IHome Timebase II iBTW22B Manual

IHome Radio Timebase II iBTW22B

Læs nedenfor 📖 manual på dansk for IHome Timebase II iBTW22B (2 sider) i kategorien Radio. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Model: iBTW22

BLUETOOTH PAIRING

USB

CHARGING

PORT

- When connected to a BT device,

press to make voice commands

DISPLAY ICONS

- Press to answer a call

- Press & hold to end/reject a call

iBTW22IS-042321-A

Printed in China

For questions, warranty, and additional safety information, please

scan the QR code or visit:

www.ihome.com/help/ibtw22

TIMEBASE

Wireless Charging + Speaker

- Press & hold to enter Bluetooth

pairing mode

- Select ‘iHome TimeBase’ on

your device to connect

- To cancel pairing, press

Bluetooth button again

WARNING

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can

cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

• CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

1. Do not use this product near water.

2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can

damage the surface of the unit.

3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including ampliﬁers) that produce heat.

5. Only use attachments/accessories speciﬁed by the manufacturer.

6. Unplug this product during lightning storms or when unused for long periods of time.

7. Damage Requiring Service – This product should be serviced by qualiﬁed service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally.

8. No naked ﬂame sources, such as lighted candles, should be placed on this product.

9. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle

batteries and other electronic components at no charge. To ﬁnd a drop-o location near you, visit www.call2recycle.com

10. This product is suitable for use in tropical and/or moderate climates.

WARNING:

- To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture.

- Do not dispose of batteries in the household trash or ﬁre.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

• Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Information

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition

aux RF et la conformité.

Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Tout changement ou modiﬁcation non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de

l'utilisateur à utiliser l'équipement.

CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216

WIRELESS CHARGING

Supports:

• Qi compatible phones (also works with plastic cases up to 3mm thick*)

• Apple Air Pods

Place Qi compatible device facing upward on the charging rest. Charging status will be

indicated on the LED located under the iHome badge:

Note: Qi status LED may continue to blink slowly (indicating charging) for iOS devices that are fully charged.

CAUTION: Not all cases are wireless charging compatible. Remove phone’s metal protective case before

charging. Do not place magnetic or metal objects on charger during charging.

* Some larger size phone cases may not be able to charge. Please remove case to charge phone properly.)

SPEAKERPHONE

PLAY/PAUSE

-Press to play/pause audio

ALARM

- Press to Preview

- Press Again to Arm/Disarm

- Press & Hold to Set Alarm

(adjust with +/- and press

alarm to conﬁrm)

TIME SET

Press & Hold to Set Time

Release Time Set Button

when display is ﬂashing

Adjust time using /+ - and

press Time Set to conﬁrm

Repeat Step 3 to set year,

month, and date

WIRELESS CHARGING PAD

SET

- Press to decrease settings

SET

- Press to increase settings

POWER

- Press to turn ON/OFF

SNOOZE/DIMMER

- Press to snooze an alarm

- Press to adjust display brightness

AUTO DIMMING SENSOR

DC JACK

(for power supply)

BOTTOM PANEL

REAR PANEL

DST SWITCH

BACKUP BATTERY COMPARTMENT

By default, the DST Switch is set to Auto and will

automatically adjust the time in March/November

*Remove battery pull tab before use!

Wireless Charging Status

Bluetooth Status

PM Indicator

Alarm Indicator

Low Battery Indicator

for clock accuracy and alarm setting backup

When Low Backup Battery icon appears on the

display, install a new CR2450 battery

time set 5W USB-ADC 9V 3Abluetooth

Device is not charging (reposition device)

Device is charging

Device is fully charged

Rapid blinking icon:

Slow blinking icon:

Solid icon:

Produkt Specifikationer

Mærke:	IHome
Kategori:	Radio
Model:	Timebase II iBTW22B

Har du brug for hjælp?

Hvis du har brug for hjælp til IHome Timebase II iBTW22B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Radio IHome Manualer

IHome IBTW281B Manual

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

Radio Manualer

Nyeste Radio Manualer

Ferguson Regent i450S Manual

20 November 2024

Reflexion HRA-1255DAB Manual

20 November 2024

Majority MP3 Pro Manual

19 November 2024

Noxon iRadio 500 CD Manual

17 November 2024

GPX R116B Manual

17 November 2024

Technics OTTAVA f SC-C70MK2 Manual

16 November 2024

Soundmaster DAB85 Manual

16 November 2024

Muse M-928 FB Manual

15 November 2024

Numan One 2.1 Manual

3 November 2024

Yamazen JYTM-RTV430 Manual

31 Oktober 2024