Joranalogue Cycle 5 Manual


Læs gratis den danske manual til Joranalogue Cycle 5 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Joranalogue Cycle 5, eller vil du spørge andre brugere om produktet?

Side 1/6
CYCLE 5
VARI-
WAVE OSCILLATOR
1
INTRODUC TIO N
A small oscillator that packs a punch: that’s the
best way to summarise Cycle 5.
At its heart lies a refined high-stability triangle
core voltage controlled oscillator (VCO), with
performance matching or exceeding that of
much bigger and costly oscillator modules.
Instead of a coarse frequency knob, a 7-position
octave switch is provided. This in combination
with a perfect fifth transposition switch and
factory pitch tuning, makes Cycle 5 an
exceptionally straightforward and musical VCO
to use: simply centre the fine tune knob, and the
module will be instantly tuned to reference C.
Meanwhile, its dual precision volt per octave
inputs add a great deal of versatility. For example,
one could be used for pitch sequencing and the
other as a generic exponential FM input, or both
sequenced together for transposition effects—
the dual inputs serving -as a built in precision
adder.
Sporting all the classic waveforms, ranging from
sine wave, triangle, saw and square/saw, as well
as a hard sync input and low frequency oscillator
(LFO) mode, Cycle 5 makes for a real workhorse
VCO. The novel trigonometric waveshaper results
in a very clean sine wave, ideal for sub bass duty.
Cycle -5’s highlight however, is its vari wave
feature. By adjusting the vari-wave knob, the
waveform on the matching output will smoothly
morph from sine, to triangle, saw, square and
finally a very narrow pulse. The vari-wave
parameter can be CV controlled, up to audio
frequencies for some intense timbres.
Equally at home as a modest modulation
companion to big VCOs, as being in the spotlight
in miniature or polyphonic systems, Cycle 5
might just be the most multi talented tiny -
analogue oscillator yet.
CONTENTS
In the Cycle ’ll 5 box, you find:
Product card, stating serial number and
production batch.
16- -10-to pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 5 he Cycle module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
CYCLE 5
VARI-
WAVE OSCILLATOR
2
SIGNAL FLOW
CONTROLS & CONNECTIONS
1 R SWITCH FREQUENCY ANGE
This switch determines over which frequency
range Cycle 5 will operate: low frequency
(VCLFO) or audio frequency (VCO).
2 OCTAVE SWITCH
The rotary octave switch sets the oscillation
frequency in octave steps: every time the knob is
advanced one position clockwise, the frequency
will be doubled.
In the audio frequency mode, the base
frequenc range ies from 2.1 C1 (33 Hz) to C7 ( )kHz ,
placing ‘middle C (C4) in the centre switch
position. Using the additional frequency controls,
the total range is A 27.5 A 7 ( . 0 ( Hz) to #/Bb 3.7 kHz)
Frequencies beyond this range be reached may
using external CV.
In low frequency mode, the total frequency
range without CV is 48 mHz (a period of 20
seconds) to 6.9 Hz.
3 FIFTH SWITCH
When switched down, the tritone switch adds 7
semitones to the current pitch. For example, C1
will be transposed up to G1, the interval between
them forming a perfect fifth.


Produkt Specifikationer

Mærke: Joranalogue
Kategori: Ikke kategoriseret
Model: Cycle 5

Har du brug for hjælp?

Hvis du har brug for hjælp til Joranalogue Cycle 5 stil et spørgsmål nedenfor, og andre brugere vil svare dig