Hyundai H-CMD4015 Manual
Læs nedenfor 📖 manual på dansk for Hyundai H-CMD4015 (216 sider) i kategorien Bilradio. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/216
H-CMD4015
MULTIMEDIA DVD/CD/MP3 RECEIVER WITH BUILT-IN 4.3” TFT DISPLAY AND TV TUNER
Instruction manual
DVD/CD/MP3- 4,3” TFT-
2
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully
before connecting, operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents ...............................................................................................................................................2
Important safeguards .........................................................................................................................................3
Accessories........................................................................................................................................................4
Installation.........................................................................................................................................................5
Electrical Connection.......................................................................................................................................10
Unit controls....................................................................................................................................................12
General operations...........................................................................................................................................16
Using the touch screen control.........................................................................................................................19
Radio Operations.............................................................................................................................................29
Disc operations................................................................................................................................................35
SD/MMC Memory Card/USB operations ........................................................................................................46
AV In Operations ............................................................................................................................................48
GPS Operations (Option).................................................................................................................................48
TV Operations.................................................................................................................................................49
Handling and cleaning discs ............................................................................................................................51
Troubleshooting guide.....................................................................................................................................52
Specification....................................................................................................................................................53
3
Important safeguards
Read carefully through this manual to familiarize yourself with this high-quality sound system.
The beginning of operation is the moment of the unit installation. Before use the device in winter it is
recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.
Use the unit with the temperature that goes beyond the operation temperature greatly decreases the
operation resource of the screen and other components of device and can result an outage.
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the unit.
Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or
create safety hazards such as electrical shock or laser beam exposure.
Do not use the unit in places where it can be exposed to water, moisture and dust.
Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period
or during a thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an
unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a
qualified technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please
confirm it before installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may
overload or burn out the power amplifier.
When the unit is connected to the car battery for the first time, the front panel opening mechanism is
activated. To return it to the initial position, turn off the ignition and wait.
Every time the ignition is turned on, the unit automatically switches on and gets into standby mode In cold
seasons, install the front panel only after the vehicle salon is heated.
9
2. Pull off the front panel from the main unit.
Store the front panel in the protective case provided for safe keeping.
TO ATTACH THE FRONT PANEL
First fasten the right side of the front panel onto the bracket of main unit. Then slightly push
the left side of the front panel to attach the main unit.
12
Unit controls
Front panel
1. POWER/MUTE button
2. MENU button
3. RELEASE button
4. AF/REG button
5. EJECT button
6. TA button
7. BAND button
8. DISPLAY button
9. AS/PS button
10. PTY button
11. USB jack
12. PLAY/PAUSE button
13. IR sensor
14. Touch screen
15. AV in jack
16. VOL+/VOL-, PREVIOUS/NEXT buttons
17. SOURCE button
13
Inner panel
18. Card slot for GPS map card
19. Disc slot
20. Panel status indicator
21. RESET button
22. SD/MMC memory card slot
14
Remote control (RC)
1. POWER/LIGHT button
2. MODE/SMART button
3. SETUP button
4. SUB-T button
5. ANGLE button
6. PREVIOUS/NEXT, FAST REWIND/
FAST FORWARD/Cursor buttons
7. ENTER button
8. DISPLAY button
9. ZOOM button
10. BAND button
11. Digit buttons
12. 9/PTY button
13. 7/TA button
14. 8/AF/REG button
15. RPT button
16. 0 button
17. SOURCE button
18. EJECT button
19. SYS/DVD/TV switch
20. INFO button
21. DVD MENU button
22. MUTE button
23. TITLE button
15
24. VOL+/VOL- buttons
25. AUDIO button
26. PLAY/PAUSE button
27. STEP button
28. STOP button
29. GOTO/AS/PS button
30. PROGRAM/LO/DX button
31. RDM/MO/ST button
32. A-B button
Changing the battery
1. Press the catch and at the same time pull out the battery tray (pic. 1).
2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped (+)
mark facing upward. Insert the battery tray into the RC (pic.2).
Warning:
Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor
immediately.
Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the
battery to give off heat, crack or start a fire.
When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off
heat, crack or start a fire.
Pic. 1 Pic. 2
16
General operations
Reset the Unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front
panel at first, and then press RESET button on the inner panel of the unit with a pointed object, (such as a
ballpoint pen) to set the unit to initial state.
Note: When some errors occur on the display, you can also press RESET button to resume to normal, and it
will erase some memorized functions.
Turning the Unit On/Off
Press any button (except RELEASE) on the unit to turn it on or press
POWER/LIGHT button on the RC. Press and hold POWER/LIGHT button on
RC or POWER/MUTE button on the unit to turn off the unit completely.
There is a start-up screen on the touch screen when you turn on the unit, then
switch to TUNER or DISC playing mode.
TFT ON/OFF
Press POWER/LIGHT button on the RC to turn the display on or off. This function prevents the driver from
bright light of the display when driving at night.
Volume Control
Press VOL+/VOL- button on the RC or on the unit to increase/decrease the sound level.
Mute Function
Press MUTE button on the RC or POWER/MUTE button on the unit to turn off the sound. The corresponding
icon appears on the TFT. Press it again to resume the previous volume level.
17
System (SYS) DVD/TV joyswitch
Move the switch to SYS, DVD or TV, to use the buttons on the RC served for system, DVD or TV playback.
Otherwise you will not able to use the buttons.
Source selection
Press SOURCE button on the unit to enter the source menu and
choose the source by touching the corresponding icon: USB,
DISC, TUNER, TV, SD, GPS, AV1, AV2.
Press SOURCE button on the RC to switch the sources after each
pressing.
Note: BT, IPOD, and CDC modes are not available.
Dual zone
Dual Zone function is designed to arrange tow independent multimedia zones in the vehicle salon, e.g. for the
driver and back seat passengers. It enables the driver to listen to FM broadcast while back seat passengers are
watching a DVD.
Pressing and holding SMART/MODE button on the RC, you can turn on or off the dual zone playing mode.
After turning on dual zone playing mode, press SMART/MODE button to select the playback mode for rear
zone: MEDIA => TV => AV1 => AV2.
Last Position Memory
During the media playback (DISC, USB, SD/MMC CARD), if you turn off the unit and then switch on it, the
unit will resume playing from the point that it was interrupted.
During the media playback (DISC, USB, SD/MMC CARD), if you switch to other mode, and then return the
previous mode again, the unit will resume playing from the point that it was interrupted.
18
Ejecting/Loading
Note: Before removing a disc from the disc slot, you should retract the TFT screen, otherwise, the loaded disc
cannot be removed from the disc slot when you press EJECT button.
Press EJECT button to flip down the panel, now you can load the disc.
Press EJECT button to flip down the panel. Press it one more time to eject the disc.
To adjust the angle of TFT Screen
Poke at the TFT screen to adjust the gradient of the TFT screen, so as to achieve an optimal viewing angle.
System Information Display
In media playback mode, TV or auxiliary AV1/AV2 input mode, press DISPLAY button on the RC, the TFT
screen will show such kind of system information, such as real time, volume level, current playback mode of
rear zone etc.
19
Using the touch screen control
The Touch Screen Control allows fingertip control of virtually all functions. Alternatively, you could also
operate with ease with the user-friendly integrated big function buttons that are prominently visible.
Source menu
In every playback mode, when you press SOURCE button on the panel
or click the icon on the touch screen, the Source menu will pop up.
To select a source (USB, Disc, SD, GPS, TV, AV 1, AV 2 or
Tuner), click the relevant icons on the touch screen.
Click the icon to return to previous playback and exit the
Source menu.
In the Source menu adjusting volume is not available.
To access the tools setup interface
In every playback mode, when pressing MENU button on the head
unit or click the icon on the touch screen, the tools setup interface
will pop up.
To access a menu mode (AUDIO, PICTURE, SYSTEM, DVD),
click the relevant icons on the touch screen.
Click the icon to return to previous playback and exit the Source menu.
20
Tools Setup
1. Audio Setup
In the tools setup interface mode, click the icon on touch screen,
the first audio setup interface will pop up.
You can adjust each item by pressing the icon or on the
touch screen.
- Volume: 0~63;
- Bass: -7~ 7;
- Treble: -7~7;
- Balance: L15~L-R~R15;
Click the icon to access the second audio setup interface.
You can adjust each item by pressing the icon / or / on
the touch screen.
- Fader: R15~R-F~F15;
- EQ: FLAT, CLASSIC, POP, ROCK;
- Loudness (increases the low frequency, which can improve
sensitivity for your ears): on/off;
- Sub.w: on/off.
When you click the icon to return the first audio setup interface. After finishing setting, when you click the
icon to return the upper tier tools setup interface; click the icon to exit the menu setup interface.
22
1) Clock Setup mode
Click the icon to access the clock setup interface.
You can adjust each item by pressing the icon or in the touch
screen.
Time: on/off;
In this mode, you can select clock to appear or disappear on the touch screen.
Time mode: 12/24 Hour display format;
Hour: To adjust hour;
Minute: To adjust minute.
After finishing setting, you can click the icon to return the upper tier tools setup interface; click the icon
to exit the menu setup interface.
2) Front and rear dual zone independent playing setup mode
Click the icon to access the front and rear dual zone independent
playing setup mode interface.
Click the icon or to turn on or off the front
and rear dual zone independent playing mode.
23
- When you turn on the front and rear dual zone playing mode, you can adjust each item by pressing the icon
or on the touch screen. The front zone mode will change as following: MEDIA => GPS => TV =>
AV 1 => AV2 => TUNER
The rear zone mode will change as following: MEDIA=> TV => AV 1 => AV2.
When you turn off the dual zone playing mode, the rear zone playing will turn off.
After finishing setting, you can click the icon to return to upper tier tools setup interface; click the icon
to exit the menu setup interface.
3) Other Setup
Click the icon to access the TV Mode setup mode and Navigation
Voice setup mode interface.
1. You can select the TV format by pressing the icon or
according to local area TV format.
2. You can select the navigation prompt voice of GPS on/off by pressing the icon or .
After finishing setting, you can click the icon to return to upper tier tools setup interface; click the icon
to exit the menu setup interface.
4) Touch screen Calibrate If the position of touch occurs warp, you can calibrate by pressing the “+” cursor.
Click the icon to access the touch screen calibrate mode interface.
24
Aim at the “+” and click it, the symbol will moves around the touch
screen, click it five times, system will finish calibration automatically
and exit calibration mode.
If the calibration setting has been finished, the interface will pop up or
the following window will appear.
Touch the screen once to save the setting and exit the calibration mode
or wait 30 seconds to leave old setting and to exit.
4. DVD Setup
In the tools setup interface mode, click the icon in the center of
the touch screen, the DVD system setup interface will pop up.
Note: the DVD system setup is only available in video mode.
You also can press SETUP button to perform this function, but
without touch screen buttons, only using RC cursor buttons and
ENTER button.
When the top item is blackout, you can choose the different setup pages by pressing the icon or on the
touch screen or RIGHT/LEFT cursor buttons on the RC.
25
Click the icon or press DOWN cursor button on the RC to move the cursor to the setup page below and
then you can access different setup options by using the icon or or UP/DOWN cursor buttons on the
RC.
Click the icon or press RIGHT cursor button on the RC to move to the choice list of each setup option,
and then use the icon or , or UP/DOWN cursor button on the RC to change your selection.
Click the icon or press ENTER cursor button on the RC to confirm your selection.
Press icon or UP cursor button on the RC until you reach the top and then you can select other setup
pages.
Select EXIT SETUP item to exit the menu.
When the setting is completed, click the icon to return the upper tier tools setup interface; click the
icon to exit the tools setup interface.
Note: When a setting is changed, the previous settings are overwritten. Make a note of the current settings
before making changes. If the vehicles battery is disconnected, the settings will be cleared and will return to the
factory settings.
System Setup
TV system
The item is used to select the TV output mode. This car DVD player
can play discs recorded in either PAL or NTSC formats.
NTSC: when need NTSC signal on the extra monitor.
PAL: when you need PAL signal on the extra monitor.
26
AUTO: will sense the type of monitor attached to the output and select NTSC or PAL as need. If you know the
type of monitor, you should choose the type in this menu rather than letting AUTO select do it for you.
This is because there may be a small undesirable delay and flickering of the screen during the AUTO select
process.
Screen Saver
Like a computer monitor, video screens can “burn in” if a still image is displayed too long on the screen. This
unit features a “screen saver” which produces a moving image to avoid burn-in, if SCREEN SAVER is enabled
in the Setup menu.
TV type
TV types can vary based on their aspect ratio. The common monitors fall into one of three categories: 4:3
(PS/Pan and Scan), 4:3 (LB/Letterbox) or 16:9 (Widescreen).
Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches
and undesirable display distortion or cutoffs.
4:3 PS (PAN SCAN): Select this when connected to a conventional 4:3 size monitor. The picture will fill the
entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right
sides will not be visible when playing a 16:9 format movie.
4:3 LB (LETTER BOX): When you are playing a widescreen format video on a normal (4:3) monitor, the best
way to view this is in (4:3) letterbox format. You can see the full picture, but there will be a black band at the
top and bottom of the screen.
16:9 (WIDESCREEN): Select this format when connected to a widescreen TV.
Password
The password system is used in conjunction with the Parental Controls settings to prevent a young person from
changing the settings without permission. The factory default password is “0000”. If you wish to change it,
enter “0000” and when prompted, enter a different 4-digit number.
Setting the rating level (parental control)
Use this function to restrict the viewing of movies to children of appropriate age levels.
29
Radio Operations
To switch to radio mode
Briefly press SOURCE button on the unit or press SOURCE/SRC on the
RC to select the radio mode. Or click the icon on the touch screen
to select the radio mode. The radio control interface will pop up.
To select a radio band
In radio mode, repeatedly press BAND button on the head unit or RC or click the icon on the touch screen
to select one of the following radio broadcasting bands: ->FM 1-> FM 2 ->FM3->AM 1 ->AM2.
Note: To make it possible to use RC, put the switch to SYS mode.
Manual/Auto tuning
Manual tuning mode
Pressing and holding FAST FORWARD/FAST REWIND buttons on the RC, or pressing and holding the icon
/ on the touch screen, it will change into manual tuning mode.
Then press FAST FORWARD/FAST REWIND buttons on the RC or / on the screen repeatedly to
manually search upward or downward step by step for the desired radio station within the current band.
In manual tuning, if the tuning buttons haven't been pressed within 5 seconds, it will change into automatic
search mode automatically.
30
Automatic tuning mode
Briefly press FAST FORWARD/FAST REWIND buttons on the RC or / on the touch screen, the
automatic search will start. It will search upward or downward for the strong signal radio station within the
current band. When a stable radio station signal has been captured, the automatic tuning will stop and play the
program from that radio station. If the received station is a stereo broadcasting station, the icon appears on
the touch screen.
To store/recall a preset radio stations
There are 6 numbered preset buttons, which can store and recall stations for each band. You can store up to a
total of 30 radio stations in the memory (18 FM, 12 MW (AM)).
To store a station:
Select a band (if needed)
Select a station by using FAST FORWARD/FAST REWIND buttons on the RC or / on the touch
screen.
Hold preset button (1-6) on the RC or hold preset icon (1-6) on the touch screen for at least 2 seconds to
save the current station as a preset memory station.
To recall a station:
Select a band (if needed).
Press a preset button (1-6) on the RC briefly or click preset icon (1 -6) on the touch screen to recall the
stored station. You can also recall the stored station by pressing PREVIOUS/NEXT buttons on the RC.
Auto store/Preset scan
Auto store: Pressing and holding AS/PS button on the head unit or GOTO/AS/PS button on the RC, or
pressing and holding the icon on the touch screen to start auto store. The radio will scan radio station from
31
the current frequency, and automatically store the 6 strongest stations into the preset memories. When auto
store is complete, the radio will start preset scan of the stored 6 stations.
Preset scan: Press AS/PS button on the head unit or GOTO/AS/PS button on the RC, or press the icon on
the touch screen to scan each preset station. If the field strength level is more than the threshold level, the radio
will hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are
scanned, finally the radio will play at the preset station where scanning started. Press the button again to stop
preset scan.
STEREO/MONO
FM station is received in stereo mode. However, if the signal weak or reception is not as good as you would
like, switching to MONO mode usually improves the overall sound quality.
Press RDM/MO/ST button on the RC or click the icon on the touch screen to choose FM STEREO or
MONO audio effect.
LOCAL/DX
In urban settings, most stations are strong enough and it should be set in LOCAL mode. Switch to DX (distant)
mode to search for stations with weaker signals. Press PROGRAM/LO/DX button on the RC or click the icon
on the touch screen to choose local reception or DX (distant) reception mode.
RDS (Radio Data System) Operations
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This
system can display RDS information, and can automatically switch to the broadcast station with the best
reception as you move over long distances (AF switching).
32
The RDS data are the PI, PS, TP, PTY, TA and AF data.
PI: Program Identification code. Code for identifying program
PS: Program Service Name. Broadcasting station name data expressed in alphanumerically character.
TP: Traffic Program Identification. Identification data for traffic information broadcasting station.
TA: Traffic Announcement. Identification data showing traffic information is being transmitted or not.
AF: Alternative Frequencies. Frequency list of broadcasting station transmitting the same program.
Note: When using the RDS function, always set the radio to the FM mode.
To switch to RDS operating interface
Pressing the icon on the touch screen, you can use the RDS control icons , , or on the
bottom of the touch screen as below.
Setting AF mode
Briefly press AF/REG button or click the icon on the touch screen to switch the AF mode on/off.
Whenever RDS is on, symbol “AF” appears on the touch screen.
Program name is displayed on receiving a RDS station. “AF” starts blinking if the broadcasting signals getting
worse.
There are 3 state the segment AF on the TFT display:
Segment “AF” off: AF switching mode off.
Segment “AF” on: AF switching mode on, and has RDS information.
Segment “AF” flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of
checking time of each AF depends on the signal strength of the current station, from a few minutes for a strong
station to a few seconds for a weak state.
33
Every time when new AF is stronger than the current station, it switches over to that frequency for very short
time. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of
normal program.
During FM mode, when AF is on, manual store, auto store/preset scan function can only receive and save RDS
program.
REG (Regional Program) function
Press and hold the AF/REG button, or click the icon on the touch screen to turn on/off region mode.
Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a
certain time period. When region is on, the current listening program remains unchanged. When region is off, it
allows the reception moves to the regional station.
(Traffic Announcement) function
Press button or click the icon on the touch screen to turn on/off TA search mode.
When mode is on and a traffic announcement is transmitted:
1) Switches automatically from any audio mode to the traffic announcement.
2) Switches on the traffic announcement automatically when the receiver is in waiting reception mode and the
audio signal is muted.
3) TA, TP will be displayed on LCD.
Note: When the traffic announcement is over, the initial operation mode will be restored.
TA interruption function: The current traffic announcement is cancelled by pressing TA button. But the TA
search mode will not be off.
41
ZOOM Function
Press ZOOM button repeatedly to enlarge or reduce the size of image according to the disc as follows:
=> ZOOM 2 => ZOOM 3 => ZOOM 4 => ZOOM 1/2 => ZOOM 1/3 => ZOOM 1 / 4 => ZOOM OFF.
Programmed Play Function
Press PROGRAM/LO/DX button during playback to activate the program-editing interface as follows:
For VCD/SVCD/CD:
For DVD/MP3/MPEG4:
Produkt Specifikationer
| Mærke: | Hyundai |
| Kategori: | Bilradio |
| Model: | H-CMD4015 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Hyundai H-CMD4015 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bilradio Hyundai Manualer
14 Januar 2025
8 August 2024
6 August 2024
2 August 2024
1 August 2024
1 August 2024
30 Juli 2024
29 Juli 2024
29 Juli 2024
28 Juli 2024
Bilradio Manualer
- Bilradio SilverCrest
- Bilradio Denver
- Bilradio Sencor
- Bilradio Opel
- Bilradio Sony
- Bilradio Panasonic
- Bilradio Philips
- Bilradio Lenco
- Bilradio LG
- Bilradio AEG
- Bilradio Audio-Technica
- Bilradio Mercedes-Benz
- Bilradio Pioneer
- Bilradio Hifonics
- Bilradio Kenwood
- Bilradio Daewoo
- Bilradio Technaxx
- Bilradio MB Quart
- Bilradio Smart
- Bilradio Harman Kardon
- Bilradio Becker
- Bilradio Sanyo
- Bilradio Grundig
- Bilradio Volvo
- Bilradio Pyle
- Bilradio Biltema
- Bilradio Nedis
- Bilradio Kicker
- Bilradio Auna
- Bilradio Muse
- Bilradio Skoda
- Bilradio Aiwa
- Bilradio JBL
- Bilradio AKAI
- Bilradio Pure
- Bilradio Trevi
- Bilradio Blaupunkt
- Bilradio JVC
- Bilradio Clatronic
- Bilradio Crunch
- Bilradio Medion
- Bilradio Fiat
- Bilradio Alpine
- Bilradio Maginon
- Bilradio Parrot
- Bilradio Ford
- Bilradio Telefunken
- Bilradio Jensen
- Bilradio VDO
- Bilradio Varta
- Bilradio Krüger&Matz
- Bilradio Zenec
- Bilradio MT Logic
- Bilradio Cobra
- Bilradio Xblitz
- Bilradio Telestar
- Bilradio Mini
- Bilradio Renault
- Bilradio Dual
- Bilradio Focal
- Bilradio Nextbase
- Bilradio Magnat
- Bilradio McIntosh
- Bilradio Hertz
- Bilradio Overmax
- Bilradio Scott
- Bilradio ECG
- Bilradio Renkforce
- Bilradio Navitel
- Bilradio SPC
- Bilradio Caliber
- Bilradio Lark
- Bilradio Deaf Bonce
- Bilradio Eltax
- Bilradio Orion
- Bilradio Farenheit
- Bilradio Roadstar
- Bilradio Clarion
- Bilradio Majestic
- Bilradio Audiovox
- Bilradio Rockford Fosgate
- Bilradio Boss
- Bilradio Conceptronic
- Bilradio Kunft
- Bilradio Ground Zero
- Bilradio Audison
- Bilradio Fusion
- Bilradio Boston Acoustics
- Bilradio Ultimate
- Bilradio Manta
- Bilradio Toxic
- Bilradio Orava
- Bilradio REVO
- Bilradio Xomax
- Bilradio DLS
- Bilradio Tevion
- Bilradio Stinger
- Bilradio Brigmton
- Bilradio Marquant
- Bilradio Mac Audio
- Bilradio Vieta
- Bilradio Tokai
- Bilradio Naxa
- Bilradio Autovision
- Bilradio Lanzar
- Bilradio Shuttle
- Bilradio Norauto
- Bilradio Elta
- Bilradio Axton
- Bilradio Soundstream
- Bilradio VDO Dayton
- Bilradio Macrom
- Bilradio Watssound
- Bilradio Tamashi
- Bilradio Emphaser
- Bilradio Scion
- Bilradio Sendai
- Bilradio MTX Audio
- Bilradio Phonocar
- Bilradio US Blaster
- Bilradio RTO
- Bilradio Sevic
- Bilradio Cartronix
- Bilradio Mystery
- Bilradio RetroSound
- Bilradio Spectron
- Bilradio Dension
- Bilradio Multilaser
- Bilradio ESX
- Bilradio Raveland
- Bilradio Planet Audio
- Bilradio VW
- Bilradio Rodek
- Bilradio Eclipse
- Bilradio Voxx
- Bilradio SoundMAX
- Bilradio Impulse
- Bilradio Twister
Nyeste Bilradio Manualer
19 Februar 2025
19 Februar 2025
19 Februar 2025
11 Februar 2025
1 Februar 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
28 Januar 2025
21 Januar 2025