JUNG CD1790DWW Manual

JUNG Bevægelsesdetektor CD1790DWW

Læs nedenfor 📖 manual på dansk for JUNG CD1790DWW (13 sider) i kategorien Bevægelsesdetektor. Denne guide var nyttig for 52 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/13

LB management

LB managementLB management

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPM17360WW

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPM17360AL

Operating instructions

Operating instructionsOperating instructions

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the device or load. In

Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

device and or load.device and or load.

Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-

Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-

pending on the insert used, the load is not electrically isolated from the mains, even when the

pending on the insert used, the load is not electrically isolated from the mains, even when thepending on the insert used, the load is not electrically isolated from the mains, even when the

device is switched off.

device is switched off.device is switched off.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

22 Device components

Device components

Device componentsDevice components

Figure1: Device components

(1) FMinsert

(2) Sensor top

(3) Brightness sensor

(4) Button Bluetooth

Bluetooth

BluetoothBluetooth Ʃ

(5) Sensor window and status LEDs

(6) Decor ring