Jura GIGA X9 Professional Manual

Jura Kaffemaskine GIGA X9 Professional

Læs nedenfor 📖 manual på dansk for Jura GIGA X9 Professional (64 sider) i kategorien Kaffemaskine. Denne guide var nyttig for 55 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/64
GIGA X9 Professional Instructions for Use
JURA Type 678
The Instructions for use has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to
its easy-to-understand style, its thoroughness and coverage of safety
aspects.
KOriginal instructions for use
Before using the machine read the instructions for use.
E
12
1 Preparing and using for the first time
TPress the ‘Quick installation’ button.
‘Time’
TPress the ‘+’ ‘–’ or button to set the hours.
TPress the ‘Save button.
TPress the ‘+’ ‘–’ or button to set the minutes.
TPress the ‘Save button.
‘Saved appears briefly on the display.
‘Date’
TPress the ‘+’ ‘–’ or button to set the day.
TPress the ‘Save button.
TPress the ‘+’ ‘–’ or button to set the month.
TPress the ‘Save button.
TPress the ‘+’ ‘–’ or button to set the year.
TPress the ‘Save button.
‘Saved appears briefly on the display.
‘Press the Rotary Switch., the Rotary Switch lights up.
TPlace a receptacle under the dual spout.
k TPress the Rotary Switch.
‘System is filling., the system fills up with water. The opera-
tion stops automatically. ‘Welcome to JURA’, Machine is
heating., ‘Press the Rotary Switch. appears on the display.
k TPress the Rotary Switch.
‘Machine is rinsing., the machine rinses. The operation
stops automatically. ‘Please select product:’ appears on the
display. Your GIGA is ready for use.
TPress the ‘Standard installation’ button.
‘Time’
TPress the ‘+’ ‘–’ or button to set the hours.
TPress the ‘Save button.
TPress the ‘+’ ‘–’ or button to set the minutes.
TPress the ‘Save button.
‘Saved appears briefly on the display.
‘Date’
TPress the ‘+’ ‘–’ or button to set the day.
TPress the ‘Save button.
TPress the ‘+’ ‘–’ or button to set the month.
TPress the ‘Save button.
Quick installation
Standard installation
16
2 Preparation
2 Preparation
E
While a product is being prepared, you can stop preparation
at any time. To do this, press the Rotary Switch k or the ‘ ’
button.
E
During preparation, you can change the preset amounts (e.g.
amount of milk foam or water) by turning the Rotary Switch g.
E
You can follow the current status of preparation on the display.
E
While the machine is preparing 1 ristretto, 2 ristretti, 1 espresso,
2 espressi, 1 coffee, 2 coffees or a pot of coffee, you can prepare
hot water or steam at the same time. You can activate this
function in programming mode (see Chapter 2 ‘Preparation –
Activating simultaneous preparation’).
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The GIGA provides you with two options for preparing a speciality
coffee, milk or hot water.
UPreparation at the touch of a button: Simply press the cor-
responding preparation button for the product shown on the
display (start screen) that you want.
UPreparation using the product selector (Rotary Selection):
Only some of the products you can prepare are shown on the
start screen. As soon as you turn the Rotary Switch, more
products are displayed in a product selector.
UTurn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
UThe product selector view disappears automatically after
5seconds if no preparation is started.
The two preparation options will now be described in more detail in
the following sections.
Coffee, latte macchiato
etc.– options for
preparation
17
2 Preparation
On the display (start screen), you will see various products, which
you can prepare by simply pressing the corresponding button.
A speciality coffee displayed on the start screen is always prepared
in the same way.
Example:Proceed as follows to prepare one coffee.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the dual spout.
TPress the Coffee’ button.
Preparation starts. ‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Two
speciality coffees can always
be prepared in the same way: Press
the preparation button you want twice within two seconds.
Your GIGA prepares latte macchiato, cappuccino and other speciality
coffees with milk at the touch of a button. There is no need to move
the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:‘Please select product:’ is displayed, milk is connected
to the dual spout.
TPlace a glass under the dual spout.
TPress the ‘Latte macchiato button.
‘Latte macchiato and the various amounts are displayed.
‘Latte macchiato, the preset amounts of milk and milk foam
flow into the glass.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. ‘Please select product:’ appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘MaintenanceCleaning
the milk system’).
Preparation at the touch
of a button
Speciality coffees at the
touch of a button
Two speciality coffees at the
touch of a button
Speciality coffees with milk
at the touch of a button
24
3 Daily operation
3 Daily operation
When the GIGA is switched on, it automatically prompts you to per-
form the rinse operation. Start the rinse operation by pressing the
Rotary Switchk. In programming mode you can change this setting
so that the machine starts the switch-on rinse automatically (see
Chapter 4 Permanent settings in programming mode Mainte-
nance settings’).
Precondition:Your GIGA is switched on at the power switch.
TPlace a receptacle under the dual spout.
Q TPress the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Press the Rotary Switch.’
k TPress the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically. ‘Please select product:’ appears on the
display.
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
TDry the metal contacts on the back of the drip tray.
TRefit the coffee grounds container and the drip tray.
TRinse the water tank with clean water.
TDismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
TDismantle and rinse the professional steam lance (see Chap-
ter 5 ‘Maintenance Dismantling and rinsing the profes-
sional steam lance’).
TWipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
Switching on
Daily maintenance
27
4 Permanent settings in programming mode
Programme item Sub-item Explanation
‘Information (5/5)’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and
view the number of maintenance
programmes performed.
In the programme item ‘Product settings (2/5)’ you can make indi-
vidual settings for all speciality coffees, milk and hot water.
The following settings can be made in ‘Expert mode’:
Product Coffee strength Amount More settings
Ristretto,
espresso,
coffee
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Two ristretti,
two espressi,
two coffees
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Cappuccino,
caffè latte,
espresso
macchiato,
latte macchiato
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Two cappuccini,
two caffè lattes,
two espressi
macchiati,
two latte
macchiati
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Portion of milk
foam,
portion of milk
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Product settings
Expert mode
30
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item Machine settings (3/5)’/ ‘Maintenance set-
tings’ you can make the following settings:
U‘Filter’
UActivate the CLARIS Pro Blue filter cartridge (see Chapter 5
‘Maintenance – Inserting and activating the filter’).
U‘Water hardness
UIf you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U‘Switch-on rinse’/ ‘Manual’
UThe switch-on rinse must be started manually.
U‘Switch-on rinse’/ Automatic’
UThe switch-on rinse is started automatically.
U‘Rinse the milk system’/ ‘Manual after 10min.’
UYou are prompted to rinse the milk system 10minutes after
preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ ‘Manual immediate
UYou are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ Automatic after 10min.’
U Milk system rinsing is automatically initiated 10 minutes
after preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ Automatic immediate’
UMilk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a speciality coffee with milk.
Example:Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a speciality cof-
fee with milk.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
Maintenance settings
35
4 Permanent settings in programming mode
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off time to 15 minutes or
0.5 – 15 hours.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
TPress the ‘Timer’ button.
TPress the ‘Next button.
TPress the ‘Switch off after’ button.
‘Switch off after’
TPress the ‘+’ ‘–’ or button to change the setting.
TPress the ‘Save button.
‘Saved appears briefly on the display.
‘Timer’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’ / ‘Units’ you can
make the following settings:
UUnit for amount of water: ‘ml’
or
‘oz
UTime format: ‘24hrs.’ or AM/ PM’
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
TPress the ‘Units’ button.
‘Units’
TPress the ‘oz button.
Automatic switch-off
Units
48
5 Maintenance
After 220preparations or 80switch-on rinses, the GIGA will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E
The cleaning programme lasts approximately 20 minutes.
E
Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
EJURA cleaning tablets are available from specialised dealers.
Example:Proceed as follows to clean when prompted to do so.
Precondition:‘Clean machine. and the symbol c are displayed.
O T Press the P button.
‘Maintenance status (1/5)’
TPress the ‘Clean’ button.
TPress the Start’ button.
TPress the Start’ button again.
‘Empty coffee grounds container.’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Press the Rotary Switch.’
TPlace a receptacle under the dual spout.
k TPress the Rotary Switch.
‘Machine is being cleaned., water flows out of the dual
spout.
The operation is interrupted, Add cleaning tablet.’.
TOpen the cover of the filler funnel for ground coffee.
TInsert a JURA cleaning tablet into the filler funnel.
TClose the cover of the filler funnel.
‘Press the Rotary Switch.’
k TPress the Rotary Switch.
‘Machine is being cleaned., water flows out of the dual spout
repeatedly.
The operation is interrupted, ‘Empty coffee grounds con-
tainer..
Cleaning the machine
CAUTION


Produkt Specifikationer

Mærke: Jura
Kategori: Kaffemaskine
Model: GIGA X9 Professional

Har du brug for hjælp?

Hvis du har brug for hjælp til Jura GIGA X9 Professional stil et spørgsmål nedenfor, og andre brugere vil svare dig




Kaffemaskine Jura Manualer

Jura

Jura X4 Manual

30 December 2025
Jura

Jura Ono Manual

15 November 2024
Jura

Jura J10 Manual

5 Oktober 2024
Jura

Jura A1 Manual

3 Oktober 2024
Jura

Jura W8 Manual

4 September 2024
Jura

Jura C8 Manual

2 September 2024
Jura

Jura J8 twin Manual

29 August 2024

Kaffemaskine Manualer

Nyeste Kaffemaskine Manualer