IFM E20754 Manual


Læs nedenfor 📖 manual på dansk for IFM E20754 (1 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Anwendungshinweise für 90°-Aufschraublinsen
Operating instructions for 90° attachments
Notice de montage pour des lentilles à renvoi d'angle 90°
Sach-Nr. 701351 / 00 01/99
Die 90°-Aufschraublinse lenkt den Lichtstrahl mittels eines Umlenkprismas, welches
eine zylindrische Austrittsfläche hat, um.
Durch den seitlichen Lichtaustritt/Lichteintritt können auch schwer zugängliche
Abtastbereiche erreicht werden.
Die zylindrische Austrittsfläche wirkt wie eine Linse, so daß eine
Reichweitenerhöhung erzielt werden kann.
R
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
Schrauben Sie die Aufschraublinse (A) bis zum Anschlag
auf den Tastkopf (B) des Lichtleiters, da sonst nicht die
maximale Reichweite / Betriebsreserve erreicht wird.
Die Linsenwirkung der zylindrischen Austrittsfläche bei zu
großem Abstand zwischen Tastkopfende und Austritts-
fläche führt zur Defokussierung des Lichtstrahls.
The attachment turns the light beam through 90° by means of a prism with a
cylindrical light exit.
The lateral light exit/entrance allows detection in areas with difficult access.
The cylindrical light exit behaves as a lens thus increasing available sensing range.
La lentille à renvoi d'angle 90° renvoie le faisceau à l'aide d'un prisme viateur qui
a une sortie de lumière cylindrique.
La sortie/l'entrée latérale de la lumière permet la détection de zones d'accès difficile.
La sortie de lumière à travers une lentille permet d'augmenter la portée.
Screw the attachment (A) until you feel the end of the
fibre optic sensing head (B), otherwise the maximum
sensing range/excess gain will not be achieved. If the
distance between the end of the sensing head and the
light exit is too great, the lens effect of the cylindrical
light exit brings the light beam out of focus.
Visser la lentille à renvoi d'angle (A) jusqu'à la butée de
la tête de tection (B) de la fibre optique. Si cela n'est
pas fait, la portée/capacide réserve maximale n'est pas
assurée. En cas de distance trop grande entre la fin de la
tête de détection et la sortie de lumière, l'effet de lentille
de la sortie de lumière cylindrique défocalise le faisceau.
A
B


Produkt Specifikationer

Mærke: IFM
Kategori: niet gecategoriseerd
Model: E20754

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E20754 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd IFM Manualer

IFM

IFM OU5013 Manual

4 Oktober 2024
IFM

IFM EVF502 Manual

4 Oktober 2024
IFM

IFM PZ0023 Manual

4 Oktober 2024
IFM

IFM DI5032 Manual

4 Oktober 2024
IFM

IFM EVC08A Manual

4 Oktober 2024
IFM

IFM OJ5060 Manual

4 Oktober 2024
IFM

IFM PT0504 Manual

4 Oktober 2024
IFM

IFM RV1054 Manual

4 Oktober 2024
IFM

IFM OY042S Manual

3 Oktober 2024
IFM

IFM PI3156 Manual

3 Oktober 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer