IFM EVT358 Manual


Læs nedenfor 📖 manual på dansk for IFM EVT358 (1 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Verbinden Sie den Steckverbinder mit dem Sensor, der Pfeil
zeigt die richtige Lage der Kodierung. Um die angegebene
Schutzart zu gewährleisten, muss die Überwurfmutter mit
einem Anzugsdrehmoment von 0,6 Nm (handfest) bis 1,5 Nm
(Schlüsselmontage) angezogen werden.
Connect the connector to the sensor; the arrow indicates the
right position of the coding. To ensure the indicated
protection rating, the coupling nut must be tightened with a
tightening torque from 0.6 Nm (hand-tight) to 1.5 Nm (using
a torque wrench).
Raccorder le connecteur au capteur, la flèche indique la
bonne direction du codage. Afin d'assurer le degré de
protection indiqué, il faut serrer l'écrou avec un couple de
serrage de 0,6 Nm la main) à 1,5 Nm (avec une clé).
Montagehinweis / Mounting instruction / Instruction de montage
Beim Einsatz in rauen Umgebungen ziehen Sie die Über-
wurfmutter mit einem Schlüssel (SW14) eine Raste weiter
fest, um Schock- und Vibrationsfestigkeit zu erhöhen. Zur
Demontage verwenden Sie ebenfalls einen Schlüssel (SW14).
For applications in harsh environments tighten the coupling
nut by turning it one notch further with a key (width across
flats 14) to increase shock and vibration resistance.
For removal also use a key (width across flats 14).
Pour les applications en environnement agressif serrer
l'écrou en le tournant d'un cran d'arrêt supplémentaire, avec
une clé (cote sur plat 14), afin d'augmenter la tenue aux
chocs et vibrations. Utiliser également une clé (cote sur plat
14) pour le démontage.
Zur Demontage lösen Sie die Überwurfmutter und drücken
gleichzeitig den Steckverbinder gegen den Sensor.
For removal loosen the coupling nut and at the same time
press the connector against the sensor.
Pour le montage desserrer l'écrou et presser simultané-
ment le connecteur contre le capteur.
14
Sachnr. 704149/01 12/2007


Produkt Specifikationer

Mærke: IFM
Kategori: niet gecategoriseerd
Model: EVT358

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM EVT358 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd IFM Manualer

IFM

IFM OU5013 Manual

4 Oktober 2024
IFM

IFM EVF502 Manual

4 Oktober 2024
IFM

IFM PZ0023 Manual

4 Oktober 2024
IFM

IFM DI5032 Manual

4 Oktober 2024
IFM

IFM EVC08A Manual

4 Oktober 2024
IFM

IFM OJ5060 Manual

4 Oktober 2024
IFM

IFM PT0504 Manual

4 Oktober 2024
IFM

IFM RV1054 Manual

4 Oktober 2024
IFM

IFM OY042S Manual

3 Oktober 2024
IFM

IFM PI3156 Manual

3 Oktober 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer