HP Pavilion dv7-2020es Manual

HP Bærbare computer Pavilion dv7-2020es

Læs nedenfor 📖 manual på dansk for HP Pavilion dv7-2020es (108 sider) i kategorien Bærbare computer. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/108

User Manual

DDR MiVue 755/765 SAFETY

Got a Question? Visit www.navman.com.au/faq for more information

Revision: R01

(06/2020)

Trademark

All brand and product names are trademarks or registered trademarks of their respective companies.

Disclaimer

Speciﬁcations and documents are subject to change without notice. Navman does not warrant this document is error-free. Navman assumes no liability

for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the documents. Visit www.navman.com.au

| www.navman.co.nz to downlaod the latest User Manual.

Note

Not all models are available in all regions.

Depending on the speciﬁc model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this

document. It is recommended that you contact a skilled installer (e.g. the service personnel of the vehicle or an authorised auto technician) for assistance

and installation.

Regulatory information

For regulatory identiﬁcation purposes, this Navman device is assigned a model number of N583. Marking labels located on the exterior of your device

indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in

this section. Some notices apply to speciﬁc models only. The user needs to switch off the device when exposed to areas with potentially explosive

atmospheres such as petrol stations, chemical storage depots and blasting operations.

WEEE

This product must not be disposed of as normal household waste, in accordance with the EU directive

for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should be disposed of

by returning it to the point of sale or to a municipal recycling collection point.

5 6 1 5 N 5 8 3 0 0 1 4 R 0 1

1. Product Overview

Note: Images may differ from the actual product.

8 9

1 Mini-USB connector

2 Mounting socket

3 LCD screen

4 System indicator

5 Microphone

6 Memory card slot

7 Shutdown button

8 Camera lens

9 Speaker

Power button ( ) / Function keys

Power button

Press and hold for 2 seconds to turn the dash cam on and off.

Function keys

The four function keys control the corresponding icons displayed on the LCD screen. Key function may vary

depending on the current screen.

Activates event recording

Enters Parking Mode (if activated)

Opens the Menu screen

(Recording screen)

Moves to the next item

Selects the current item

Moves to the previous item

Returns to the previous page

(Menu screen)

2. Using your dash cam in a vehicle

Note:

l The dash cam should be placed near the rear-view mirror to ensure the highest video quality.

l Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s

ﬁeld of vision is blocked.

l If the windscreen is tinted with a reﬂective coating, it may be athermic and impact GPS reception. In this instance,

please mount the device in a “clear area".

l The system will automatically calibrate the G sensor during start-up. If the device's viewing angle or installation

position was changed from the original position after start-up, please turn the device off and on again to

recalibrate the G sensor. Otherwise the G sensor may malfunction and impact other features of the device (such

as event-driven recording and Parking Mode).

l The dash cam is designed to stay connected with the vehicle power adapter to ensure optimal performance. The

internal battery is designed as a backup power source for short-term use only. It allows the dash cam to save the

last recording in case the vehicle's power system fails during an incident. The internal battery is not to be used as

the primary power source for prolonged periods.

Make sure the vehicle is parked on level ground and follow the instructions below to mount your dash cam.

1. Cleaning the windscreen with rubbing alcohol before attaching the suction cup mount to the windscreen is highly

recommended.

2. When adjusting the dash cam's viewing angle, make

sure the camera’s view is parallel with the level ground

and the ground to sky ratio is close to 6 to 4.

3. Connect the vehicle power adapter to the cigarette

lighter. Route the cable through the ceiling and the

A-pillar so that it does not interfere with driving. Make

sure the cable installation does not interfere with the

vehicle's airbags or other safety features.

Note: The installation illustrations are for reference

only. The placement of the device and cables may

vary depending on the vehicll. If you encounter

any problems during installation, contact a service

technician for assistance.

Adds a Safety Camera (selected models only)

3. Using a memory card

A memory card (not included) must be installed before videos can be recorded.

The dash cam supports Class 10 memory cards with 8 GB – 128 GB capacity.

Hold the card by the edges and gently insert it into the slot as shown in the

illustration. To remove a card, gently push the top edge of the card inwards to

release it and pull it out of the slot.

Formatting a card

To format the memory card (all data will be erased), press > .Format

Note:

l DO NOT apply pressure to the centre of the memory card.

l Navman does not guarantee the product’s compatibility with memory cards from all manufacturers. Check

product speciﬁcations/warranty to ensure the memory card can be used in dash cameras and loop recording

devices. For more information on memory cards, please visit www.navman.com.au/memory-card

l Please format the memory card to avoid recording errors caused by missing system ﬁles or folders.

l You may need to format your memory card periodically to ensure it remains in good working condition.

l You are advised to turn the device off before removing the memory card.

4. Turning the dash cam on/off

The dash cam turns on automatically once vehicle engine is started. The System indicator glows in green when the dash

cam is powered.

Shutting down the dash cam

Occasionally you may need to perform a hardware reset when the dash cam stops responding or if it appears to be

“frozen” or unresponsive. To shut down the dash cam, press and hold the Power button ( ) until the system powers

off.

If the system does not turn off by keeping the Power button pressed, you can force it

to shut down by inserting a pin or paper clip) into the Shutdown button.

5. System icons

The status bar on the top of the screen contains various system icons to provide status information about your device.

Icons displayed may vary depending on your device model and its current state.

1 Recording indicator

2 Current time

3 Microphone status

4 GPS signal status

5 Current GPS car speed

1 2 4

6. Setting the date and time

The system date and time must be correct in order for the videos to display accurate timestamps. You can access the

Date/Time settings by:

1. Press > .System > Date/Time

2. Select one of the following methods to change the date and time:

l Select the appropriate and settings for your location.Use GPS time: Time Zone Daylight Saving Time

l Manual: Press / to adjust the highlighted value and press to navigate to the next ﬁeld. Press

to save the settings.

7. Recording videos while driving

Continuous recording

Continuous recording will automatically commence shortly after the system is powered up, and the system indicator

will ﬂash while recording is in progress.

Videos taken during continuous recording are divided into multiple clips and saved under the "Normal" folder,

but recording will not stop between video clips. Once the folder has reached its allocated capacity, the system will

automatically record over the oldest video saved under this folder.

Recording can be paused by pressing . Press to return to the recording screen and resume recording.

Event-driven recording

Note: The device will automatically calibrate its G sensor during start-up. If the device's viewing angle or mounting

location was changed from the original position after start-up, the G sensor must be recalibrated by restarting the

device to avoid malfunction and impact the Event-Driven recording feature.

During continuous recording, if a sudden event has been detected, such as running over a road bump, vehicle collision,

high-speed driving, or making a sharp turn, the G sensor will prompt the dash cam to record the event. The sensitivity

level of the G sensor can be adjusted by going to .> Video Recording > G-Sensor Sensitivity

The event recording saves the duration from 3 seconds before the event until 17 seconds after the event. The event

recording can last up to 1 minute if the sensor is triggered again during the recording. Event-driven recordings are

saved in the "Event" folder. Once the folder has reached its allocated capacity, the system will automatically record over

the oldest video saved under this folder.

Press to manually activate event-driven recording while continuous recording is in progress. Press the button again

to stop event-driven recording and resume continuous recording.

8. Recording videos while parked

Note:

l The dash cam cannot operate in Parking Mode by relying on its internal battery power. An additional accessory such

as an uninterruptible power cable or the Smart Box is required. Please visit www.navman.com.au www.navman. or

co.nz for purchasing information.

l The device will automatically calibrate its G sensor during start-up. If the device's viewing angle or mounting location

was changed from the original position after start-up, the G sensor must be recalibrated by restarting the device to

avoid malfunction and impact the Parking Mode feature.

Parking Mode is disabled by default. Before enabling Parking Mode, please check your device memory storage allocation.

Go to to set a proper allocation for parking recording. Changing memory > System > Storage Allocation

allocation will erase the contents on the memory card, so save any videos or photos to your computer ﬁrst.

You can enable the function by selecting . (The icon will appear on the > Parking Mode > Detection > On

screen.) When movements or vibrations are detected during Parking Mode, the system will save the duration from 3

seconds before the event until 17 seconds after the event. The saved recording can last up to 1 minute if the sensor

is triggered again during the recording. Parking Mode recordings are saved in the "Parking" folder. Once the folder has

reached its allocated capacity, the system will automatically record over the oldest video saved under this folder.

Note:

l You can press to manually enter the Parking mode while continuous recording is in progress.

l Parking Mode recording is triggered by the G sensor and motion detection. You can change the sensitivity level by

selecting > > > Parking mode Motion Detection G-Sensor Sensitivity.

To exit Parking Mode (and resume continuous recording), press . You will be prompted to play the saved parking

recording (if available).

9. Camera mode

The dash cam can also be used as a camera to take photographs. Access Camera Mode by going to > Camera

and pressing to capture a still image. Photos captured by the dash cam are stored in the "Photo" folder.

10. Viewing videos and photos

To view a video or photo captured by the dash cam:

1. Press .> File Playback

2. Use / to select a folder then press to enter the highlighted folder.

3. Use / to select the video or image then press to view the ﬁle.

4. While viewing a ﬁle, you can:

l Press / to play the previous/next video.

Press / to display the previous/next photo.

l Press to return to the list.

l Press to display a pop-up menu to perform the following actions:

l Play/Pause: Plays or pauses the current video.

l Move to Event: Moves the ﬁle to the “Event” folder.

l Transfer Video: Uploads the selected video/photo to your smartphone.

l Delete: Deletes the ﬁle.

11. Monthly safety camera alerts

Caution: The safety camera feature may not be available in all countries due to legal reasons.

Note: The safety camera feature may not be available on your device due to model variations.

The system can issue alerts if the vehicle is approaching a safety/speed camera to help drivers monitor their speed.

The driver will receive a visual alert on the screen as well as an audio warning (Beep/Voice) when there is a safety

camera ahead.

If the > setting is set to Safety Cam Alert Sound Beep:

The dash cam will beep once to alert the driver of the safety camera ahead.

If the vehicle is travelling over the speed limit while approaching a safety camera, the driver will hear continuous

beeping until the driver slows down to the proper speed.

The dash cam will beep again once the vehicle has passed the safety camera.

Adding a safety camera

Note: A custom safety camera can only be added after a GPS ﬁx is established.

Up to 100 custom safety camera locations can be added to the built-in database. To add a custom safety camera at the

vehicle's current location, press on the recording screen. After a location has been added, the dash cam will issue

alerts the next time you pass through this location.

To view detailed information on a custom safety camera, press > > Safety Cam Custom Safety Cam, use

/ to select a location, then press to view its GPS coordinates and timestamp; press to delete the record.

Updating safety camera data

Navman does not warrant that all types and locations of safety camera data are available as cameras may be removed,

relocated or new cameras installed. Your MiVue dash cam may come with monthly safety camera updates via the Navman

MiVue Pro app (for selected models only).

12. Getting connected

Navman MiVue Pro

Note:

l WIFI connectivity is not available on certain models and not all MiVue dash cam models support the Navman

MiVue Pro app or all its features.

l Navman MiVue Pro is compatible with iOS 9.0 (and above) and Android 5.0 (and above) devices. Navman does

not guarantee the product’s compatibility with smartphones from all manufacturers.

Videos recorded by the dash cam can be viewed, shared, and backed up using the Navman MiVue Pro app via WIFI.

Search for "Navman MiVue Pro" in the Apple App Store or Google Play Store to download the app for free.

Setting up a WIFI connection

Note:

l The instructions on how to operate a smartphone are for reference only. Actual settings and methods may vary

depending on the phone type/model and app version.

l The WIFI connection between your dash cam and smartphone does not provide Internet access.

On your dash cam, press > > to enable the WIFI mode. Once enabled, the WIFI setting screen displays WIFI On

the SSID and password of the dash cam.

Follow the steps to set up the WIFI connection between the dash cam and the smartphone via the MiVue Pro app.

1. Make sure that you have enabled the WIFI function on the smartphone.

2. Open the MiVue Pro app and tap the "+" icon.

3. Tap Select WIFI and then select the dash cam you want to connect to.

4. Tap Done to complete the WIFI connection.

You can check the WIFI connection status by the WIFI icon on the dash cam.

The dash cam is connected to the smartphone and paired with the MiVue Pro app.

The dash cam is not connected to the smartphone.

The dash cam is connected to the smartphone but not paired with the MiVue Pro app yet.

On your smartphone, open the MiVue Pro app and keep it awake. Any videos recorded by pressing are directly

transferred to the smartphone.

Over-the-air (OTA) updates

Occasionally, Navman may offer ﬁrmware and safety camera updates. You can update the data via OTA updates of the

Navman MiVue Pro app. When new data is available, you will be asked to update the data when you open the app. Follow

the on-screen instructions to complete the update. For more information on Navman MiVue Pro's features, refer to the

Navman MiVue Pro App Quick Start Guide.

13. The Menu screen

Press to customise system settings.

Note: Certain menu options may not be available on your device due to model variations.

File Playback

Plays the recorded videos and photos.

Camera

Activates Camera mode for capturing still images.

WIFI

Displays WIFI settings for connecting a smartphone to the dash cam (not available on certain models).

Sound Recording

Enables/disables audio recording during video capture.

Driving Safety

The dash cam provides a number of advanced driving safety functions to make your driving safer.

Calibration: You are advised to calibrate the system regularly in order to be alerted properly. Follow the steps to

calibrate the system.

1. Drive the vehicle in the middle of the lane.

2. Ask a passenger to perform system calibration by following the on-screen instructions.

Please adjust your device to

align the red line with the

horizon and the green line

with the centre of the lane.

Please align the blue line with

the hood.

LDWS: Beep VoiceSelect or to enable the Lane Departure Warning System (LDWS). The system will alert you

when it detects that the car speed is over 60 km/h and the car has strayed from its intended lane.

Headlight Reminder: Once enabled, the system will remind you to turn the lights on when driving after dark.

Driver Fatigue Alert: Once enabled, the system will remind you to take a break every two/three four/ hours

during a long drive.

Eco Drive Indicator: Once enabled, a red/yellow/green indicator is used to represent your driving efﬁciency.

FCWS: Beep VoiceSelect or to enable the Forward Collision Warning System (FCWS). The system will alert you

when the car moves slowly and gets too close to the car ahead.

FDWS: Once enabled, the system will alert you when the car ahead has proceeded to go after stopping for at least

10 seconds.

SafetyCam

Alert Sound: Selects Beep/Voice Mute or turns off ( ) audio alerts.

Alert Distance: The system will alert you at a preset distance (Short/Medium/Long) when your vehicle is

approaching a safety camera.

Alert Method:

Smart Alert: Sets the alert distance function according to the current GPS car speed.

Standard Alert: Sets the alert distance function according to the speed limit.

Threshold: Sets the speed value for the dash cam to start offering alerts

Cruise Speed Alert: Sets the cruise speed limit. Alerts are issued when you drive at a cruise speed over the set

value.

Custom SafetyCam: Lists all custom safety cameras sorted by creation timestamp.

Parking Mode

Detection: Enables/disables video capture based on a speciﬁc detection method.

Detection Method: Only G-sensor/Only Motion/BothSets the detection method to .

Note: G-sensor detection is based on movements/vibrations of the vehicle detected by the gravity sensor;

motion detection captures movements in the camera's ﬁeld of view.

Auto Entry: Sets the G-sensor's sensitivity level (Easy/Medium/Difﬁcult/Manual) for activating Parking

Mode. For example, when the option is set to , the G-sensor will have a low sensitivity level and Parking Mode is Easy

activated much easier.

Motion Detection: Sets the sensitivity level (Low/Medium/High) of motion detection that triggers video

recording during Parking Mode.

G-Sensor Sensitivity: Sets the sensitivity level (Low/Medium/High) of the G sensor for triggering video

recording during Parking Mode.

Video Recording

Video Clip Length: Sets the length (1 3/ /5 min) of video clips captured during continuous recording.

WDR: Enables/disables the Wide Dynamic Range (WDR) function to improve the dash cam's image quality under

high-contrast lighting conditions.

EV: Sets the exposure level to adjust the brightness of the image.

Frequency: 50 Sets the frequency ( /60 Hz) for the camera to avoid problems caused by artiﬁcial light sources that

are not constant.

G-Sensor Sensitivity: Sets the G-sensor's sensitivity level for triggering event-driven recording.

Stamps: Coordinates/G-SensorSpeciﬁes the information ( ) displayed on each recorded video.

Speed Stamp: Displays the driving speed on each recorded video.

Text Stamp: Displays customisable text information on each recorded video.

Produkt Specifikationer

Mærke:	HP
Kategori:	Bærbare computer
Model:	Pavilion dv7-2020es
Bredde:	412.6 mm
Dybde:	277 mm
Højde:	43.2 mm
Vægt:	3520 g
Brugervejledning:	Ja
Produktfarve:	Sort
Produkttype:	Laptop
Pakkedybde:	160 mm
Pakkebredde:	450 mm
Pakkehøjde:	345 mm
Skærm diagonal:	17.3 "
Skærmopløsning:	1600 x 900 pixel
Berøringsskærm:	Ingen
Kompatible hukommelseskort:	Memory Stick (MS), MMC, MS PRO, SD, xD
Front kamera:	Ja
Wi-Fi:	Ja
Datanetværk:	Ikke understøttet
Bluetooth:	Ingen
Batteriteknologi:	Lithium-Ion (Li-Ion)
Formfaktor:	Muslingeskal
HD-type:	HD+
Naturligt aspektforhold:	16:9
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 65 %
Antal HDMI-porte:	1
DVI-port:	Ingen
Ethernet LAN-porte (RJ-45):	1
Antal USB 2.0-porte:	3
Udgange til hovedtelefoner:	2
Ethernet LAN:	Ja
Wi-Fi-standarder:	802.11b, 802.11g
Processorkerner:	2
Driftstemperatur (T-T):	0 - 35 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Intern hukommelse:	4 GB
Indgangsspænding for vekselstrømsadapter:	100 - 240 V
Frekvens for vekselstrømsadapter:	50 - 60 Hz
Operativsystem installeret:	Windows Vista Home Premium
Fjernbetjening inkluderet:	Ja
AC-adapter inkluderet:	Ja
Indbygget kortlæser:	Ja
HDD kapacitet:	250 GB
Antal indbyggede højttalere:	2
Batterilevetid (maks.):	- t
Intel® Wireless Display (Intel® WiDi):	Ingen
Bæredygtighedscertifikater:	ENERGY STAR
Processorfrekvens:	2.2 GHz
Processorserie:	AMD Turion 64 X2 Mobile
Processortråde:	2
Processor-cache:	1 MB
Processor cache type:	L2
Intern hukommelsestype:	DDR2-SDRAM
Maksimal intern hukommelse:	8 GB
Hukommelse form faktor:	SO-DIMM
Samlet lagringskapacitet:	500 GB
Lagermedie:	HDD
On-board grafikkort, model:	Ikke tilgængelig
Diskret grafikadaptermodel:	AMD Mobility Radeon HD 4650
On-board grafikkort:	Ingen
Diskret grafikadapter:	Ja
Indbygget mikrofon:	Ja
Mikrofonindgang:	Ja
S/PDIF-udgang:	Ingen
Docking-stik:	Ja
ExpressCard-slot:	Ja
Cardbus PCMCIA slot type:	Ingen
Smartcard slot:	Ingen
Opladningsport type:	DC-in-stik
Pegeredskab:	Touchpad
Numerisk tastatur:	Ja
Tastatur i fuld størrelse:	Ja
Intel® Hyper Threading Teknologi (Intel® HT Technology):	Ingen
Intel® Turbo Boost Teknologi:	Ingen
Vekselstrømsadapter strøm:	90 W
Slot til kabellås:	Ja
Strømledning inkluderet:	Ja
Driftshøjde:	-15 - 3048 m
Ikke-drift højde:	-15 - 12192 m
Lydsystem:	3D Sound Blaster Pro
Hukommelsesstik:	2x SO-DIMM
Processorproducent:	AMD
Processormodel:	RM-74
Tilslutning af hovedtelefoner:	3,5 mm
Oprindelsesland:	Kina
Drivere inkluderet:	Ja
Antal VGA-porte (D-sub):	1
Garantibevis:	Ja
Optisk drevtype:	DVD Super Multi DL
Antal battericeller:	8
HDD-grænseflade:	SATA
Windows taster:	Ja
Tilslutning af mikrofon:	3,5 mm
Intel® klar video teknologi:	Ingen
HDD hastighed:	5400 rpm
Processor sokkel:	Sokkel S1
Intel® InTru™ 3D Teknologi:	Ingen
Intel® Clear Video HD Teknologi (Intel® CVT HD):	Ingen
Intel® Insider™:	Ingen
Intel® Smart Connect Teknologi:	Ingen
Intel® My WiFi Teknologi (Intel® MWT):	Ingen
Intel® Anti-Theft Teknologi (Intel® AT):	Ingen
Intel® Rapid Start Teknologi:	Ingen
Intel® Smart Response Teknologi:	Ingen
Intel® Identity Protection Teknologi (Intel® IPT):	Ingen
Intel® Matrix Storage Teknologi (Intel® MST):	Ingen
Intel® Active Management Teknologi (Intel® AMT):	Ingen
Intel® Quick Sync Video Teknologi:	Ingen
Intel® Clear Video Teknologi til MID (Intel® CVT for MID):	Ingen
Hukommelseslayout (slots x størrelse):	2 x 2 GB
Antal installerede HDD'er:	2
FireWire-porte (IEEE 1394):	1
Operativsystemets arkitektur:	64-bit
LightScribe:	Ja
Intel HD Audio Teknologi:	Ingen
Automatisk effektdetektering:	Ja
Modem-porte (RJ-11):	1
Maksimal intern hukommelse (64-bit):	8 GB
4G WiMAX:	Ingen
Højttalerproducent:	Altec Lansing
Antal eSATA/USB 2.0-porte:	1