JBL AWC129 Manual

JBL Højttaler AWC129

Læs nedenfor 📖 manual på dansk for JBL AWC129 (3 sider) i kategorien Højttaler. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
Professional Series
Key Features:
u
Highly weather-resistant IP56 rating.
u
Consistent 90° x 90° broadband pattern control.
u
Components:
• 300 mm (12 in) woofer with Kevlar-reinforced
cone and 75 mm (3 in) voice coil.
• 25 mm (1 in) exit compression driver with
unique patented design and high temperature
polymer diaphragm.
u
Extraordinary clarity for speech, with extended
frequency response for music.
u
Advanced high-slope crossover network for
constant coverage and smooth, natural midrange.
u
400 Watt power handling (average continuous pink
noise) with high sensitivity provides high SPL
capability.
u
High-power passive crossover network.
u
Overload protection.
u
55 Hz – 20 kHz frequency response.
u
200 Watt 70V/100V multi-tap (built-in
transformer) or direct 8Ω low-impedance.
Applications:
The AWC129 is a compact, coaxial-driver,
2-way, highly weather-resistant full-range
loudspeaker system which is ideal for speech and
music in a wide variety of applications, including
sports facilities, racetracks, stadiums, fairgrounds,
rodeos, skating rinks, themed entertainment
venues, cruise ships, water parks, outdoor
background music/paging systems, swimming
pools, and a wide variety of other outdoor or
indoor venue types.
The AWC129 is comprised of a high-power
coaxial 300 mm (12 in) low frequency driver and
25 mm (1 in) high frequency compression driver.
The co-axial design utilizes a unique tapered
polepiece design and transitions to the cone of
the low frequency driver as a large diameter
pattern control horn for the high frequencies,
both eliminating high-frequency beaming which
is common among this category of speaker and
extending pattern control to the lowest possible
frequencies. The result is a coaxial speaker with
wide, extremely consistent 90° coverage on a
broadband basis.
Component features include a Kevlar-reinforced
low frequency cone for reliability, well-damped
surround for smooth frequency response, high
temperature 75 mm (3 in) voice coil and a reduced
distortion design through saturated-gap magnet
geometry. The high frequency compression
driver features a unique patented design, high
temperature polymer diaphragm, and uid-cooling
for high output levels with low distortion.
The paintable enclosure is constructed of
thick ABS plus berglass and is heavily braced
to maximize low-frequency performance. The
corrosion-resistant zinc-rich extra-thick powder
coated steel grille is backed with open cell foam
and high thread-count mesh, providing excellent
protection in the harshest environments. The
system is rated IP-56, per IEC529 when installed
at minimum 5° down-tilt.
The system is equipped with a 200W 70V/100V
multi-tap transformer. Connection is made via
outdoor-rated terminals in a recessed terminal
cup. A protective terminal compartment cover
is included, along with gland nut, which forms a
water-tight seal with round-jacketed cable having
The high frequency compression driver features a
unique patented design, high temperature polymer
diaphragm, and uid-cooling for high output levels
with low distortion.
A heavy-duty weather-capable zinc-rich, thick
powder coated U-type mounting bracket is
included.
Specications:
AWC129
All-Weather Compact
2-Way Coaxial
Loudspeaker with 12” LF
System:
Frequency Range (-10 dB)1: 55 Hz – 20 kHz
Frequency Response (±3 dB)1: 80 Hz – 20 kHz
Coverage Pattern2: 90º x 90º
Directivity Factor: 10.1 (1 k – 16 kHz)
Directivity Index (DI): 9.5 dB (1 k – 16 kHz)
Long-Term System Power Rating (IEC)3: 400 W (1600 W peak), 2 hrs.
250 W (1000 W peak), 100 hrs
Sensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz – 20 kHz)
Maximum SPL4: Direct 8: 122 dB (peaks of 124 dB)
200 W Tap: 119 dB
Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF,
2nd order low-pass to LF
Nominal Impedance: 8 ohms
Transformer Taps: 70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Transducers:
Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.
High Frequency Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature
polymer diaphragm, patented design, uid-cooling.
HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection
Physical:
Enclosure: ABS with Glass enclosure, heavily braced
Attachment: Two M10 (ne-thread) points for included U-bracket. Reference torque
15 lb (20 Nm). M6 secondary safety attachment point on back panel.
Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille,
3-layer assembly with foam and woven poly mesh backing.
Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept
up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up
to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment
cover equipped with gland nut that forms water-tight seal with round-
jacketed cables with outside diameters between 4.0 mm (0.16”) and
9.0 mm (0.36”).
Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds
Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM
G85 for acid-air/salt-spray (336 hrs).
Dimensions: 402 x 402 x 445 mm (15.8 x 15.8 x 17.5 in), cabinet
470 mm (18.5 in) depth including gland nut
542 mm (21.4 in) including bracket extending to back
Colors: Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight: 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with U-bracket
Shipping Weight: 23.4 kg (51.5 lb)
Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra
thick powder coated, steel.
¹ Full-space (free-eld)
² Average 1 kHz to 10 kHz
3
IEC standard, full bandwidth pink noise with 6 dB crest factor.
4
Calculated based on power rating and measured full-space sensitivity.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.

Produkt Specifikationer

Mærke: JBL
Kategori: Højttaler
Model: AWC129

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL AWC129 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler JBL Manualer

JBL

JBL Cinema Sound CS6100 Manual

11 Februar 2025
JBL

JBL 4349 Manual

11 Januar 2025
JBL

JBL Balboa 30 Manual

31 December 2025
JBL

JBL 250Ti Manual

31 December 2025
JBL

JBL 800 Manual

31 December 2025
JBL

JBL 900 Manual

31 December 2025
JBL

JBL Control CM40AW Manual

31 December 2025
JBL

JBL Century Gold Manual

31 December 2025
JBL

JBL ARC10 Manual

31 December 2025
JBL

JBL Control 1 Xtreme Manual

31 December 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Moonki

Moonki MS-HF10000 Manual

23 Februar 2025
Moonki

Moonki MS-HF6500 Manual

23 Februar 2025
Xiaomi

Xiaomi Smart Speaker (IR Control) Manual

22 Februar 2025
Iluv

Iluv Aud Air Manual

21 Februar 2025
Paradigm

Paradigm CI Home H65-R v2 Manual

21 Februar 2025
Sonus Faber

Sonus Faber Lumina Amator II Manual

21 Februar 2025
Coastal Source

Coastal Source EB103W6.5-8BN Manual

21 Februar 2025
Paradigm

Paradigm CI Home H65-A v2 Manual

21 Februar 2025
Paradigm

Paradigm CI Home H65-SM v2 Manual

21 Februar 2025
Paradigm

Paradigm CI Home H80-R v2 Manual

21 Februar 2025