IFM EBF011 Manual

IFM Splitter EBF011

Læs nedenfor 📖 manual på dansk for IFM EBF011 (1 sider) i kategorien Splitter. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany • http://www.ifm.com • e-mail:info@ifm.com
UK
80296424 / 00 08 / 2020
1 Mounting
Connect the connector to the device; the arrow
indicates the right position of the coding.
To ensure the indicated protection rating, the cou-
pling nut must be tightened by hand (M8: 0.3...0.5
Nm, M12: 0.6...1.5 Nm).
For removal loosen the coupling nut and at the
same time press the connector against the device.
For applications in harsh environments tighten the
coupling nut by turning it one notch further with a
key (width across flats 14) to increase shock and
vibration resistance.
For removal also use a key (width across flats 14).
2 Electrical connection
The unit must be connected by a qualified electrician.
3 Maintenance, repair and disposal
If used correctly, no maintenance and repair measures are necessary.
Only the manufacturer is allowed to repair the unit.
After use dispose of the unit in an environmentally friendly way in accordance with the applicable
national regulations.
Installation instructions
Y-splitter


Produkt Specifikationer

Mærke: IFM
Kategori: Splitter
Model: EBF011

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM EBF011 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Splitter IFM Manualer

IFM

IFM EBC113 Manual

24 September 2024
IFM

IFM EBC118 Manual

7 September 2024
IFM

IFM EBC114 Manual

24 Juli 2024
IFM

IFM EBF009 Manual

20 Juli 2024
IFM

IFM EBT010 Manual

20 Juli 2024
IFM

IFM EBF010 Manual

2 Maj 2024
IFM

IFM EBF006 Manual

8 April 2024
IFM

IFM EBF008 Manual

5 Maj 2023
IFM

IFM EBC117 Manual

29 Januar 2023
IFM

IFM EBF007 Manual

16 December 2022

Splitter Manualer

Nyeste Splitter Manualer