IHome iB86 Manual

IHome Headset iB86

Læs nedenfor 📖 manual på dansk for IHome iB86 (2 sider) i kategorien Headset. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Specifications
Bluetooth specification Supports V4.0+ EDR with Handsfree Profile 1.5, Headset Profile 1.1 and A2DP
profile 1.2 (Class ll) and Audio/Video Remote Control Profile AVRP
Standby time
(un-paired) up to 90 days (with fully charged battery)
Talk time up to 15 hours (with fully charged battery)
Music Playing time up to 10 hours (with fully charged battery)
Operating Distance up to 10 meters / 33 feet
Certifications FCC, RoHS, BQB
1. Controls and Indicators
2. Charging Your Headphone
IMPORTANT: Your headphone operates on a built-in rechargeable lithium-ion battery. Although the
battery was fully charged when it left our factory, like all rechargeable batteries it can begin to
discharge during periods of non-use. We recommend that you charge the battery for at least 2.5
hours before first time use.
1. Connect the micro USB plug on the charging cable to the micro USB port on the headphone.
2. Connect the standard USB plug on the charging cable to any standard USB power port such as
found on a notebook computer, or the charging adapter for an iPod, iPhone, etc.
The Power/Charging/Pairing LED indicator will glow RED while the headphone is charging. The LED
indicator will turn off when the battery is fully charged.
Reminder: Allow the battery to charge for 2.5 hours before first time use. Normal recharge time after
first use should take about 2.5 hours. When fully charged the battery provides up to 15 hours of
working time, or 90 days of standby time.
Because your iB86 headphones use Bluetooth version 4.0 the battery level indicator of the
headphones may also appear on your smartphone home screen, usually adjacent to the phone’s own
battery level indicator, if your specific phone supports this display function.
3. Multi-Function Button (MFB)
Pressing the button answers/ends phone calls ( to switch between calls) and controls press and hold
Play/Pause function.
4. Switching the Power On and Off
1. Press and hold the Power button for approximately 3 seconds. The voice prompt will say “Power
On” and the LED indicator turns BLUE and flashes two times per second.
2. When the power is “On” press and hold the Power button for approximately 3 seconds. The voice
prompt will say “Power Off”. The LED indicator remains on briefly and then shuts off. This
indicates that the power is “Off”.
5. Manually Pairing With a Bluetooth Enabled Smartphone or Music
Player For The First Time
If your smartphone or music player is Bluetooth compatible (supports the A2DP Bluetooth Profile) you
may pair these iHome headphones with your phone or music player to listen to music and make or
receive calls as long as the two devices are within the Bluetooth operating range of approximately
33-feet of each other.
Note: Your iHome headphones must be in the Power “Off” mode to begin the manual pairing process.
1. Make sure that your iHome iB86 headphones are switched “Off”. Make sure that your smartphone
or music player is “On”.
2. Press and hold the Power button on your iB86 headphones for about 6 seconds until you hear the
“Power On” and “Pairing” voice prompts. The LED indicator begins alternately flashing blue and red
to indicate it is trying to pair with a compatible device.
3. If necessary, turn on the Bluetooth function of your phone or music player so that it begins searching
for a compatible device.
4. “iHome iB86” should appear on your phone or music player’s compatible devices list. You may also
see a message such as “Not Paired”. Tap on that message to complete the pairing process. If your
phone or music player asks for a “passwordto complete the pairing process, enter ‘0000’ on the
keypad of your phone or music player.
5. When pairing is successful the screen on your phone should show “iHome iB86 Connected” or
similar message and you will hear the voice prompt say Your device is connected”. The LED
indicator on the iB86 headphones will begin flashing blue two times per second. Your headphones
are now ready for use.
NOTE: If your iB86 headphones are not able to find a Bluetooth device that is in range and
“discoverable” after 3 minutes, the headphones will automatically power “Off” to preserve the battery.
6. Auto-Linking With A Previously Paired Device
If your iB86 headphones were previously paired with a Bluetooth enabled smartphone or music
player they will attempt to auto-link with that device again whenever that device is within the
Bluetooth operating range.
Press and hold the Power button on your iB86 headphones for about 3 seconds until you hear the
“Power On” voice prompt. If a previously paired device is found to be within range and turned ‘On’
the iB86 will re-link with it automatically. You will hear a beep tone and the voice prompt will say “Your
device is connected.
Note: If no previously paired device is found after 3 minutes the auto-linking function stops and your
iB86 headphones shut off automatically to preserve the battery life.
7. Wearing Your Headphones
Your iHome iB86 Bluetooth headphones are supplied with padded ear cushions for long wearing
comfort. The headband can be extended to accommodate almost any head size. There are ‘L and
‘R’ markings on the inside of the headband, When the headphones are worn properly the controls
will be on your right side.
8. Using Your Headphones
Note: Some of the functions described may not be supported on your specific smartphone. Check
with your smartphone owner’s manual to confirm the features supported by your phone.
Model: iB86
Ultra-portable wireless headphones
with mic+remote
FreedomFold
9. Auxiliary Input Jack and Cable
The auxiliary input jack allows you to use your iB86 Bluetooth
headphones as normal headphones so that you can listen to music on
any non-Bluetooth device that is equipped with a 3.5mm headphone jack.
Your iB86 headphones should be in the Power “Off” mode. Use the volume and track navigation controls
on your music player as you would with any normal headphones.
Function
Turn headphones “On”
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current
track or go to the previous track
Increase volume
Decrease volume
Answer an incoming
phone call
Decline an incoming
phone call
End a call
Transfer a call between the
phone and the headphones
Last number redial
Answer second call/
call waiting
Turn headphones “Off”
Action Required
When headphones are “Off” press and hold the power button for 3 seconds until you hear
the "Power On" voice prompt. Auto Power Off if no device paired within 3 minutes.
When headphones are “Off” press and hold the power button for 6 seconds until you hear
the "Pairing" voice prompt. Auto Power Off if no device paired within 3 minutes.
Make sure your Bluetooth device is “On” and discoverable. When iHome iB86 appears on
your device’s menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short
press to resume playback.
Short press the + button during playback.
Short press the – button during playback.
Press and hold the “+” button during playback.
At max volume you will hear the "Maximum Volume" voice prompt.
Press and hold the “ - ” button during playback.
Short press the MFB. NOTE: Music will automatically pause when you are answering a call
and resume when you end the call.
Double press the MFB to decline the incoming call.
Short press the MFB to end the call and “hang up”.
While the call is in progress double press the MFB to transfer the call between the phone
and the headphone.
When phone is paired with headphone but no call is in progress, double press the MFB to
redial the last number.
Short press the MFB to place the current call on hold and answer an incoming 2nd call.
Long press the MFB to return to previous call.
Press and hold the power button for 3 seconds until your hear the “Power Off” prompt and
LED indicator shuts off.
PREPARATION FOR USE
It is dangerous and illegal (in some jurisdictions) to use headphones when you are driving a car, riding a bike
or motorcycle, or operating a watercraft. Be aware of local laws and regulations.
Do not use these headphones in situations where they might cause distractions or prevent you from hearing
warning sounds.
There are no user serviceable parts in these headphones. Do not attempt any service or repairs on your own.
Refer to the warranty for service, repair or replacement information.
Your new iHome Bluetooth stereo headphones are designed to link with your Bluetooth enabled
smartphone or music player to allow you to wirelessly listen to music and answer phone calls within
the normal 33 feet (10 meter) Bluetooth operating range.
What’s Included
1
5
4
2
3
76 8
Computer
connected
to working
outlet
Computer USB port
USB Adaptor
(not included)
OR
1. Power On/Off
2. Multi-function button: Answer/End,
Play/Pause
3. Power/Pairing/Charging LED Indicator
4. Volume Up (+) Button
5. Volume Down ( - ) Button
6. Auxiliary Input Jack
7. Microphone
8. Micro USB Charging Port Right
Earcup
Front viewBack view
CARE AND MAINTENANCE
1. Reception is noisy or intermittent
Make sure that the headphones and the paired device are within the Bluetooth operating range of
approximately 33 feet.
2. No Sound
Make sure that your headphones are properly paired and connected with your Bluetooth enabled
smartphone or music player. Refer to the “Pairing instructions in this manual and in the manual
supplied with your phone or music player if necessary.
The rechargeable battery in your headphones may be exhausted and need to be recharged. Refer to
the “Charging Your Headphones” instructions in this manual.
3. Unable to Pair/Connect
The pairing settings between the headphones and your smartphone or music player may have been
erased or deleted. Follow the “Pairing” instructions in this manual to re-pair and reconnect the devices.
Turn off any other Bluetooth devices that are not being used to reduce external interference.
4. Some Functions Do Not Work
Your specific model of smartphone may not support some of the functions described in this manual.
Refer to the manual supplied with your phone for further information.
TROUBLESHOOTING
Connect the included cable to the auxiliary input jack on the bottom of
the “R" earpiece of your iB86 headphones, and to the headphone jack
of your auxiliary music source.
LIMITED 1 YEAR WARRANTY
Use of the Hangtag Cord Wrap
Remove hangtag
from package
1 Insert cable at plug end
into one of the slots on
one end of the hangtag.
3
Unfold hangtag
2
Wrap cable around middle
of hangtag as desired and
insert remainder through slot
on other end of hangtag.
4
1 2
• USB Charging Cable
Auxiliary Input Cable
Cord wrap
(Packaging Hangtag)
• Bluetooth Stereo Headphone
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally
purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the
warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification
of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping
instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media
players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return
to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the
original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders,
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is
contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your
SDI product. © 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Bluetooth is a registered trademark of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
Always remember to turn your headphones off if they will not be used for a long period of time. Do not
expose your headphones to extremely hot or cold temperatures for extended periods. Do not expose
them to direct sunlight or leave them in places such as the dashboard of your car on a hot day. Prevent
water or any other liquids from entering the cabinets of your headphones.
Protect Your Hearing
Using these, or any headphones at high volume levels for long periods can result in permanent hearing
damage. Always start listening with volume controls on your headphones and your paired smartphone or
music player at a low level and then gradually increase the volume controls to a comfortable listening level.
Important Notes
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Information
FCC ID: EMOiB86
IC: 986B-iB86
iB86-091615-B Printed in China
R
R
Introduction
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you
suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact
us for repair information.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace
your battery, you should follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply
to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,
please dispose of the device in a waste bin for electronic devices.
Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see
which ones in your area do so.
CAUTION:
The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated.
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other
electrolytic substance.
Always confirm that the temperature is 5°C - 35°C (41° - 95° Fahrenheit) before you charge the battery. Leakage
or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
Never expose the battery to excessive heat such as direct sunlight or re. Never use the battery pack in an
unventilated vehicle where excessive internal temperatures may be encountered.
Always keep the battery out of the reach of infants and small children.


Produkt Specifikationer

Mærke: IHome
Kategori: Headset
Model: iB86

Har du brug for hjælp?

Hvis du har brug for hjælp til IHome iB86 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Headset IHome Manualer

IHome

IHome Uproar iB46 Manual

29 August 2024
IHome

IHome NB464 Manual

29 August 2024
IHome

IHome iB98 Manual

29 August 2024
IHome

IHome iB87 Manual

29 August 2024
IHome

IHome iB90 Manual

29 August 2024
IHome

IHome NB447 Manual

29 August 2024
IHome

IHome Uproar iB42 Manual

29 August 2024
IHome

IHome iB81 Manual

29 August 2024
IHome

IHome iB42 Manual

29 August 2024

Headset Manualer

Nyeste Headset Manualer

FoneStar

FoneStar FA-8060 Manual

21 November 2024
Celly

Celly UP500 Manual

20 November 2024
Geemarc

Geemarc CL7500 OPTI Manual

19 November 2024
Gembird

Gembird TWS-SEA-GW Manual

16 November 2024
Shokz

Shokz OpenFit Air Manual

15 November 2024
Shokz

Shokz OpenComm2 Manual

15 November 2024