JBL AC18/95 Manual

JBL Højttaler AC18/95

Læs nedenfor 📖 manual på dansk for JBL AC18/95 (2 sider) i kategorien Højttaler. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Compact 2-way Loudspeaker
System with 1 - 8" LF
Key Features:
䉴
Compact enclosure
䉴
205 mm (8 in) LF transducer
䉴
90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
䉴
Dual Neutrik NL4 connectors plus
screw terminals
䉴
Multiple Attachment Points for Ultimate
Flexibility
Applications:
䉴
Performing Arts Facilities
䉴
Houses of Worship
䉴
Sports Facilities
䉴
Multi Media Spaces
䉴
Retail Spaces
䉴
Presentation Suites
䉴
Educational Facilities
䉴
Portable Audio-Visual Systems
The AC18/95 is a compact full-range
loudspeaker system designed to
provide maximum bandwidth and SPL
in a single system package and yet be
visually unobtrusive. The enclosure
design allows for installation very close
to walls and ceilings making it an ideal
choice for under balcony, column, or
wall mounting. The high frequency
device is a 1" exit compression driver
integrated into a newly designed 90° x
50° rotatable PT™ (Progressive
Transition) waveguide providing even
coverage throughout the intended
listening area. The combination exhibits
smooth power response resulting in
extremely natural voicing. The AC18/95
utilizes an 8" Symmetrical Field
Geometry (SFG™) LF Transducer with a
copper-clad aluminum edge wound
2.5" voice coil and a copper-clad pole
piece that improves performance by
reducing voice coil inductance and
distortion.
The rugged multi-ply hardwood
enclosure is designed to work in the
vertical plane as well as in the
horizontal plane. Mounting points are
provided for an optional U-bracket and
for an OmniMount®type bracket. The
AC18/95 is also equipped with
attachment points located on the
bottom of the enclosure for a stand
mount accessory.
The rugged plywood enclosure
features JBL’s textured DuraFlex™
finish and is equipped with a heavy
duty powder coated steel, foam-backed
grille.
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity
1
: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)
2
: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating
3
:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating
4
: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver:
1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Fr equency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount
®
30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions
5
: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®
NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4’s +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb)
Optional Accessories: MTU-18 U-Bracket
365469-001, M8 x 38 mm Tee Knob Thumbscrew Kit for use
with BMB-200k or K&M 195/8 stand mount accessory.
1On axis SPL measured in far field and referenced to 1 meter by inverse square law. Average from 300 Hz to 16 kHz.
2Calculated based on system sensitivity and continuous power handling.
3IEC shaped pink noise, 6 dB crest factor, 100 hour duration.
4AES standard 2 hour duration, with IEC system noise spectrum.
5WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for
direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or
rapid changes in temperatures. See WRC/WRX configuration sheet for details.
JBL continually engages in research related to product improvement. Changes introduced into existing products
without notice are a routine expression of that philosophy.
AC18/95

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: AC18/95

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL AC18/95 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Media 2000 Manual

20 December 2024
JBL

JBL Media Sub Manual

20 December 2024
JBL

JBL Media Sub 2000 Manual

20 December 2024
JBL

JBL SCS150 Manual

20 December 2024
JBL

JBL SAT Pair 135 Manual

20 December 2024
JBL

JBL SCS125 Manual

20 December 2024
JBL

JBL SCS135S Manual

20 December 2024
JBL

JBL SCS136 Manual

20 December 2024
JBL

JBL SCS135P Manual

20 December 2024
JBL

JBL Northridge E60 Manual

20 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sony

Sony SS-MB200H Manual

22 December 2024
Sony

Sony SS-SPG01 Manual

22 December 2024
HK Audio

HK Audio L5-112X Manual

22 December 2024
Sven

Sven SPS-830 Manual

22 December 2024
Braun

Braun LE03 Manual

21 December 2024
Philips

Philips Fidelio DS7650 Manual

21 December 2024
Philips

Philips Fidelio FW1 Manual

21 December 2024
Philips

Philips TAPB600 Manual

21 December 2024
Philips

Philips HTL3380 Manual

21 December 2024
Philips

Philips SPA725 Manual

21 December 2024