JBL AC16 Manual

JBL Højttaler AC16

Læs nedenfor 📖 manual på dansk for JBL AC16 (2 sider) i kategorien Højttaler. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
AC16
Ultra Compact 2-way Loudspeaker
System with 1 - 6.5" LF
Key Features:
䉴
Ultra compact enclosure
䉴
165 mm (6.5 in) LF transducer
䉴
90° x 90° Progressive Transition™
waveguide with a 25 mm (1 in) exit
compression driver
䉴
Dual Neutrik NL4 connectors plus
screw terminals
䉴
Multiple Attachment Points for Ultimate
Flexibility
Applications:
䉴
Performing Arts Facilities
䉴
Houses of Worship
䉴
Sports Facilities
䉴
Multi Media Spaces
䉴
Retail Spaces
䉴
Presentation Suites
䉴
Educational Facilities
䉴
Portable Audio-Visual Systems
The AC16 is an ultra-compact full-
range loudspeaker system designed to
provide maximum bandwidth and SPL
in a single system package and yet be
visually unobtrusive. The enclosure
design allows for installation very close
to walls and ceilings making it an ideal
choice for under balcony, column, or
wall mounting. The high frequency
device is a 1" exit compression driver
integrated into a newly designed 90° x
90° PT™ (Progressive Transition)
waveguide providing even coverage
throughout the intended listening area.
The combination exhibits smooth
power response resulting in extremely
natural voicing. The AC16 utilizes a 6.5"
Symmetrical Field Geometry (SFG™) LF
Transducer with a copper-clad
aluminum edge wound 2" voice coil
and a copper-clad pole piece that
improves performance by reducing
voice coil inductance and distortion.
The rugged multi-ply hardwood
enclosure is designed to work in the
vertical plane as well as in the
horizontal plane. Mounting points are
provided for an optional U-bracket and
for an OmniMount®type bracket. The
AC16 is also equipped with attachment
points located on the bottom of the
enclosure for a stand mount accessory.
The rugged plywood enclosure
features JBL’s textured DuraFlex™
finish and is equipped with a heavy
duty powder coated steel, foam-backed
grille.
Specifications:
System:
Frequency Range (-10 dB): 55 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8 dB (avg. 500 Hz - 16 kHz)
System Sensitivity
1
: 90 dB SPL/1W/1m
Rated Maximum SPL (1m)
2
: 110 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating
3
:
(Continuous/Program/Peak): 160 W / 320 W / 640 W
AES Standard Power Rating
4
: 250 W
Crossover: 2.4 kHz
Transducers:
Low Frequency Driver:
1 x JBL 226J, 165 mm (6.5 in) SFG™ driver with 50 mm (2 in)
edge wound voice coil
High Frequency Driver: 1 x 2414H 25 mm (1 in) exit compression driver, 25 mm (1 in)
voice coil
High-Fr equency Waveguide: PT-B99HF-1
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 5 x M8 points; 1 top, 3 bottom, 1 rear.
4 x M6 rear for OmniMount
®
30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions
5
: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®
NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4’s +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 381.0 x 199.4 x 226.1 mm
(15.0 x 7.8 x 8.9 in)
Weight: 7.2 kg (15.8 lb)
Optional Accessories: MTU-16 U-Bracket
365469-001, M8 x 38 Tee Knot Thumbscrew kit for use with
BMB-200k or K & M 195/8 stand mount accessory
1
On axis SPL measured in far field and referenced to 1 meter by inverse square law. Average from 300 Hz to 16 kHz.
2
Calculated based on system sensitivity and continuous power handling.
3
IEC shaped pink noise, 6 dB crest factor, 100 hour duration.
4
AES standard 2 hour duration, with IEC system noise spectrum.
5
WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for
direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or
rapid changes in temperatures. See WRC/WRX configuration sheet for details.
JBL continually engages in research related to product improvement. Changes introduced into existing products
without notice are a routine expression of that philosophy.

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: AC16

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL AC16 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Media 2000 Manual

20 December 2024
JBL

JBL Media Sub Manual

20 December 2024
JBL

JBL Media Sub 2000 Manual

20 December 2024
JBL

JBL SCS150 Manual

20 December 2024
JBL

JBL SAT Pair 135 Manual

20 December 2024
JBL

JBL SCS125 Manual

20 December 2024
JBL

JBL SCS135S Manual

20 December 2024
JBL

JBL SCS136 Manual

20 December 2024
JBL

JBL SCS135P Manual

20 December 2024
JBL

JBL Northridge E60 Manual

20 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sony

Sony SS-MB200H Manual

22 December 2024
Sony

Sony SS-SPG01 Manual

22 December 2024
HK Audio

HK Audio L5-112X Manual

22 December 2024
Sven

Sven SPS-830 Manual

22 December 2024
Braun

Braun LE03 Manual

21 December 2024
Philips

Philips Fidelio DS7650 Manual

21 December 2024
Philips

Philips Fidelio FW1 Manual

21 December 2024
Philips

Philips TAPB600 Manual

21 December 2024
Philips

Philips HTL3380 Manual

21 December 2024
Philips

Philips SPA725 Manual

21 December 2024