Kaona Skippy Manual


Læs gratis den danske manual til Kaona Skippy (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Kaona Skippy, eller vil du spørge andre brugere om produktet?

Side 1/9
1 SKIPPY www.kaona.fr
HOW TO TAME SKIPPY
Skippy is a polyrhythmic linear and logarithmicmatrix and nonmatrix sequencer
that offers four completely independent but synchronized tracks
F
F
F
F PRINCIPLE
Skippy operates either on a realtime time passing calculation nonmatrix
modeor based on a fixed step duration concept like many sequencers matrix
mode Both modes can coexist track by track For example a TILES sequence
is a matrix function where a step has a predetermined value in the sequence and
depending on the algorithm a gate will or will not be generated at each stepOn
the other handwith a Gaussian sequencethe notion of fixed step value disap
pears
Depending on the algorithma new time value will be assigned to each stepallow
ing time progression outside any matrix notion Some functions commonly found
in sequencers as matrices are calculated in real time here based on durationSkip
pys EUCLID functionfor example operates this way
To retain the notion of rhythm and repetition howeverthe always fixed unit in a
sequence is the time it takes Skippy to complete one screen revolution This value
remains repetitive regardless of the number of steps or the chosen algorithmThis
time is determined track by track by the BPM function
2 SKIPPY www.kaona.fr
INTERFACE
Each track is represented by a color that can be found on the four buttons the
four circles on the screen and the four output LEDs
Track  red Track  yellow Track  green Track  blue
A gate is sent to each CV output to at the same time and for the same
duration as the corresponding LED The output voltage is V
The limited edition Pure White version of Skippy has a black and white interface
only
The central encoder button is used to navigate through the functions by turn
ing it left or right When the encoder is pressed brieflythe function name changes
color from white to violet except for the RESET functionwhich is always dis
played in violetPressing the button again exits the function and the function
name changes back from violet to white You can then navigate through the func
tions again
When the function name is in violet turning the encoder will change the values
associated with the selected function AND the illuminated buttonsFor example
if the red button and the blue button are lit selecting the number of steps STEP
functionwill only change the number of steps for tracks and  It is possible to
select or deselect a button even when the function is already selected to adjust the
tracks individually or as a group
Upon startup Skippy advances step by step symbolized by a white dot moving
around the circle of each colorThe startup begins at the bottom and rotates in the
direction determined by WAY
It may happen depending on the manipulationthat Skippy loses track of which
step to use or that the tracks become unsynchronized The RESET function allows
restarting all four tracks simultaneously the input can also be used CV clock in
for this purpose see system functions


Produkt Specifikationer

Mærke: Kaona
Kategori: Ikke kategoriseret
Model: Skippy

Har du brug for hjælp?

Hvis du har brug for hjælp til Kaona Skippy stil et spørgsmål nedenfor, og andre brugere vil svare dig