Juki PLK-G2516R Manual

Juki Symaskine PLK-G2516R

Læs nedenfor 📖 manual på dansk for Juki PLK-G2516R (96 sider) i kategorien Symaskine. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/96
INDUSTRIAL SEWING MACHINE
MODEL
PLK-G2516R
TECHNICAL MANUAL
SEWING MACHINE HEAD
A181E068P01
(9) Please make sure to t the safety protective equipment (the motor cover or the others) and the
accessory protective equipment (the eye guard) that removed temporarily for installation.
(10) If the table and the steel stand are not original, the table and the steel stand have to be strong
enough to withstand the weight and vibration of the sewing machine.
(11) When tting the caster to the steel stand that are not original, the caster with locking function has
to be strong enough to withstand the weight and vibration of the sewing machine.
SEWING
(1) Please make sure to turn the power switch off before installing or replacing needles.
(2) Please pay attention for the ngers not to be injured by the needle point.
(3) Please make sure to turn power switch off before lubricating.
(4) Please pay attention that oil does not get on your skin or in your eyes as it may cause an
inammation.
(5) Please make sure to keep oil out of the reach of children who may drink oil by mistake.
(6) Please make sure to turn the power switch off before threading a needle.
(7) Before starting the sewing, please make sure the position and the function of the halt switch.
(8) Please do not touch the operating parts during sewing operation.
(9) It is very dangerous to operate the sewing machine without safety guards (eye guards, belt covers,
link covers,nger guards or the others).
Please make sure to operate the sewing machine with safety guards.
(10) Please make sure to turn the power switch o when stopping the sewing machine temporarily.
ADJUSTMENT
(1) Please make sure to turn the power switch off before adjusting the sewing machine.
(2) If the adjustment is required while the power switch on, do not step on the foot switch by mistake.
(3) Please be careful not to be injured by a sharp part such as the needle and the shuttle hook point.
(4) Please make sure to put the safety guards (eye guards, belt guards, link covers, and nger guards
or the others) back on the initial position after the sewing machine adjustment.
(5) Please make sure to lock the caster on the table when tilting the sewing machine.
- - 1
1. STRUCTURE OF THE SEWING MACHINE
PLK-G2516R industrial sewing machine consists of the following main parts.
<1>: Sewing machine head <2>: Main shaft motor <3>: Halt switch <4>: Control box
<5>: Operation panel <6>: Work holder foot switch <7>: Start foot switch <8>:Gas spring
<9>: Steel stand <10>: Thread stand <11>: Work holder pedal (Option)
<1>
<2>
<4>
<5>
<7>
<9>
<8>
<10>
<6>
<11>
<3>


Produkt Specifikationer

Mærke: Juki
Kategori: Symaskine
Model: PLK-G2516R

Har du brug for hjælp?

Hvis du har brug for hjælp til Juki PLK-G2516R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Symaskine Juki Manualer

Juki

Juki LK-1903BN Manual

30 December 2025
Juki

Juki MH-380 Manual

30 December 2025
Juki

Juki MH-382 Manual

30 December 2025
Juki

Juki S161 Manual

27 September 2024
Juki

Juki LU2-4410-B1T-CS Manual

1 September 2024
Juki

Juki LU-2210 Manual

29 August 2024
Juki

Juki AW-3SD Manual

29 August 2024
Juki

Juki DNU-1541-7 Manual

29 August 2024
Juki

Juki TU-273 Manual

29 August 2024
Juki

Juki PLK-J12060R Manual

28 August 2024

Symaskine Manualer

Nyeste Symaskine Manualer