannot be
detected by the installer, manually input the printers IP address to
continue the installation.
NOTE: Print a Conguration page to nd the printer’s IP address. At
the printer control panel, press and hold the cancel button for 5
seconds, and then release the cancel button to print the Conguration
page. TheIP address is listed on the Conguration page in the Network
Information section.
Manually congure the IP address
See the printer User Guide for information on how to manually congure the IP
address www.hp.com/support/ljp1100series.
IMPORTANT:
First, follow Steps 1 - 3
on the printer hardware
setup poster, then continue
with Step 4 to the right.
www.hp.com/support/ljp1100series www.register.hp.com
LaserJet Pro P1100 series
Getting Started Guide
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
4. Initial setup at the control panel
At the printer control panel, check the LED status before beginning software installation.


Produkt Specifikationer

Mærke: HP
Kategori: Printer
Model: LaserJet Pro P1100 series

Har du brug for hjælp?

Hvis du har brug for hjælp til HP LaserJet Pro P1100 series stil et spørgsmål nedenfor, og andre brugere vil svare dig




Printer HP Manualer

HP

HP Jet Fusion 500 3D Manual

26 September 2024
HP

HP Designjet T120 Manual

20 September 2024
HP

HP Photosmart A630 Manual

17 September 2024
HP

HP Smart Tank 530 Manual

2 September 2024
HP

HP ENVY 6000 Manual

2 September 2024
HP

HP DesignJet 30 Manual

2 September 2024
HP

HP ENVY Inspire 7200e Manual

2 September 2024
HP

HP Color MFP S951 Manual

2 September 2024

Printer Manualer

Nyeste Printer Manualer