JBL AM7315 Manual

JBL Højttaler AM7315

Læs nedenfor 📖 manual på dansk for JBL AM7315 (4 sider) i kategorien Højttaler. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
AM7315/95
High Power 3-Way Loudspeaker
with 1 x 15" LF Driver &
Rotatable Horn
Key Features:
90° x 50° Coverage, rotatable for use in
either vertical or horizontal orientation.
2265H Differential Drive
®
Low-
Frequency Driver
CMCD™ Cone Midrange Compression
Driver provides low midrange
distortion, increased sensitivity,
extended bandwidth and improved
phase coherency.
2432H High-Frequency Compression
Driver
PT™ Progressive Transition Waveguide
for excellent pattern control with low
distortion.
Bi-Amp/Tri-Amp Switchable.
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
Performing arts facilities
Theatrical sound design
Auditoriums
Houses of worship
Live nightclubs
Dance-clubs/discotheques
Sports facilities
Themed entertainment venues
AM7315/95 is a high power 3-way
full-range loudspeaker system
comprised of one 380 mm (15 in)
Differential Drive®low frequency
driver, one 200 mm (8 in) CMCD Cone
Midrange Compression Driver, and one
38 mm (1.5 in) exit/75 mm (3 in)
voice-coil HF compression driver. The
multi-band PT Progressive Transition
mid-high frequency waveguide
provides well-controlled 90° by 50°
coverage and is rotatable for cabinet
positioning in either horizontal or
vertical orientation. High-slope
crossovers minimize band overlap and
well-controlled off-axis response
enhances arrayability.
The cabinet is fitted with M10
threaded suspension points. Pre-
engineered array bracketry is available.
AM7315/95 is part of JBL’s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of fixed installation
applications.
Specifications:
System:
Frequency Range1(-10 dB): 38 Hz 20 kHz
Frequency Response1(±3 dB): 45 Hz 18 kHz
Coverage Pattern: 90° x 50°, rotatable waveguide
Directivity Factor (Q): 11
Directivity Index (DI): 10.5 dB
Crossover Modes: Tri-amp/Bi-amp switchable
Crossover Frequencies 2: 300 Hz and 2.2 kHz
Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs
750 W (3000 W peak), 100 hrs
MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC)4: LF: 600 W (2400 W peak), 100 hrs
MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5: LF: 127 dB-SPL cont avg (133 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 133 dB-SPL cont avg (139 dB peak)
Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity of Passive Sections6(1W @ 1m): MF/HF Section in Bi-amp mode: 108 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in ) Differential Drive driver with 75 mm (3 in)
dual voice coil
Nominal Impedance: 8 ohms
Sensitivity
6(1W @ 1m): 97 dB SPL
Midrange Driver: JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm
(8 in) diameter Differential Drive®dual voice-coil internal driver
Nominal Impedance: 8 ohms
Sensitivity
6(1W @ 1m): 108 dB SPL
High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity
6(1W @ 1m): 113 dB SPL
Waveguide: PT-K95MH
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent
black foam backing.
Input Connector: NL8 Neutrik Speakon®and CE-compliant covered barrier strip terminals.
Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width
9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-
through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation): 967 x 561 x 657 mm
(38.1 x 22.1 x 25.9 in)
Net Weight: 45.8 kg (101 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
Optional planar array frame kit. See AE Series Bracket Guide.
1Bi-amp mode, with recommended active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating plus long-
term 100 hr rating are specified for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hrs, with recommended active bi-amp tuning.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an
expression of that philosophy.
Professional Series


Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: AM7315

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL AM7315 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler JBL Manualer

JBL

JBL Cinema Sound CS46 Manual

20 November 2024
JBL

JBL AS5 Manual

20 November 2024
JBL

JBL B-6ICDT Manual

20 November 2024
JBL

JBL AS65C Manual

20 November 2024
JBL

JBL B-8IC Manual

20 November 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Samson

Samson Rubicon R5A Manual

22 November 2024
Samson

Samson Rubicon R8a Manual

22 November 2024
Kramer

Kramer Tavor 8-Sub Manual

21 November 2024
Kramer

Kramer Galil 6-AW Manual

21 November 2024
Extron

Extron SM 28 Manual

20 November 2024
Extron

Extron SF 3CT LP Manual

20 November 2024
QSC

QSC HPR181W Manual

20 November 2024
Sven

Sven PS-255 Manual

20 November 2024
Sven

Sven PS-860 Manual

20 November 2024
Infinity

Infinity Primus C25 Manual

20 November 2024