Insignia NS-HTSB2123 Manual

Insignia Soundbar NS-HTSB2123

Læs nedenfor 📖 manual på dansk for Insignia NS-HTSB2123 (4 sider) i kategorien Soundbar. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
Before using your new product, please read these instructions to prevent any damage.
FEATURES
2.1-channel soundbar delivers a superior listening experience
Versatile hook-up options include HDMI ARC, optical digital, 3.5 mm AUX, USB,
and Bluetooth streaming
120 watts of power provides louder, cleaner-sounding audio
Wireless subwoofer provides a deep, powerful bass
HDMI ARC with clear audio streaming, allow your TV remote to control the
soundbar’s power and volume in sync with your TV
Bluetooth 5.3 capability with memory pairing, oers streaming functionality
DTS Virtual: X turns movies, TV shows, and playlists into an immersive,
multidimensional audio experience
DTS TruVolume™ provides a consistent and comfortable volume level for a more
enjoyable multimedia experience
Delicate Night Mode that allows you to hear the dialog clearly even at a low volume
Three sound modes (Theater, News, and Standard) oer a unique listening experience
Included remote control lets you have wireless control over your sound
USB port oers playback for WAV and MP3 les
Keyholes for wall mounting provide space-saving options
15
CONNECTING YOUR SOUNDBAR
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box to identify your audio OUT jacks. Choose one connection option
below that fits your audio source. You can connect several devices and switch the sound source as required.
Note: Turn o all devices while you are making connections.
Digital optical connection
1 Remove the caps from both ends of the included optical cable.
2 Connect one end of the digital optical cable to the OPTICAL IN
jack on your soundbar.
3 Connect the other end into the digital optical output jack on
your source device.
4 Change the device’s audio output to PCM format (typically found in audio
settings). Refer to the documentation that came with your audio source
device for more information.
5 After your soundbar is plugged in and turned on, press the (audio source
selector) button on your soundbar or remote control repeatedly until the
source indicator turns green.
- - OR
USB sound source
Note: If you mount your soundbar on a wall, you cannot use a USB thumbdrive as a sound source.
1 Plug a USB thumbdrive (with WAV or MP3 les) into the USB port on the back of your soundbar. FAT16/FAT32/ExFAT les are
acceptable.
2 After your soundbar is plugged in and turned on, press the (sound source selector) button on your soundbar or remote
control repeatedly until the source indicator turns purple.
3 Control USB playback by pressing the (Play/Pause), (Previous), and (Next) buttons on the remote control.
Note: If playback does not begin immediately, press the (Play/Pause) button on the remote control.
- - OR
- PICK ONE -
AUX IN connection
1 AUX IN Connect a 3.5 mm cable to the jack on your soundbar.
2 Connect the other end to a 3.5 mm jack on your audio source device.
3 After your soundbar is plugged in and turned on, press the (audio
source selector) button on your soundbar or remote control repeatedly
until the source indicator turns orange.
QUICK SETUP GUIDE
2.1-Channel
Wireless Soundbar
with Subwoofer
NS-HTSB2123
PACKAGE CONTENTS
Soundbar
Subwoofer
Power adapter (for soundbar)
AC power cord (for subwoofer)
FEATURES
Front view
Back view Top view
Subwoofer Remote control
Audio source with 3.5 mm jack
(smartphone, tablet, iPad, TV)
3.5 mm cable (included)
Back of your soundbar
Back of your soundbar
3.5 mm audio cable
Optical audio cable
Mounting screws
Wall anchors
Back of your soundbar
Power adapter
(included)
Audio source
(such as a TV, Blu-ray player,
or cable box)
Digital optical cable (included)
Back of your soundbar
# DESCRIPTION
1 Status indicator
2 Remote control sensor
3 HDMI (ARC) jack
4 AUX IN jack
5 USB port
6 OPTICAL IN jack
7 Power jack
8 (power) button
9 (audio source selector)
10 - / + buttons
11 PAIRING button and STATUS LED
12 AC IN jack
FUNCTION
Indicates the following:
Red solid: Standby mode
Green solid: Digital Optical mode
Orange solid: AUX IN mode
Detects signals from the remote control.
Connect an HDMI cable to this jack. Make sure that the sound output from the source is set to PCM format.
Connect a 3.5 mm audio cable to this jack.
Play WAV and MP3 les from a USB source.
If your TV (or other audio source device) has an optical out jack, connect a digital optical cable to your source
device and this jack. Make sure that the sound output from the source is set to PCM format.
Connect the power adapter to this jack to power the soundbar.
Press to turn on your soundbar. Press again to return to standby mode.
Press to cycle through the available audio sources. (AUX IN > Optical > HDMI ARC > BT > USB)
Press to decrease or increase your soundbar’s volume.
Press and hold for three seconds to disconnect or reconnect with your soundbar.
The indicator LED blinks turquoise in pairing mode and lights when paired. solid turquoise
It will light when in standby mode.red
Connect the AC power cord to this jack to power the subwoofer.
SOUNDBAR
SUBWOOFER
Blue solid: Bluetooth mode
Purple solid: USB mode
: HDMI ARC modeWhite solid
# DESCRIPTION
1 (power)
2
buttons
3 Bluetooth/USB
buttons
4 Sound Mode
select
5 SUB- / SUB+
6 Source
7 Mute
8 VOL+ / VOL-
FUNCTION
Press to turn on your soundbar. Press again to put your soundbar into standby mode.
Press to toggle night mode on or o. The status LED blinks turquoise once when on and red once when o.
(Night mode allows you to hear the dialog clearly and provides comfortable volume when watching movies or TV shows at night, while not disturbing others.)
Press to toggle TruVolume mode on or o. The status LED blinks purple once when on and red once when o. (DTS TruVolume™ mode provides a consistent and
comfortable volume level for a more enjoyable multimedia experience.)
Note: Only one mode can be turned on at a time, the other mode will be turned o automatically.
When a Bluetooth or USB source is selected, press to control playbacks:
Previous / Play/Pause / Next / PAIR: press and hold the Play/Pause key for 3 seconds to disconnect Bluetooth connection.
Press one of these buttons to select the sound mode:
Press (STANDARD ) for general music or TV shows.
Press NEWS to optimize the spoken voice or dialog for TV news.
Press (THEATER ) to optimize movie sound for a theater setting.
The default setting for your soundbar is THEATER mode. (THEATER mode activates the DTS Virtual:X setting, which allows you to hear every detail and transforms any movie,
TV show, or playlist into an immersive, multidimensional audio experience).
Note: The status LED blinks white when you select each mode. It blinks turquoise or purple once if Night mode or TrueVolume mode is selected.
Press to decrease or increase the volume of your subwoofer.
Press repeatedly to cycle through the available audio sources.
Press to mute the sound from your soundbar. Press again to restore the sound.
Press to increase or decrease the volume of your soundbar.
HDMI ARC connection
1 ARC Connect an HDMI cable (not included) to the (HDMI) jack on your
soundbar.
2 Connect the other end of the HDMI cable to the HDMI IN (ARC) connection
on your TV.
3 Make sure that your TV’s output settings are correct:
a. Turn on your TV’s CEC and ARC audio control functions (typically found in
system or HDMI settings).
b. Change your TV’s audio output to the PCM format (typically found in audio
settings).
See the documentation that came with your TV for more information.
4 After your soundbar is plugged in and turned on, press the (audio source
selector) button on your soundbar or remote control repeatedly until the
source indicator turns white.
Back of your soundbar
Audio source (TV)
HDMI cable
(not included)
HDMI IN (ARC)
CONNECTING THE AC POWER
IMPORTANT: Before you connect your soundbar to an audio source, you need to
connect it to the provided power adapter.
CAUTION: Make sure that the electrical outlet matches the input requirements of the
power supply (100-240V, 50/60Hz) before connecting.
Plug the power adapter into a power outlet or surge protector.
CONNECTING THE SUBWOOFER
Note: When you turn on your soundbar for the rst time, the status indicator lights orange.
1 Place your subwoofer within 30 ft. (10 m) of your soundbar.
2 Plug in your subwoofer. Your soundbar and subwoofer automatically connect, then
the pairing indicator lights solid turquoise on the subwoofer and the appropriate
indicator (orange=AUX IN, green=Digital Optical, blue=Bluetooth, white=HDMI ARC,
and purple=USB) on your soundbar.
Remove the cap before use
AUDIO QUALITY
BEST
BETTER
GOOD
JACK TYPE (on source device)
HDMI cable (not included)
Digital optical cable (included)
3.5 mm audio cable (included)
CABLE
Remote control
AAA batteries (2)
Mounting template
Quick Setup Guide
PAIRING button
REMOTE CONTROL
/


Produkt Specifikationer

Mærke: Insignia
Kategori: Soundbar
Model: NS-HTSB2123

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-HTSB2123 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Soundbar Insignia Manualer

Soundbar Manualer

Nyeste Soundbar Manualer

Kogan

Kogan KADA312WRSA Manual

19 December 2024
Boss

Boss SB18BRGB Manual

11 December 2024
SoundTube

SoundTube IPD-TSB2.0 Manual

10 December 2024
Nedis

Nedis SPSB420BK Manual

9 December 2024
Muse

Muse M-1680 SBT Manual

9 December 2024