JBL AC2212/00 Manual

JBL Højttaler AC2212/00

Læs nedenfor 📖 manual på dansk for JBL AC2212/00 (4 sider) i kategorien Højttaler. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/4
AC2212/00
Compact 2-Way Loudspeaker
with 1 x 12" LF
Key Features:
c
100° x 100° Coverage.
c
PT™ Progressive Transition™
Waveguide for good pattern control
with low distortion.
c
Bi-Amp/Passive Switchable.
c
Optional U-Bracket for easy installation.
c
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
c
Lecture halls
c
Houses of worship
c
Corporate learning centers
c
Small performing arts facilities
c
Theatrical sound design
c
Auditoriums
c
Sports facilities
c
Themed entertainment venues
AC2212/00 is a compact 2-way full-
range loudspeaker system comprised of
one 300 mm (12 in) low frequency
driver and one 38 mm (1.5 in) exit/
44 mm (1.75 in) voice-coil compression
driver. The PT Pr essive Togr ransition
waveguide provides wide 100° by 100°
coverage. High-slope passive crossovers
minimize band overlap.
The cabinet is fitted with M10
threaded suspension points. Optional
U-bracket, as well as pre-engineered
array bracketry is available for easy
installation. Four threaded inserts locat-
ed on back of the enclosure allow
attachment of an Omnimount™ or
similar mounting bracket.
AC2212/00 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
Specifications:
System:
Frequency Range1(-10 dB): 50 Hz – 19 kHz
Frequency Response1(±3 dB): 55 Hz – 17 kHz
Coverage Patter ° x 100°n: 100
Dir 7.1ectivity Factor (Q):
Directivity Index (DI): 8.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes2: 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz
Transducer Power Rating (AES)3: LF: 300 W (1200 W peak), 2 hrs
250 W (1000 W peak), 100 hrs
HF: 50 W (200 W peak), 2 hrs
Long-Term System Power Rating (IEC)4: Passive mode: 250 W (1000 W peak), 100 hrs
Maximum SPL5: Bi-amp mode:
LF: 120 dB-SPL cont avg (126 dB peak)
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
System Sensitivity6(1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver:
1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity 6(1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: JBL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver,
44 mm (1.75 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware. 4 x M8 on rear for Omnimount™ 60 Series
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
Input Connector: NL4 Neutrik Speakon®and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 19.1 kg (42 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-4
Optional planar array frame kit. See AE Series Bracket Guide
1Bi-amp mode, with recommended active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free fi eld, no additional sensitivity gain from boundary loading.
JBL continually engages in resear ch related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: AC2212/00

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL AC2212/00 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Media 2000 Manual

20 December 2024
JBL

JBL Media Sub Manual

20 December 2024
JBL

JBL Media Sub 2000 Manual

20 December 2024
JBL

JBL SCS150 Manual

20 December 2024
JBL

JBL SAT Pair 135 Manual

20 December 2024
JBL

JBL SCS125 Manual

20 December 2024
JBL

JBL SCS135S Manual

20 December 2024
JBL

JBL SCS136 Manual

20 December 2024
JBL

JBL SCS135P Manual

20 December 2024
JBL

JBL Northridge E60 Manual

20 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sony

Sony SS-MB200H Manual

22 December 2024
Sony

Sony SS-SPG01 Manual

22 December 2024
HK Audio

HK Audio L5-112X Manual

22 December 2024
Sven

Sven SPS-830 Manual

22 December 2024
Braun

Braun LE03 Manual

21 December 2024
Philips

Philips Fidelio DS7650 Manual

21 December 2024
Philips

Philips Fidelio FW1 Manual

21 December 2024
Philips

Philips TAPB600 Manual

21 December 2024
Philips

Philips HTL3380 Manual

21 December 2024
Philips

Philips SPA725 Manual

21 December 2024