Juki HZL-27Z Manual

Juki Symaskine HZL-27Z

Læs nedenfor 📖 manual på dansk for Juki HZL-27Z (48 sider) i kategorien Symaskine. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/48
“ When using an electrical appliance, basic safety precautions should always be followed, including the following.”
“ Read all instructions before using this sewing machine.”
“DANGER
-
To reduce the risk of electric shock:”
“IMPORTANT SAFETY INSTRUCTIONS”
1. “This sewing machine should never be left unattended when plugged in. Always unplug this sewing
machine from the electric outlet immediately after using and before cleaning.”
“WARNING
-
To reduce the risk of burns, re, electric shock, or injury to persons: ”
1. “Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.”
2. “This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
3. Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.”
4. “Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or
service center for examination, repair, electrical or mechanical adjustment.”
5. “If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.”
6. “Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot control free from the accumulation of lint, dust, and loose cloth.”
7. “Never drop or insert any object into any opening.”
8. “Indoors use only.”
9. “Do not operate where aerosol (spray) products are being used or where oxygen is being administered.”
10. “To disconnect, turn switch to the off („0“) position, then remove plug from outlet.”
11. “Switch off or unplug the appliance when leaving it unattended, Unplug the appliance before carrying out
maintenance or replacing lamps.”
12. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.”
13. “Keep ngers away from all moving parts. Special care is required around the sewing machine needle.”
14. “Never sew with a damaged throat plate as this can cause needle to break.”
15. “Do not use bent needles.”
16. “Do not pull or push fabric while stitching. It may deect the needle causing it to break.”
17. “Switch the sewing machine off (“0”) when making any adjustments in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.”
18. “Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making
any other user servicing adjustments mentioned in the instruction manual.”
19. “To avoid electrical shock never put the machine nor the mains cable or mains plug into water or other liquids.”
20. “The LED lamp maximum power is 0.25w, maximum voltage is DC 5v, if the LED lamp is damaged, you should
not use the product and send it to the manufacture or service agent to repair or replace at once.”
21. “Attention the following to avoid injury:
- Unplug the footcontroller of the appliance when leaving it unattended:
- Unplug the footcontroller of the appliance before carrying out any maintenance.”
“CAUTION
-
“SAVE THESE
INSTRUCTIONS”
“This product is for household use, or equivalent.”
This appliance complies with EEC
Directive 2004/108/EC covering the
electromagnetic compatibility.
DISPOSAL:
This equipment is marked with the recycling
symbol. Do not dispose this product as un-
sorted municipal waste. Collection of such
waste separately for special treatment is
necessary. (European Union only)
Moving parts-To reduce
risk of injury, switch off and unplug before servicing.
Close cover before operating machine.”
Do not use sewing machine under direct sunlight, near
a heat source such as stove, iron, candle or any hot
objects and in the place where temperature is high.
Otherwise temperature inside sewing machine becomes
high and/or vinyl of the power cord may be damaged,
resulting in re or an electric shock.
POLARIZED PLUGS CAUTION (USA
& Canada only)
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to t in a polarized outlet only one way. If
the plug does not t fully in the outlet, reverse the plug. If
it still does not t, contact a qualied electrician to install
the proper outlet. Do not modify the plug in any way.


Produkt Specifikationer

Mærke: Juki
Kategori: Symaskine
Model: HZL-27Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Juki HZL-27Z stil et spørgsmål nedenfor, og andre brugere vil svare dig




Symaskine Juki Manualer

Juki

Juki S161 Manual

27 September 2024
Juki

Juki LU2-4410-B1T-CS Manual

1 September 2024
Juki

Juki LU-2210 Manual

29 August 2024
Juki

Juki AW-3SD Manual

29 August 2024
Juki

Juki DNU-1541-7 Manual

29 August 2024
Juki

Juki TU-273 Manual

29 August 2024
Juki

Juki PLK-J12060R Manual

28 August 2024
Juki

Juki DDL8700A-7 Manual

23 August 2024
Juki

Juki PLK-J12060RH Manual

21 August 2024
Juki

Juki LU2-4652-B1T Manual

21 August 2024

Symaskine Manualer

Nyeste Symaskine Manualer

Hema

Hema 12x27.5x26 Manual

16 November 2024
Brother

Brother CE1155 Manual

11 November 2024
Bernina

Bernina 1080 Manual

15 Oktober 2024
Bernina

Bernina 1090 Manual

15 Oktober 2024
Bernina

Bernina 1130 Manual

15 Oktober 2024
Bernina

Bernina Artista 640 Manual

15 Oktober 2024
Bernina

Bernina aurora 440 Manual

15 Oktober 2024
Bernina

Bernina Activa 125 Manual

15 Oktober 2024
Bernina

Bernina 717 Manual

15 Oktober 2024