Kenwood DNX577S Manual
Læs nedenfor 📖 manual på dansk for Kenwood DNX577S (132 sider) i kategorien Navigator. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/132
IM402_ref_K_En_10 (K)© 2020 JVCKENWOOD Corporation
DNX997XR
DNX697S
DNX577S
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or
service on the product.
Model DNX997XR DNX697S DNX577S / / Serial number
US Residence Only
Register Online
Register your KENWOOD product at www.kenwood.com/usa/
• Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from
<https://www.kenwood.com/cs/ce/>.
• The Instruction manual is subject to change for modification of
specifications and so forth. Be sure to download the latest edition of the
Instruction manual for reference.
<http://manual.kenwood.com/edition/im402/>
2
Important Notice on Software
Ñ Software License on This
Product
The software embedded in this product
comprises a number of independent software
components, each of which is copyrighted by
JVCKENWOOD Corporation or by a third party.
This product uses software components that
are based on an End-User License Agreement
(hereinafter called “EULA”) stipulated by
JVCKENWOOD Corporation and by third parties.
The EULA dictates the availability of the source
codes of free-software components as a
prerequisite to distributing them in executable
form under the terms of the GNU General
Public License or the Lesser General Public
License (hereinafter called “GPL/LGPL”). To get
information about the software components
that are subject to the terms of the GPL/LGPL,
please visit the following Website:
Website URL https://www2.jvckenwood.com/gpl/
Queries concerning the contents of the source
code or the like will not be accepted.
Please note that software components based
on a EULA that is not subject to the terms of the
GPL/LGPL or those that have been developed
or created by JVCKENWOOD Corporation will
be excluded from the scope of source code
disclosure.
Because licenses to use software components
distributed under the GPL/LGPL are offered to
the customers for free of charge, no warranty is
granted to the customers, whether explicitly or
implicitly, to the extent of the applicable laws.
Unless otherwise stipulated by the applicable
laws or agreed upon in writing, the copyright
holders or those who are entitled to modify
and redistribute the software components are
not held responsible for any and all damages
resulting from their use or from inability to use
them. For more information about the terms of
use of the software components, required items
of compliance and so on, please refer to the
GPL/LGPL.
Customers wishing themselves to use a software
component that is subject to the GPL/LGPL
embedded in this product are encouraged to
read the terms of the corresponding license
before use. Because each individual license
is prescribed by a third party other than
JVCKENWOOD Corporation, the original (English)
of the license is presented.
EULA
Ñ Software License Agreement
JVCKENWOOD Corporation (hereinafter called
“Licensor”) holds either the copyright to the
embedded software or the right to sublicense it.
This agreement establishes the conditions under
which the customer uses this “Licensed Software.”
The customer shall agree to the terms of this
license agreement before proceeding to use
Licensed Software.
This agreement is deemed to have taken effect
when the customer (hereinafter called “User”)
has used a product implementation of Licensed
Software.
The Licensed Software may contain software
Licensor has been licensed to use by third parties
directly or indirectly. Some third parties may
have terms of use prescribed for their customers,
apart from this Software License Agreement. This
agreement does not apply to such software. Be
sure to consult “Important Notice on Software” as
presented separately.
Article 1 (General)
Licensor grants to User a non-exclusive, non-
assignable right of use Licensed Software
within the country where the User purchases
the Product (hereinafter the "Country") (except
for the exception provided for in Paragraph 1,
Article 3).
Article 2 (Right of Use)
1. The rise of use granted under this agreement
is the right to use Licensed Software in this
product.
2. User may not duplicate, copy, modify, add to,
translate or otherwise alter, or loan licensed
Software and the associated literature in
whole or in part.
3. Use of Licensed Software is limited to a private
extent , and Licensed Software may not be
distributed, licensed or sublicensed for any
purposes whatsoever, including commercial
use.
4. User shall use Licensed Software as per the
instruction manual or instructions given in the
help file and may not use or duplicate data in
violations of the regulations of the Copyright
Law or other governing laws by using
Licensed Software in whole or in part.
3
Article 3 (Terms of License)
1. In assigning this product, User may not retain
the original copy of the embedded Licensed
Software (including associated literature,
updates and upgrades) and any duplicates
and associated literature with regard to
the license to use Licensed Software. User
may transfer Licensed Software only to the
condition of binding the assignee to abide by
the terms of this Software License Agreement.
2. User may not reverse-engineer, disassemble,
decompile or otherwise analyze the source
code of Licensed Software.
Article 4 (Rights to Licensed Software)
All rights to Licensed Software and the
associated literature, including copyrights, shall
reside with Licensor or
the original right holder who has granted the
Right of Use and right to sublicense to Licensor
(hereinafter referred to as “Original Right
Holder”), and User does not have any rights
other than Right of Use granted hereunder
with regard to Licensed Software and the
associated literature.
Article 5 (Exemption Granted to Licensor)
1. Licensor and Original Right Holder do not
assume any responsibility for damages
caused to User or third parties resulting from
the exercise by User of the license granted
hereunder, unless otherwise provided by any
law to the contrary.
2. Licensor does not warrant Licensed Software
to be merchantable, compatible and fit for
specific purposes.
Article 6 (Responsibility for Third Parties)
If disputes over the infringement of third
parties’ intellectual property rights, such as
copyrights and patent rights, arise out of the
use of Licensed Software by User, User shall
resolve these disputes at User’s own expenses
while keep Licensor and Original Right Holder
harmless.
Article 7 (Secrecy Obligation)
User shall keep confidential Licensed Software
provided hereunder, information contained in
the associated literature or the like and those
provisions of this agreement not yet in public
knowledge and may not disclose or leak these
to third parties without prior written consent
from Licensor.
Article 8 (Cancellation of the Agreement)
Licensor reserves the right to cancel this
agreement forthwith and claim compensation
from User for the damages caused by such
cancellation when User:
(1) Breaches any of the provisions of this
agreement, or
(2) Has received a petition for seizure, provisional
seizure, provisional disposition or any other
kind of compulsory execution.
Article 9 (Destruction of Licensed Software)
If this agreement is terminated under the
provision of the foregoing paragraph, User
shall destroy Licensed Software, along with all
associated literature and its duplicates, within
two (2) weeks from the date of termination.
Article 10 (Copyright Protection)
1. Copyrights and all other intellectual property
rights relating to Licensed Software shall
reside with Licensor and Original Right Holder
and in no circumstances with User.
2. User shall abide by the laws relating to
copyrights and intellectual property rights in
using Licensed Software.
Article 11 (Export Control)
1. Licensed Software and the associated
literature or the like may not be exported
to places outside the Country (including
transmission outside the Country over the
Internet or the like).
2. User agrees that Licensed Software is subject
to export controls imposed by the Country
and the United States of America.
3. User agrees to comply with all the
international and domestic laws that apply
to this software (U.S. Export Administration
Regulations and regulations established by
the U.S., the Country and their governmental
agencies regarding usage by end users and
export destinations).
Article 12 (Miscellaneous)
1. Even if this agreement is invalidated in part by
law, all other provisions shall remain in effect.
2. Licensor and User shall consult each other in
good faith to resolve any matters not provided
for in this agreement or questions arising from
the interpretation of this agreement.
3. Licensor and User agree that this agreement
is governed by the law of Japan and that all
disputes involving claims and obligations that
may arise out of this agreement will be settled
by arbitration at the Tokyo District Court as the
court of first instance.
5English
SiriusXM® 60
SiriusXM® Basic Operation 60 ....................................
Storing Channels in Preset Memory 62 ..................
Preset select 62 ...............................................................
Direct search 62 ..............................................................
Category/Channel search 63 ......................................
Replay 63 ...........................................................................
TuneMix™ 64 ....................................................................
SmartFavorites, TuneStart™ ..................................64
TuneScan™ 64 ..................................................................
Traffic & Weather Now™ 65 .........................................
Content Alerts............................................................65
SportsFlash™ 66 ..............................................................
SiriusXM SETUP 66 .........................................................
Bluetooth Control 72
Information for using Bluetooth® devices 72 .......
Register the Bluetooth device 73 .............................
Bluetooth Setup 74 ........................................................
Playing the Bluetooth Audio Device 76 .................
Using the Hands-Free Unit 78 ....................................
Hands-Free Setup 82 .....................................................
Other External Components 84
View Camera 84 ..............................................................
Use Dashboard Camera..........................................86
External audio/video players (AV-IN).................87
OEM Features Operation 88 .......................................
Setup 89
Monitor Screen Setup 89 .............................................
System Setup 89 .............................................................
User Interface Setup 90 ................................................
Special Setup 91 .............................................................
Display Setup 92 .............................................................
AV Setup 94 ......................................................................
Controlling Audio 95
3-way speaker system setup 95 ................................
Speaker / X’over setup 96 ............................................
Controlling General Audio 98 ....................................
Equalizer Control 98 ......................................................
Volume Offset 99 ............................................................
Zone Control 100 ...........................................................
Sound Effect 100 ............................................................
Listening Position / DTA 101 ......................................
Audio Setup memory 103 ..........................................
Remote control 104
Battery Installation 104 ................................................
Functions of the Remote control Buttons 104 ....
Connection/Installation 107
Before Installation 107 .................................................
Installing the unit 109 ..................................................
Troubleshooting 118
Problems and Solutions 118 ......................................
Error Messages 119 .......................................................
Appendix 121
Playable Media and Files..................................... 121
Region Codes in the World 123 ................................
DVD Language Codes 124 ..........................................
Specifications 125 ..........................................................
About this Unit 129 .......................................................
Before Use
6
Before Use
Precautions
# WARNINGS
Ñ To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metallic
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any extended
period.
• If you experience problems during installation,
consult your KENWOOD dealer.
Ñ Precautions on using this unit
• When you purchase optional accessories,
check with your KENWOOD dealer to make
sure that they work with your model and in
your area.
• You can select a language to display menus,
audio file tags, etc. See User Interface Setup
(P.90).
• The Radio Data System or Radio Broadcast
Data System feature won’t work in areas
where the service is not supported by any
broadcasting station.
Ñ Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with a sharp tip.
Ñ Cleaning the unit
• If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe it with
a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
NOTE
• Applying spray cleaner directly to the unit
may damage its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch the
surface or erase the screened print.
Ñ Lens fogging
When you turn on the car heater in cold
weather, dew may form on the lens in the
disc player of the unit due to condensation.
This condensation on the lens (also called lens
fogging) may not allow discs to play. In such a
situation, remove the disc and wait for the dew
to evaporate. If the unit still does not operate
normally after a while, consult your KENWOOD
dealer.
Ñ Precautions on handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use disc type accessories.
• Clean the disc from the center toward the
outside rim.
• When removing a disc from this unit, pull it out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with
a ballpoint pen etc.
• Discs that are not round cannot be used.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the following types of
CDs.
• This unit may not correctly play discs which do
not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process, see
your writing software and your recorder's
instruction manual.)
Before Use
7English
Ñ Acquiring GPS signal
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up
to several minutes. Make sure your vehicle
is outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.
Ñ About GLONASS
This unit uses Global Navigation Satellite System
(GLONASS) in addition to GPS.
Combining GPS and GLONASS can refine
positioning accuracy than using GPS only.
Ñ Caution for Smartphone Users
Simultaneously running multiple applications
on your smartphone while screen sharing places
heavy demand on the microprocessor of the
phone, potentially affecting communication and
performance.
For best results while pairing with your Kenwood
receiver, please be sure to close any unused
applications.
Safety Precautions and
Important Information
Read this information carefully before starting to
operate the KENWOOD Car Navigation System
and follow the instructions in this manual.
Neither KENWOOD nor Garmin shall be liable for
problems or accidents resulting from failure to
observe the instructions in this manual.
# WARNING
Failure to avoid the following potentially
hazardous situations could result in an
accident or collision resulting in death or
serious injury.
When navigating, carefully compare information
displayed on the navigation system to all
available navigation sources, including
information from street signs, visual sightings,
and maps. For safety, always resolve any
discrepancies or questions before continuing
navigation.
Always operate the vehicle in a safe manner.
Do not become distracted by the navigation
system while driving, and always be fully aware
of all driving conditions. Minimize the amount of
time spent viewing the screen of the navigation
system while driving, and use voice prompts
when possible.
Do not enter destinations, change settings, or
access any functions requiring prolonged use
of the navigation system controls while driving.
Stop your vehicle in a safe and legal manner
before attempting such operations.
Keep the system volume at a low enough level
to be able to hear outside noises while driving.
If you can no longer hear outside noises, you
may be unable to react adequately to the traffic
situation. This may cause accidents.
The navigation system will not display the
correct current position of the vehicle the first
time it is used after purchase, or if the vehicle
battery is disconnected. GPS satellite signals
will soon be received, however, and the correct
position will be displayed.
Be careful of the ambient temperature. Using the
navigation system at extreme temperatures can
lead to malfunction or damage. Also note that
the unit can be damaged by strong vibration,
by metal objects, or by water getting inside the
unit.
Before Use
8
# CAUTION
Failure to avoid the following potentially
hazardous situations may result in injury or
property damage.
The navigation system is designed to provide
you with route suggestions. It does not reflect
road closures or road conditions, weather
conditions, or other factors that may affect safety
or timing while driving.
Use the navigation system only as a navigational
aid. Do not attempt to use the navigation system
for any purpose requiring precise measurement
of direction, distance, location, or topography.
The Global Positioning System (GPS) is operated
by the United States government, which is solely
responsible for its accuracy and maintenance.
The government system is subject to changes
that could affect the accuracy and performance
of all GPS equipment, including the navigation
system. Although the navigation system is a
precision navigation device, any navigation
device can be misused or misinterpreted and,
therefore, become unsafe.
Ñ IMPORTANT INFORMATION
Vehicle Battery Preservation
This navigation system can be used when the
ignition key is turned to ON or ACC. To preserve
the battery, however, it should be used with
the engine running whenever possible. Using
the navigation system for a long time with the
engine switched off can cause the battery to run
down.
Map Data Information
One of the goals of Garmin is to provide
customers with the most complete and
accurate cartography that is available to us at
a reasonable cost. We use a combination of
governmental and private data sources, which
we identify in product literature and copyright
messages displayed to the consumer. Virtually
all data sources contain some inaccurate or
incomplete data. In some countries, complete
and accurate map information is either not
available or is prohibitively expensive.
How to read this manual
• The screens and panels shown in this manual are
examples used to provide a clear explanation of
operations.
For this reason, they may be different from the actual
screens or panels, or some display patterns may be
different from the actual ones.
• : English is used for the purpose Display language
of explanation. You can select a display language
from the menu. See [ ]SETUP User Interface Setup
(P.90).
Basic Operations
9English
Basic Operations
Functions of the Buttons on the Front Panel
DNX997XR
9
8
1 2 3 4 5 6 7
DNX697S / DNX577S
4
2
3
5
6
10 18
Basic Operations
10
NOTE
• The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason,
they may be different from the actual panels.
Number Name Motion
1
Remote
Sensor
• Receives the remote control signal.
2
S R,
(Volume)
• Adjusts the volume.
The volume will go up to 15 when you keep pressing . R(P.13)
3
NAV/[ ] • Displays the navigation screen.
• Pressing and holding switches view camera display on/off.
The camera whose view is displayed first changes according to the "Camera Setup"
setting and the shift lever position in the shift gate. The camera whose view was
displayed last is kept and the same camera view will be displayed the next time. If its
assignment setting is changed, the rear camera view is displayed.
4
HOME/[ ] • Displays the HOME screen .(P.15)
• Pressing for 1 second turns the power off.
• When the power is off, turns the power on.
5
MENU/[ ] • Displays the popup menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.
6
• Displays the APP (Apple CarPlay/Android Auto/Wireless Mirroring) screen.
• Pressing and holding displays the Voice Recognition screen .(P.80)
• When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is
connected, pressing and holding displays Bluetooth pairing waiting dialog. (P.73)
7
G• Displays the Angle Adjust screen.
– : Ejects the disc.[ ]DISC EJECT
– : Fully opens the panel to the location of the SD card slot.[ ]OPEN
• When the panel is opened, closes the panel.
• To forcibly eject the disc, press it for 2 seconds and then touch after the [ ]DISC EJECT
message is displayed.
(DNX997XR only)
8
Disc insert
slot
• A slot to insert a disc media.
9
SD card slot • A slot to insert an SD card.
• You can play audio/visual files in the card. *1
• An SD card slot for upgrading the map. For how to upgrade the map, refer to the
instruction manual of the navigation system. *2
*1 If the map update file remains in the SD card, you cannot play audio/visual files.
*2 The system of the unit is rebooted after inserting/removing the MAP SD.
(DNX997XR only)
10
microSD
card slot
• A slot to insert a microSD card.
• You can play audio/visual files in the card. *1
• A microSD card slot for upgrading the map. For how to upgrade the map, refer to the
instruction manual of the navigation system. *2
*1 If the map update file remains in the microSD card, you cannot play audio/visual
files.
*2 The system of the unit is rebooted after inserting/removing the MAP SD.
(DNX697S / DNX577S only)
Basic Operations
11English
Turning on the Unit
The method of turning on is different depending on the model.
1
Press the / button.[ ]HOME [ ]
DNX997XR
DNX697S / DNX577S
The unit is turned on.
●To turn off the unit:
1
Press the / button for 1 second.[ ]HOME [ ]
NOTE
• If it is your first time to turn the unit on after installation, it will be necessary to perform Initial SETUP .(P.12)
Basic Operations
12
Initial Settings
Initial SETUP
Perform this setup when you use this unit first
time.
1
Set each item as follows.
■[ ]Locale
Select the country for the navigation system.
The language, the distance unit, and the
gasoline unit are set.
1 Touch [ ]Locale .
2 Select the desired country.
■[ ]Language
Select the language used for the control
screen and setting items. Default is “American
English(en)”.
1 Touch [ ]Language .
2 Touch [ ]Language Select .
3 Select the desired language.
4 Touch [].
For details, see User Interface Setup
(P.90).
■[ ]Display
Set the key illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [ ]Display .
2 Touch [Key Color].
3 Select the desired color.
4 Touch [].
(DNX997XR only)
5 Touch [Display Adjustment].
6 Adjust a viewing angle and a tilt position.
7 Touch [].
For details, see Display Adjustment
(P.14).
(DNX697S / DNX577S only)
5 Touch [Viewing Angle].
6 Select a viewing angle.
7 Touch [].
For details, see Viewing Angle (P.14).
For details, see Display Setup (P.92).
■[ ]Camera
Set the parameters for the camera.
1 Touch [ ]Camera .
2 Set each item and touch [].
For details, see Camera Setup (P.84).
■[ ]OEM SETUP
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■[ ]DEMO
Set the demonstration mode. Default is “ON”.
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.89).
Basic Operations
14
Display Adjustment
(DNX997XR)
1
Press the button.[ ]G
Display Adjustment screen appears.
1 2
3
1
Viewing Angle
You can adjust the viewing angle when the
image on the screen is difficult to see evenly.
The smaller the (negative) value, the more
whitish the image on the screen looks. "0"
(Default)/"-1"/"-2"/"-3"
2
Angle Adjustment
Select a tilt position you want to set up. Default
is "0".
3
Off Position
You can store the current monitor angle as the
angle during power off. Touch when [ ]Memory
the desired angle is selected.
Viewing Angle
(DNX697S / DNX577S)
You can adjust the viewing angle when the
image on the screen is difficult to see evenly.
The smaller the (negative) value, the more
whitish the image on the screen looks.
1
Press the button.[ ]
Popup menu appears.
2
Touch [ ]SETUP .
3
Touch [ ]Display .
Display screen appears.
4
Touch [Viewing Angle].
5
Select an angle you want to set up.
Default is "0". (P.92)
Basic Operations
15English
Touch screen operations
To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to
select an item, display a setting menu screen
or change pages.
●Touch
Touch the screen gently to
select an item on the screen.
●Touch and hold
Touch the screen and keep
your finger in place until
the display changes or a
message is displayed.
●Flick
Slide your finger quickly
to the left or right on the
screen to change the page.
You can scroll a list screen
by flicking up/down on the
screen.
●Swipe
Slide your finger up or down
on the screen to scroll the
screen.
HOME screen descriptions
Most functions can be performed from the
HOME screen.
1
3
2
1
• Widget (P.25)
– You can change the widget by flicking left
or right on the widget area.
– Touch the widget to display the detailed
screen.
2
• Displays the source selection screen. (P.17)
3
• Short-cut playback source icons (P.17)
Display the HOME screen
1
Press the / button.[ ]HOME [ ]
DNX997XR
DNX697S / DNX577S
HOME screen appears.
Basic Operations
16
Popup menu
1
Press the / button.[ ]MENU [ ]
Popup menu appears.
2
Touch to display the popup menu.
DNX997XR
1
DNX697S / DNX577S
1
The contents of the menu are as follows.
• Displays the Screen Adjustment screen.
(P.89)
• Turns the display off. (P.16)
• Displays the view camera screen.
(P.84)
• Displays the SETUP Menu screen.
(P.89)
• Displays the Audio screen. (P.95)
• Displays the control screen of current
source. Icon feature differs depending on
the source. This icon is for USB source.
• Close the popup menu.
DNX997XR only
• Touch to eject the disc.
• Touch for 2 seconds to forcibly eject
the disc and then touch after the [ ]Yes
message is displayed.
DNX697S / DNX577S only
• Displays the Android Auto device list. This
icon appears only when Android Auto is
connected and two or more devices can
be used as Android Auto source.
DNX997XR / DNX697S only
1
• Short-cut source icons: The source
changes to the one you have set with a
short-cut. For the short-cut setting, refer
to Customize Short-cut source icons on
HOME screen (P.18).
Turn off the screen
1
Select [ ]Display OFF on the popup menu.
NOTE
• Touch the display to turn on the screen.
• To display the clock while the screen is off, it is
necessary to set "OSD Clock" to "ON". (P.92)
Source selection screen
description
You can display icons of all playback sources
and options on the source selection screen.
4 5
321
1
• Changes playback sources.
For playback sources, see Select the
playback source (P.17).
2
• Page indication
3
• Changes pages. (Touch / .)[] [ ]
You can also change pages by flicking left or
right on the screen.
4
• Returns to the previous screen.
5
• Displays the SETUP Menu screen. (P.89)
Basic Operations
17English
Select the playback source
1
Press the / button.[ ]HOME [ ]
HOME screen appears.
2
Touch [ ].
From the screen, you can select the
following sources and functions.
• Displays the navigation screen. (P.20)
• Switches to the Apple CarPlay screen
from the connected iPhone. (P.38)
• Switches to the Android Auto
screen from the connected Android
smartphone. (P.41)
• Displays the Hands Free screen. (P.78)
When neither Apple CarPlay, Android
Auto, nor a Bluetooth Hands-Free phone
is connected, displays Bluetooth pairing
waiting dialog.*1 (P.73)
• Switches to the Radio broadcast.
(P.51)
DNX577S only
• Switches to the HD Radio broadcast.
(P.54)
DNX997XR / DNX697S only
• Switches to the SiriusXM® satellite radio
broadcast. (P.60)
• Plays a Bluetooth audio player. (P.76)
• Plays a disc. (P.29)
• Plays an iPod/iPhone. (P.48)
• Plays files on a USB device. (P.44)
• Plays files on an SD card. (P.44)
• Switches to an external component
connected to the AV-IN input terminal.*2
(P.87)
• Switches to the Wireless Mirroring
screen from the connected Android
smartphone. (P.36)
DNX997XR only
• Switches to the USB Mirroring screen
from the connected iPhone/Android
smartphone. (P.36)
• Displays the Audio screen. (P.95)
• Puts the unit in standby. (P.18)
• For sources and information displayed when an ADS
adapter is connected, see OEM Features Operation
(P.88).
*1 When connecting as Apple CarPlay or Android Auto,
it works as a phone provided in Apple CarPlay or
Android Auto. If Apple CarPlay or Android Auto are
connected during talking by the Bluetooth device or
iDataLink phone, the current call will be continued.
*2 CA-C3AV (optional accessory) is connected to the
AV-IN input terminal for visual. (P.113)
To select the playback source on the
HOME screen
The 4 items displayed on the source selection
screen with large icons are shown on the
HOME screen.
You can change the items displayed on this
area by customizing the source selection
screen. (P.18)
Basic Operations
18
To select the playback source on the
source control screen
Display source selection icons by touching [ ] [/
] or flicking left or right on the source control
screen, then select a playback source.
Put the unit in standby
1
Press the / button.[ ]HOME [ ]
HOME screen appears.
2
Touch [ ].
3
Touch [STANDBY].
Customize Short-cut source icons
on HOME screen
You can arrange the positions of the source
icons as you like.
1
Press the / button.[ ]HOME [ ]
HOME screen appears.
2
Touch [ ].
3
Touch and hold the icon which you want
to move in the customizing mode.
4
Drag the icon to the desired position.
Changes the page
Basic Operations
19English
Source control screen
descriptions
There are some functions which can be
performed from most screens.
Indicators
5
6
1 2
3
4
7
Navigation information
Short-cut source icons
1
All sources icon
Displays the source selection screen. (P.16)
2
Secondary screen
• [ ] [ ]/ : The Secondary screen changes to
another one every time you touch it. You can
also change the Secondary screen by flicking
left or right on the screen.
• Indicators: Displays the current source
condition and so on.
– : The attenuator is active.[ ]ATT
– : The dual zone function is active.[ ]DUAL
– : The mute function is active.[ ]MUTE
– [LOUD]: The loudness control function is active.
• Navigation information: Displays the current
location and the direction. The screen changes
to the navigation screen when you touch here.
• Short-cut source icons: The source changes to
the one you have set with a short-cut. For the
short-cut setting, refer to Customize Short-
cut source icons on HOME screen (P.18).
3
Content list
Displays the track/file/station/channel list.
4
• Connected Bluetooth device information.
5
Artwork & information
You can select whether to display an artwork
and song information or only song information
in more detail.
Touching the artwork area switches to the VU
meter. (The Disc, USB, SD, iPod, Bluetooth audio
sources only)
Change the text size of song information smaller
when the "Small Audio Text" is set to "ON" in the
User Interface screen .(P.90)
6
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
7
Operation keys
You can operate the current source with these
operation keys. The available functions are
different depending on the source type.
Basic Operations
20
List screen
There are some common function keys in the
list screens of most sources.
See .(P.33, 47, 49, 77)
Display the list screen
For Disc media/ USB/ SD/ iPod:
1
Touch [ ]1 or the item listed on the
information area in the source control
screen.
The list screen appears.
For Bluetooth audio:
1
Touch [ ]1.
The list screen appears.
You can use following operation keys from this
screen.
61 2
3 4 5
1
Displays the list type selection window.
2
Displays a music/movie file list.
3
Text scroll
Scrolls the displayed text.
4
etc.
Keys with various functions are displayed here.
• : Plays all tracks in the folder containing
the current track.
• : Jumps to the letter you entered
(alphabetical search).
• : Moves to the upper hierarchy
level.
5
/ / / Page scroll[ ] [ ] [ ] [ ]
You can change pages to display more items by
touching [ ] [ ]/ .
• [ ] [ ]/ : Displays the top or bottom page.
6
Return
Returns to the previous screen.
NOTE
• Depending on the current source or mode, some
function key may not appear.
Navigation Operation
For details on the navigation function, please
refer to the Navigation Instruction Manual.
Display the navigation screen
1
Press the / button.[ ]NAV [ ]
DNX997XR
DNX697S / DNX577S
The navigation screen appears.
2
Touch [ ].
Main Menu screen appears.
Basic Operations
21English
How to Use the Navigation System
1
Operate the desired function from the
Main Menu screen.
5
123
4
1
GPS and GLONASS signal status.
2
Finds a destination.
3
Views the map.
4
Uses the Apps such as ecoRoute and Help.
5
Adjusts the settings.
NOTE
• GLONASS reception is not available on all
device models.
• You can get additional information about
using the navigation system from Help. To
display Help, touch [Apps] and then touch
[ ]Help .
NOTE
• For more information about your navigation
system, download the latest version of
the Owner’s Manual from http://manual.
kenwood.com/edition/im402/
2
Enter your destination and start the
guidance.
Finding points of interest
1 Touch [Where To?].
2 Select a category and a subcategory.
3 Select a destination.
4 Touch [ ]Go! .
NOTE
• To enter letters contained in the name, touch
the Search bar and enter the letters.
3
Follow your route to the destination.
NOTE
• The speed limit icon feature is for information
only and does not replace the driver’s
responsibility to abide by all posted speed
limit signs and to use safe driving judgment
at all times. Garmin and JVCKENWOOD will
not be responsible for any traffic fines or
citations that you may receive for failing to
follow all applicable traffic laws and signs.
Your route is marked with a magenta
line. As you travel, your navigation
system guides you to your destination
with voice prompts, arrows on the map,
and directions at the top of the map. If
you depart from the original route, your
navigation system recalculates the route.
5
6 8 9
1
2
3
4
7
1
Views the Next Turn page or the junction
view page, when available.
2
Views the Turn List page.
3
Views the Where Am I? page.
4
Stops the currents route.
5
Displays traffic information on the route.
6
Returns to the Main menu.
7
Data field. Touch to display a different data
field.
8
Vehicle speed. Touch to display a trip
information.
9
Displays more options.
Basic Operations
22
NOTE
• Touch and drag the map to view a different
area of the map.
• A speed limit icon could appear as you travel
on major roadways.
●Adding a stop
1 While navigating a route, touch [ ] and
then touch [Where To?].
2 Search for the extra stop.
3 Touch [ ]Go! .
4 Touch [ ]Add to Active Route to add this
stop before your final destination.
●Taking a detour
1 While navigating a route, touch [ ].
2 Touch [ ].
■Manually avoiding traffic on your route
1 From the map, touch .[ ]
2 Touch [Traffic On Route].
3 If necessary, touch the arrows to view
other traffic delays on your route.
4 Touch [ Avoid] [ > ].
■Viewing the traffic map
The traffic map shows color-coded traffic
flow and delays on nearby.
1 From the map, touch [ ].
2 Touch [Traffic Conditions].
■About traffic
• Traffic service is not available in some areas or
countries.
• Garmin and JVCKENWOOD are not responsible
for the accuracy or timeliness of the traffic
information.
• You can receive INRIX traffic information and
weather forecast by connecting your iPhone or
Android smartphone in which the “KENWOOD
Traffic Powered By INRIX” application is
installed.
For details, see “KENWOOD Traffic Powered By
INRIX” application.
■Updating maps
You can purchase updated map data from
Garmin.
1 Go to https://kenwood.garmin.com/
kenwood/site.
2 From the Map Updates section, select
Update
3 Follow the on-screen instructions.
Control audio from the navigation
screen
You can control audio sources while the
navigation screen is displayed.
Also, you can view the navigation information
while the source control screen is displayed.
(P.19)
1
While playing the audio, touch /[ ] [
] [ ]/ in the navigation screen.
Each time you touch the icon, the screen
switches as follows.
Displays the navigation and control keys of
the current source.
Displays the navigation and current video
playback display.
Basic Operations
23English
Displays the navigation and view camera
display.
Returns to the full navigation screen.
NOTE
• For details on control keys, refer to the
instructions in each section.
• Touching the source icon at the bottom of the
screen displays the full audio screen. During
video playback, touching the viewing area
displays operation keys.
• During camera view display, touching the
viewing area switches to the view cameras set in
the camera assignment settings. (P.85)
Navigation Setup
1
Press the / button.[ ]MENU [ ]
Popup menu appears.
2
Touch [ ]SETUP .
SETUP Menu screen appears.
3
Touch [ ]Navigation .
Navigation Setup screen appears.
4
Set each item as follows.
■[NAV Mute] (2-way speaker system
only)
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is “ON”.
■[NAV Interrupt Speaker]
Selects speakers used for voice guidance of
the navigation system.
• : Uses the front left side speaker for [ ]Front L
voice guidance.
• : Uses the front right side speaker [ ]Front R
for voice guidance.
• (Default): Uses both front [ ]Front All
speakers for voice guidance.
■[NAV Voice Volume]
Adjusts the volume for voice guidance of the
navigation system. Default is “24”.
Basic Operations
24
KENWOOD Traffic Powered By INRIX
You can receive INRIX traffic information and
weather forecast by connecting your iPhone or
Android smartphone in which the “KENWOOD
Traffic Powered By INRIX” application is
installed to this unit.
Preparation
• Install the latest version of the KENWOOD Traffic
Powered By INRIX application on your iPhone or
Android smartphone.
– iPhone: Search for "KENWOOD Traffic Powered
By INRIX" in the Apple App Store to find and
install the most current version.
– Android: Search for "KENWOOD Traffic Powered
By INRIX" in Google play to find and install the
most current version.
• For details, see “KENWOOD Traffic Powered By
INRIX” application.
1
Connect the device.
• To connect a device via Bluetooth,
register it as the Bluetooth device and
do the App (SPP) profile setting of the
connection beforehand. See Register the
Bluetooth device (P.73) Connect and
the Bluetooth device (P.74).
• Connect an iPhone using KCA-iP103 via
the USB (Black) terminal. (P.115)
NOTE
• When an Apple CarPlay is connected, you
can receive INRIX traffic information and
weather forecast.
2
Press the / button.[ ]NAV [ ]
DNX997XR
DNX697S / DNX577S
The navigation screen appears.
3
Touch [ ].
Main Menu screen appears.
Touch on the Main Menu screen [ ]Apps
and then an icon of your desired content.
For details, see Navigation system manual.
Widget
25English
Widget
Widget
1 Press the / button.[ ]HOME [ ]
2 You can change the widget by flicking left
or right on the widget area.
Widget list
• Weather Widget *
1
• Multi Widget *
2
• Clock Widget
• Tire Pressure Widget *
3
• Rader Widget *
3
• Climate Widget *
3
• Photo Frame Widget
*1 You can receive INRIX traffic information and weather
forecast by connecting your iPhone or Android
smartphone in which the “KENWOOD Traffic Powered
By INRIX” application is installed.
*2 Up to 3 pages can be set to the multi widget screen.
*3 This can be selected when a compatible ADS adapter
is connected.
Multi Widget
You can place a widget on each of the
following areas. Up to 4 widgets can be placed
per a multi widget screen.
1 Press the / button.[ ]HOME [ ]
2 Flick the widget area to the left/right to
display the multi widget.
1
2
3
4
1
Widget (L)
2
Widget (M)
3
Widget (S1)
4
Widget (S2)
Ñ Replace the widget
● To move the widget
1 Touch and hold the widget.
Widget customize mode is activated.
2 Drag the widget to the desired position.
● To delete the widget
1 Touch and hold the widget.
Widget customize mode is activated.
2 Touch on the right top corner of the [ ]×
widget.
The selected widget is deleted.
Widget
26
● To replace the widget
1 Touch on the multi widget screen.[ ]
1
Widget list popup appears.
1
Widget icon
The widgets which can be placed to the multi
widget screen are listed.
2 Flick the widget list popup to the left/
right to select the widget to replace.
3 Touch and hold the new widget.
Widget customize mode is activated.
4 Drag the widget from the widget list
popup to the desired widget area.
You can set up following items.
• Clock Widget
• Weather Widget *
1
• NAV Widget
• Compass Widget *
2
• Current source information *
3
• Visualizer Widget
• Mirroring Widget *
4 *
5
• Photo Frame Widget
• Climate Widget *
6
• Radar Widget *
6
• Tire Pressure Widget *
6
*1 You can receive INRIX traffic information and weather
forecast by connecting your iPhone or Android
smartphone in which the “KENWOOD Traffic Powered
By INRIX” application is installed.
*2 The Turn by Turn function is displayed during the
guidance of the navigation system.
*3 You cannot display the screen of Wireless Mirroring
(DNX997XR only)/USB Mirroring on this widget. To
display the screen of the source, select the Mirroring
Widget.
*4 This can be selected when using Wireless Mirroring
(DNX997XR only)/USB Mirroring.
*5 You cannot play the video file on the USB/SD/Disc
media when using Wireless Mirroring (DNX997XR
only)/USB Mirroring.
*6 This can be selected when a compatible ADS adapter
is connected.
NOTE
• and the widget list popup disappear when no [ ]
operation is done for 5 seconds.
• When the screen is switched from another widget
to multi widget screen, [ ] appears again.
Ñ Add a new multi widget
You can add pages to the multi widget screen.
1 Touch on the multi widget screen.[ ]
Widget list popup appears.
■ [ ]
Displays confirmation message to delete the
current page from the multi widget screen.
For details, see To delete the multi widget
(P.26).
■ []
Adds a page to the multi widget screen.
2 Touch on the widget list popup.[ ]
A new page is added.
NOTE
• You can add up to 2 pages to the multi widget
screen. If you have already added 2 pages, you
cannot select [ ].
• The widget list popup is displayed on the new
page until you place a widget to.
To delete the multi widget
1 Touch on the widget list popup.[ ]
Confirmation message appears.
2 Touch .[ ]YES
Current page is deleted.
NOTE
• You cannot delete the first page of the multi
widget screen.
Widget
27English
Weather Widget
You can display the weather forecast of the
present location on the Home screen.
Preparation
• See KENWOOD Traffic Powered By INRIX
(P.24).
• Select “ON” for Weather Widget. See Widget
SETUP (P.28).
1 Press the / button.[ ]HOME [ ]
2 Flick the widget area to the left/right to
display the weather widget.
Photo Frame Widget
You can display a slideshow of the image files
stored in the USB memory/SD card on the
Home screen.
Ñ Preparation
• Select “ON” for Photo Frame Widget. See
Widget SETUP (P.28).
● Acceptable Picture files
Max. Picture size
JPEG (.jpg, .jpeg) *
15,000 × 5,000
PNG (.png) 1,000 × 1,000
BMP (.bmp) 1,000 × 1,000
• This unit can only play back files which are less
than 50 MB.
• The maximum number of files per device is
500.
• Picture files may not be played depending on
their condition.
*1 A progressive format is not supported.
Ñ Photo Frame
1 Press the / button.[ ]HOME [ ]
2 Flick the widget area to the left/right to
display the photo frame widget.
• Scroll the screen to display the hidden part.
Widget
28
Widget SETUP
Set up the widgets on the Home screen.
1 Press the / button.[ ]MENU [ ]
Popup menu appears.
2 Touch .[ ]SETUP
SETUP screen appears.
3 Touch .[ ]User Interface
User Interface screen appears.
4 Touch [Widget SETUP] in the User
Interface screen.
5 Set each item as follows.
■ [Weather Widget]
Determine whether to use the weather
widget.
"ON" (Default)/"OFF"
■ [Photo Frame Widget]
Determine whether to use the photo frame
widget.
"ON" (Default)/"OFF"
■ [Photo Frame SETUP]
Make settings related to display of the photo
frame widget.
6 Touch .[ ]
To Photo Frame Setup
Make settings related to display of the photo
frame widget.
1 Touch [Photo Frame SETUP] on the
Widget SETUP screen.
2 Set each item as follows.
■ [ ]Sort Order
Specify a file sorting criterion.
"By Name(Ascending)"/
"By Name(Descending)"/
"By Date(Newest First)" (Default)/
"By Date(Oldest First)"
■ [Slide Show Interval]
Specify the slideshow interval.
"5" to "30" seconds.
Default is "5" seconds.
■ [Photo Frame is • • • • •]
Display help topics about the photo frame.
3 Touch .[ ]
Disc
29English
Disc
Playing a disc
Ñ Insert a disc
DNX997XR
1 Press the button.[ ]G
2 Touch .[ ]DISC EJECT
The panel opens.
3 Insert the disc into the slot.
The panel closes automatically.
The unit loads the disc and playback
starts.
DNX697S / DNX577S
1 Insert the disc into the slot.
The unit loads the disc and playback
starts.
Ñ Eject a disc
DNX997XR
1 Press the button.[ ]G
2 Touch .[ ]DISC EJECT
When removing a disc, pull it horizontally.
3 Press the button.[ ]G
The panel closes.
NOTE
• To forcibly eject the disc, press and hold the
[ ] [G button for 2 seconds and then touch DISC
EJECT] after the message is displayed.
DNX697S / DNX577S
1 Press the button.[ ]
Popup menu appears.
2 Touch .[ ]
When removing a disc, pull it horizontally.
NOTE
• This is not displayed on the popup menu screen
of Apple CarPlay or Android Auto source. Change
Apple CarPlay or Android Auto source to other
one to display the popup menu screen.
• To forcibly eject the disc, touch and hold for 2 [ ]G
seconds and then touch after the message [ ]Yes
is displayed.
Disc
30
DVD/VCD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD
mode before starting operation for DVD and VCD,
see Switch the operation mode (P.104).
• The screen shot below is for DVD. It may be
different from the one for VCD.
1 When the operation keys are not
displayed on the screen, touch
7
area.
Control screen
1
2
3
4
5
DVD VCD
2
Video screen
7
6
8
6
1
Information display area
Displays the following information.
• Title # Chapter #, : DVD title and chapter
number
• Track # Scene #:/ VCD track or scene number.
Scene # is displayed only when Playback
control (PBC) is on.
• : Audio formatLinear PCM, etc.
• /OFF Zoom2 – 4 (DVD)/Zoom2 (VCD): Displays
the zoom ratio.
This function can be used from the remote
control. (P.104)
• : Hides the control screen.[ ]Hide
• [ ] : Repeats the current content. Each time
you touch the key, repeat modes are switched
in the following sequence;
DVD: Title repeat ( ), Chapter repeat
( ), Repeat off ( )
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat ( ), Repeat off
( )
2
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• : Stops playback. Touching twice will play I]
the disc from the beginning when you play it
next time.
• [ ] [ ] : Fast-forwards or fast-backward the
disc. Each time you touch the key, the speed
changes. 2 times, 10 times.
• [ ] [ ] (DVD only): Plays in slow motion
forward or backward.
• (DVD only): Touch to display the DVD [ ]SETUP
SETUP screen. See DVD SETUP (P.34).
• (DVD only): Touch to display [ ]MENU CTRL
the DVD-VIDEO disc menu control screen. See
DVD Disc Menu Operation (P.33).
• (VCD only): Touch to turn Playback [ ]PBC
control (PBC) on or off.
• (VCD only): Touch to change audio [ ]Audio
output channels.
• (VCD only): Touch to display [ ]Direct Number
the Direct Number dialog only when Playback
control (PBC) is on. You can directly enter the
track number to play when scene is selected.
• [ ] (VCD only): Returns to the previous scene
only when Playback control (PBC) is on.
3
Play mode indicator/Playing time
• , , , etc.: Current play mode indicatorD B I
Meanings of the icons are as follows: (play), D
B A (fast forward), (fast backward),
I (stop), R (resume stop), (pause), (slow H
playback), (slow reverse playback).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position.
Disc
31English
4
Operation keys
• : Searches for the previous/next [ ]E [ ]F
content.
Touch and hold to fast-forward or fast-
backward the disc. (It will be cancelled
automatically after about 50 seconds.)
• : Plays or pauses.[ ]DH
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
5
Indicator Items
• : Disc insertion status.[ ]IN
White: A Disc is inside the unit.
Orange: Disc player failure.
VCD
• : Identifies the left audio output [ ]1chLL/2chLL
of channel 1 or 2.
• : Identifies the monaural audio [ ]1chLR/2chLR
output of channel 1 or 2.
• : Identifies the right audio [ ]1chRR/2chRR
output of channel 1 or 2.
• : Identifies the stereo audio [ ]1chST/2chST
output of channel 1 or 2.
• : Identifies the left audio output.[ ]LL
• : Identifies the monaural audio output.[ ]LR
• : Identifies the right audio output.[ ]RR
• : Identifies the stereo audio output.[ ]ST
• : The PBC function is on.[ ]PBC
• : The VCD version is 1.[ ]VER1
• : The VCD version is 2.[ ]VER2
6
Searching area
Touch to search for the next/previous content.
7
Key display area
Touch to display the control screen.
8
(DVD only)[ ]MENU CTRL
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation
(P.33).
NOTE
• The control screen disappears when no operation
is done for 5 seconds.
• If you use a remote control, you can jump directly
to the desired image by entering the chapter
number, scene number, etc. .(P.104)
Music CD/Disc media Basic
Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation for Music CD
and audio files, see Switch the operation mode
(P.104).
• In this manual, “Music CD” means a general CD
which includes music tracks.
“Disc media” means a CD/DVD disc which
includes audio or video files.
• The screen shot below is for disc media. It may be
different from the one for CD.
Control screen
7
3
4
5
2
6
1
Open the drawer
5
7
Close the drawer
5
7
6
8
1
[CODEC] [ ] [ ]/ /
• When a high-resolution source is played, its
format information is displayed. (Disc media
only)
Disc
32
• : Repeats the current track/folder. Each [ ]
time you touch the key, repeat mode switches
in the following sequence;
Track/File repeat ( ), Folder repeat ( )
(Disc media only), Repeat all ( )
• [ ] : Randomly plays all tracks in current
folder/disc. Each time you touch the key,
random mode switches in the following
sequence;
Track random ( ) (Music CD only), Folder
random ( ) (Disc media only), Random off
( )
2
Track information
• Displays the information of the current track/file.
Only a file name and a folder name are
displayed if there is no tag information. (Disc
media only)
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen .(P.90)
3
Play mode indicator/Playing time
• , , etc.: Current play mode indicatorD B
Meanings of the icons are as follows: (play), D
B A (fast forward), (fast backward),
H (pause).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position. (Video file only)
4
Operation keys
• (Disc media only) : Searches files. For [ ]1
details on search operation, see File search
Operation (P.33).
• : Searches for the previous/next [ ]E [ ]F
content.
Touch and hold to fast-forward or fast-
backward the disc. (It will be cancelled
automatically after about 50 seconds.)
• : Plays or pauses.[ ]DH
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
5
Content list
• Touch the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
Artwork/VU meter
• Displays/hides artwork area.
• The jacket of the currently playing file is
displayed. (Disc media only)
• Touch to switch between the artwork and VU
meter.
7
Function panel (Disc media only)
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [ ] [ ] : Searches for the previous/next
folder.
8
Indicator Items
• : Disc insertion status.[ ]IN
White: A Disc is inside the unit.
Orange: Disc player failure.
• : Identifies the video file.[ ]VIDEO
• : Identifies the music file.[ ]MUSIC
Video screen
10
99
9
File search area (Video file only)
Touch to search for the next/previous file.
10
Key display area (Video file only)
Touch to display the control screen.
Disc
33English
File search Operation
(Disc media only)
You can search for a file according to hierarchy.
NOTE
• For operations in the list screen, see List screen
(P.20).
1 Touch .[ ]1
Folder List screen appears.
2 Touch the desired folder.
When you touch a folder its contents are
displayed.
3 Touch the desired item in the content list.
Playback starts.
DVD Disc Menu Operation
You can set up some functions using the DVD-
VIDEO disc menu.
1 Touch the framed area during playback.
Menu Control screen appears.
2 Perform your desired operation as
follows.
■ To display the top menu
Touch .*[ ]TOP
■ To display the menu
Touch .*[ ]MENU
■ To display the previous menu
Touch .*[ ]Return
■ To enter selected item
Touch .[ ]Enter
■ To enable direct operation
Touch to enter the highlight [ ]Highlight
control mode .(P.34)
■ To move the cursor
Touch , , , .[ ]R [ ]S [ ]C [ ]D
■ To switch among subtitle languages
Touch . Each time you touch this [ ]Subtitle
key, subtitle languages are switched.
■ To switch among audio languages
Touch . Each time you touch this key, [ ]Audio
audio languages are switched.
Disc
34
■ To switch among picture angles
Touch . Each time you touch this key, [ ]Angle
picture angles are switched.
* These keys may not function depending on
the disc.
Ñ Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
1 Touch on the Menu Control [ ]Highlight
screen.
2 Touch your desired item on the screen.
NOTE
• The highlight control function is cancelled
automatically if you do not operate for a
predetermined period of time.
DVD SETUP
You can set up the DVD playback functions.
1 Touch the framed area during playback.
2 Touch on the left side of the screen. [ ]
Touch .[ ]SETUP
DVD SETUP screen appears.
3 Set each function as follows.
■ [ ] [ ]Menu Language / Subtitle Language /
[ ]Audio Language
See Language setup (P.35).
■ [ ]Dynamic Range Control
Sets the dynamic range.
[ ]Wide : The dynamic range is wide.
[ ]Normal : The dynamic range is normal.
[ ]Dialog (Default): Makes the total sound
volume larger than the volumes in other
modes. This is effective only when the
Dolby Digital software is in use.
Disc
35English
■ [ ]Screen Ratio
Sets the screen display mode.
[ ]16:9 (Default): Displays wide pictures.
[ ]4:3 LB : Displays wide pictures in the Letter
Box format (having black stripes at the top
and bottom of screen).
[ ]4:3 PS : Displays wide pictures in the Pan &
Scan format (showing pictures cut at the
right and left ends).
Ñ Language setup
This setting is for the languages used for the
menu, subtitle, and voice.
1 Touch the desired item;
[ ] [ ]Menu Language , Subtitle Language ,
[ ]Audio Language .
Language Set screen appears.
2 Select a language.
For language codes, refer to DVD
Language Codes (P.124).
Touch Close to set the entered language
and return to the DVD SETUP screen.
NOTE
• To set the DVD’s original language as the audio
language, touch .[ ]Original
APPS
36
APPS
Wireless Mirroring Operation
(DNX997XR)
You can display the same screen of the
Android smartphone on the monitor of the
unit using the Wireless Mirroring function of
the Android smartphone.
Preparation
• You can use the Wireless Mirroring function
with Android smartphones compatible with this
function.
• This function may be called Wireless Display,
Screen Mirroring, AllShare Cast, etc., depending
on the manufacturer.
• The settings on the Android smartphone differ
depending on the device type. For details, refer
to the instruction manual supplied with your
Android smartphone.
• If your Android smartphone is locked, Mirroring
screen may not appear.
• If the Android smartphone is not ready for UIBC,
you cannot perform touch operation.
1 Press the button.[ ]HOME
2 Touch .[ ]
3 Touch [Wireless Mirroring]. (P.17)
The App screen is displayed.
4 Operate your Android smartphone to
activate the Wireless Mirroring function,
then connect to this unit.
5 Select (”DNX997XR”) as the network to
use.
When the connection is established,
then the same screen displayed on the
Android smartphone is displayed.
NOTE
• Apps is discontinued when the power is turned
ON/OFF or you leave the vehicle. To restart Apps,
operate the Android smartphone.
• When the Apps source is displayed, you cannot
register or reconnect a Bluetooth device. Switch
the Apps source to another source, and then
operate the Bluetooth device.
USB Mirroring Operation
With Mirroring for KENWOOD application
installed on your smartphone, you can display
the screen of your smartphone on the screen
of this unit and listen to either the audio of
your smartphone or current source of this unit.
You may access your smartphone from this
unit.
You can use the USB Mirroring function
with your smartphone compatible with this
function.
Compatible devices
• Android smartphone
– Bluetooth support
– Android version 5.0 or later
– Linux Kernel version 3.5 or later
• iPhone
– Bluetooth support
– iOS version 11 or later
Preparation
• Install the latest version of the Mirroring
for KENWOOD application and activate the
application on your smartphone.
[ ]Android smartphone : Search for “Mirroring for
KENWOOD” in Google Play to find and install the
most recent version.
[ ]iPhone : Search for “Mirroring for KENWOOD”
in Apple App Store to find and install the most
recent version.
Mirroring for KENWOOD application is a free
application. You can check “how to” tutorial in
Mirroring for KENWOOD application.
Ñ Connect the device
Screen is mirrored through USB (Black)
terminal connection while audio is shared via
Bluetooth connection between this unit and
your smartphone.
For Android smartphones:
1 Pair your Android smartphone with
this unit via Bluetooth. See Register the
Bluetooth device 73). (P.
Select .A2DP/SPP [ ]Audio/App
APPS
37English
2 Press the / button.[ ]HOME [ ]
3 Touch .[ ]
4 Touch . [ ]USB Mirroring (P.17)
5 Connect your Android smartphone via
the USB (Black) terminal. (P.116)
When you use Mirroring for KENWOOD
application for the first time, the terms
of service are displayed. It is necessary to
agree to the terms of service to use this
function.
For iPhone:
1 Pair your iPhone with this unit via
Bluetooth. See Register the Bluetooth
device 73). (P.
Select .A2DP/SPP [ ]Audio/App
2 Touch “Mirroring for KENWOOD” and start
broadcast.
3 Press the / button.[ ]HOME [ ]
4 Touch .[ ]
5 Touch . [ ]USB Mirroring (P.17)
6 Connect your iPhone using KCA-iP103 via
the USB (Black) terminal. (P.115)
7 Operate your iPhone to complete
followings.
• Launch “Settings”, then touch “Control
Center” and then “Customize Controls”.
• Touch “Screen Recording” and add to
“INCLUDE” list.
• Launch “Control Center” of your iPhone,
then touch and hold Screen Recording
icon.
NOTE
• USB (Gray) terminal does not support USB
Mirroring. (DNX997XR / DNX697S only)
• You cannot use the Bluetooth and iPod sources
at the same time with Mirroring for KENWOOD
application.
• OSD clock is not shown on the mirroring screen
of this unit regardless of the setting made for
[ ]OSD Clock (P.92).
• Depending on the connected Android
smartphone, you may need to enable virtual
keyboard setting on your smartphone to display
software keyboard on the screen of this unit and
on your smartphone.
• Mirroring for KENWOOD application is
discontinued by the following operations if you
use the application with an iPhone:
– Receiving an incoming call
– iPhone's screen recording function is stopped
– iPhone screen is turned off
To resume the mirroring operation, disconnect
the iPhone from the USB Audio cable, and try
connecting it again.
• The audio may be of poor quality, interrupted or
skipped, depending on several conditions such as
network condition, the application and etc.
• If you perform pairing with another device during
mirroring, mirroring (audio and/or video) will be
disturbed or paused.
• Some applications may not support audio
sharing.
• Some operations may not work depending on
the compatibility between this unit, Mirroring for
KENWOOD application and your smartphone.
Ñ Operation keys on the
mirroring screen
On the USB mirroring screen, the following
virtual hard keys are available. The keys are
hidden when no operation is done for about
5 seconds. You can display back them anytime
by touching the screen.
• [ ] [ ]/ : Changes the virtual hard keys position
shown on the screen of this unit.
• : Returns to home page.[ ]○
• : Closes the virtual hard keys.[ ]×
• [ ]: Shows the recent applications (Android
only).
• [ ]: Returns to the previous page (Android
only).
APPS
38
NOTE
• These keys differ depending on the connected
device and may differ from the function operated
from the device.
• These keys can be displayed even if there is no
hard key on the connected device.
Ñ Disconnect mirroring
You can disconnect mirroring by
disconnecting your smartphone from the USB
(Black) terminal from the rear panel.
NOTE
• Once you disconnect from mirroring operations,
stop broadcast on iPhone's screen recording
function. Otherwise “iPod” source and “Bluetooth”
source may not work correctly.
Apple CarPlay Operation
Apple CarPlay is a smarter, safer way to use
your iPhone in the car. Apple CarPlay takes
the things you want to do with iPhone while
driving and displays them on the screen of
the product. You can get directions, make
calls, send and receive messages, and listen to
the music from iPhone while driving. You can
also use Siri voice control to make it easier to
operate iPhone.
For details about Apple CarPlay, visit https://
www.apple.com/ios/carplay/.
Compatible iPhone devices
You can use Apple CarPlay with the following
iPhone models.
• iPhone XS Max
• iPhone XS
• iPhone XR
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
Ñ Connecting an iPhone
Preparation
• To register an iPhone by the connection via the
USB (Black) terminal
– Connect an iPhone via the USB (Black) terminal
and operate the iPhone according to the
confirmation messages displayed on the
iPhone. The iPhone is registered in [Apple
CarPlay Device List]. Removing the iPhone
from the USB (Black) terminal and selecting
the registered iPhone from [Apple CarPlay
Device List], the iPhone will be connected
wirelessly.
• To register an iPhone by the connection via
Bluetooth
– Touching [ ] [ on the Apple CarPlay Device
List] screen , displays Bluetooth (P.39)
pairing waiting dialog. Referring to Register
the Bluetooth device (P.73) and registering
the iPhone, the iPhone will be connected
wirelessly.
Wired connection
1 Connect your iPhone using KCA-iP103 via
the USB (Black) terminal. (P.115)
When an iPhone compatible with Apple
CarPlay is connected to the USB (Black)
terminal, the Bluetooth Hands-Free phone
currently connected is disconnected. If the
Bluetooth Hands-Free phone is being used,
disconnection will occur after ending the
call.
2 Unlock your iPhone.
Wireless connection
(DNX997XR)
You can select the iPhone registered as the
Bluetooth device from [Apple CarPlay Device
List] and use it as the Apple CarPlay device.
1 Press the button.[ ]HOME
2 Touch .[ ]
3 Touch [Apple CarPlay]. (P.17)
APPS
39English
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of an iPhone.
• If two or more iPhones have been registered,
select the iPhone to be used as the [Apple
CarPlay] source. (P.39)
• You can also select the iPhone registered in
[Apple CarPlay Device List] even (P.39)
when the icon is not activated [ ]Apple CarPlay
on the source selection screen.
• It is necessary to connect the GPS antenna and
the speed pulse input in order to use a wireless
Apple CarPlay.
• When the Wi-Fi connection becomes unavailable,
the HOME screen is displayed.
• You cannot use Apple CarPlay if the iPhone's
screen recording function is enabled.
To switch the Current Screen to the
Apple CarPlay Screen When Connecting
Your iPhone
• Touch icon on the source [ ]Apple CarPlay
selection screen. (P.17)
• Touch the following connection message if the
message appears.
NOTE
• The connection message appears when;
– The iPhone you used previously is connected
again.
– The screen other than HOME and the source
selection screen is displayed.
• The connection message is displayed for about
5 seconds.
Ñ Select an Apple CarPlay device
(DNX997XR)
If two or more iPhones compatible with Apple
CarPlay have been registered, select the
iPhone to be used as the Apple CarPlay source.
1 Press the / button.[ ]MENU [ ]
Popup menu appears.
2 Touch .[ ]SETUP
SETUP screen appears.
3 Touch .[ ]AV
4 Touch [Apple CarPlay Device List].
5 Select a device.
The Apple CarPlay device connected via
the USB and the registered Apple CarPlay
devices ready for wireless connection are
displayed.
• : Displays a Bluetooth pairing waiting [ ]
dialog. For details, see Register the Bluetooth
device (P.73).
• [ ] : Displays confirmation message to
disconnect the device.
• [ ] : Displays Device Remove screen.
(P.40)
APPS
40
To delete the registered Apple CarPlay
device
1 Touch .[ ]
2 Touch the device name to check.
■ [ [ ]þ ALL
Selects all Apple CarPlay devices.
■ [ [ ]¨ ALL
Clears all check marks.
3 Touch .[ ]Delete
Confirmation message appears.
4 Touch .[ ]Yes
All the selected device(s) is deleted.
NOTE
• This operation also deletes the same device(s)
from the Bluetooth device list screen. (P.75)
Ñ Operation keys and available
Apps on the home screen of
Apple CarPlay
You can use the Apps of the connected iPhone.
The items displayed and the language used
on the screen differ among the connected
devices.
To enter the Apple CarPlay mode, touch
[Apple CarPlay] icon on the source selection
screen. (P.17)
3
1
2
1
[ ]
*
• Displays the home screen of Apple CarPlay.
• Touch and hold to activate Siri.
2
Application keys
Starts the application.
3
[ ]HOME
Exits the Apple CarPlay screen and displays the
Home screen.
* The icon design may change depending on
the iOS version.
To exit the Apple CarPlay screen
1 Press the / button.[ ]HOME [ ]
Ñ Use Siri
You can activate Siri.
1 Press the button for 1 second.[ ]
DNX997XR
Press for 1 second
APPS
41English
DNX697S / DNX577S
Press for 1 second
2 Talk to Siri.
To deactivate
1 Press the button.[ ]
Ñ Switch to the Apple CarPlay
screen while listening to
another source
1 Press the button.[ ]
DNX997XR
DNX697S / DNX577S
NOTE
• When listening to another source with the Apple
CarPlay screen displayed, playing music in the
Apple CarPlay mode will switch the current
source to the Apple CarPlay source.
Android Auto™ Operation
Android Auto enables you to use the functions
of your Android smartphone convenient
for driving. You can easily access route
guidance, make calls, listen to music, and
access convenient functions on the Android
smartphone while driving.
For details about Android Auto, visit https://
www.android.com/auto/ https://support. and
google.com/androidauto.
Compatible Android smartphones
You can use Android Auto with Android
smartphones of Android version 5.0 or later.
For Wi-Fi connection, Android 8.0 or later.
NOTE
• Android Auto may not be available on all devices
and may not be available in all countries or regions.
●About the placement of smartphone
Install the smartphone connected as Android
Auto device in the place where it can receive
the GPS signals.
When using the Google Assistant, install the
smartphone in the place where the smartphone
easily catch a voice by the microphone.
NOTE
• Do not put the smartphone in a spot exposed
to direct sunlight or near an air blowing out
port of an air conditioner. The placement of
the smartphone in such places can lead to
malfunction or damage of your smartphone.
• Do not leave the smartphone in the vehicle.
Ñ Connect Android smartphone
Wired connection
1 Connect an Android smartphone via the
USB terminal. (P.116)
To use the hands-free function, connect the
Android smartphone via Bluetooth.
When an Android smartphone compatible
with Android Auto is connected to the
USB terminal, the device is connected via
Bluetooth automatically, and the Bluetooth
Hands-Free phone currently connected is
disconnected.
APPS
42
2 Unlock your Android smartphone.
3 Press the / button.[ ]HOME [ ]
4 Touch .[ ]
5 Touch [Android Auto]. (P.17)
Wireless connection
(DNX997XR)
When the Android smartphone is ready for
wireless connection, connecting it via the USB
registers Bluetooth and Wi-Fi automatically.
Thus, the registered Android smartphone will
be able to be connected wirelessly to be used
as an Android Auto source.
1 Press the button.[ ]HOME
2 Touch .[ ]
3 Touch [Android Auto]. (P.17)
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of Android smartphone.
• If two or more Android smartphones have been
registered, select the Android smartphone to be
used as the Android Auto source. (P.42)
• To change the password for wireless connection
manually, refer to [Reset Android Auto Wireless
Connection 94)] (P. .
• When the Wi-Fi connection becomes unavailable,
the HOME screen is displayed.
Ñ Select an Android smartphone
(DNX997XR/DNX697S)
If two or more Android smartphones
have been registered, select the Android
smartphone to be used as the Android Auto
source.
1 Press the / button.[ ]HOME [ ]
2 Touch .[ ]
3 Touch [Android Auto]. (P.17)
4 Press the / button.[ ]MENU [ ]
5 Touch .[ ]
6 Select an Android smartphone.
The registered Android smartphones ready
for wireless connection and the Android
smartphone connected via the USB are
displayed.
Ñ Operation keys and available
Apps on the Android Auto
screen
You can perform the operations of the Apps of
the connected Android smartphone.
The items displayed on the screen differ
among the connected Android smartphones.
To enter the Android Auto mode, touch the
[Android Auto] icon on the source selection
screen. (P.17)
1
1
Application/information keys
Starts the application or displays information.
To exit the Android Auto screen
1 Press the / button.[ ]HOME [ ]
APPS
43English
Ñ Using voice control
1 Press the button for 1 second.[ ]
DNX997XR
Press for 1 second
DNX697S / DNX577S
Press for 1 second
To cancel
1 Press the button.[ ]
Ñ Switch to the Android Auto
screen while listening to
another source
1 Press the button.[ ]
DNX997XR
DNX697S / DNX577S
NOTE
• When listening to another source with the
Android Auto screen displayed, playing music in
the Android Auto mode will switch the current
source to the Android Auto source.
USB/SD
44
USB/SD
Connecting a USB device
1 Connect the USB device with the USB
cable. (P.114)
2 Press the / button.[ ]HOME [ ]
3 Touch .[ ]
4 Touch . [ ]USB (P.17)
Ñ Disconnect the USB device
1 Press the / button.[ ]HOME [ ]
2 Touch a source other than . [ ]USB
3 Detach the USB device.
Ñ Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
●About the file system
The file system should be the one of the
following.
• FAT16 • FAT32 • exFAT • NTFS
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
Inserting the SD
DNX997XR
1 Press the button.[ ]G
2 Touch to the panel fully opens.[ ]OPEN
3 Insert the SD card into the slot until it
clicks.
4 Press the button.[ ]G
5 Press the button.[ ]HOME
6 Touch .[ ]
7 Touch . [ ]SD (P.17)
DNX697S / DNX577S
1 Insert the microSD card into the slot until
it clicks.
2 Press the button.[ ]
3 Touch .[ ]
4 Touch . [ ]SD (P.17)
USB/SD
45English
Ñ Remove the SD card
DNX997XR
1 Press the button.[ ]G
2 Touch to the panel fully opens.[ ]OPEN
3 Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4 Press the button.[ ]G
DNX697S / DNX577S
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.
Ñ Usable SD card
DNX997XR
The unit is capable of playback of SD/SDHC/
SDXC memory cards complying with the SD,
SDHC or SDXC standard. A special adapter is
required to use a miniSD card, miniSDHC card,
microSD card, microSDHC, or microSDXC card.
The MultiMedia Card (MMC) cannot be used.
DNX697S / DNX577S
The unit is capable of playback of microSD/
microSDHC/microSDXC memory cards
complying with the microSD, microSDHC or
microSDXC standard.
USB/SD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
7
4
3
5
2
6
1
Open the drawer
57
Close the drawer
5
7
6
8
1
/ /[ ]CODEC [ ] [ ]
• When a high-resolution source is played, its
format information is displayed.
• [ ] : Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat ( ), Folder repeat ( ), Repeat
all ( )
• [ ] : Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
File random ( ), Random off ( )
USB/SD
46
2
Track information
• Displays the information on the current file.
Only a file name and a folder name are
displayed if there is no tag information.
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen .(P.90)
3
Play mode indicator/Playing time
• , , etc.: Current play mode indicatorD B
Meanings of individual icons are as follows:
D B A (play), (fast forward), (fast
backward), (pause).H
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position. (Video file only)
4
Operation keys
• : Searches track/file. For details on search 1]
operation, see Search Operation (P.47).
• : Searches the previous/next track/E] [ ]F
file.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• : Plays or pauses.[ ]DH
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
5
Content list
• Touch the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
Artwork/VU meter
• Displays/hides artwork area.
• The jacket of the currently playing file is
displayed.
• Touch to switch between the artwork and VU
meter.
7
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [ ] [ ] : Searches for the previous/next
folder.
• [ ]USB DEVICE CHANGE :
Switches to another USB device when two USB
devices are connected.
(DNX997XR / DNX697S only)
8
Indicator Items
• : Identifies the video file.[ ]VIDEO
• : Identifies the music file.[ ]MUSIC
Video screen
10
99
9
File search area (Video file only)
Touch to search for the next/previous file.
10
Key display area (Video file only)
Touch to display the control screen.
USB/SD
47English
Search Operation
You can search music or video files by the
following operations.
1 Touch .[ ]1
2 Touch .[ ]S
3 Select a list type.
NOTE
• For operations on the list screen, see List screen
(P.20).
Ñ Category search
You can search for a file by selecting a
category.
1 Touch .[ ]Category List
2 Select whether you search audio files
or video files .
3 Touch the desired category.
The list corresponding to your selection
appears.
4 Touch to select the desired item in the
list. Repeat this step until you find the
desired file.
Ñ Link search
You can search for a file of the same artist/
album/genre as that in the current track.
1 Touch .[ ]Link Search
2 Touch the desired tag type. You can select
from artists, albums and genres.
The list corresponding to your selection
appears.
3 Touch the desired item in the content list.
Ñ Folder search
You can search for a file according to hierarchy.
1 Touch .[ ]Folder List
2 Touch the desired folder.
When you touch a folder its contents are
displayed.
3 Touch to select your desired item in the
list. Repeat this step until you find the
desired file.
iPod/iPhone
48
iPod/iPhone
Preparation
Ñ Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone XS Max
• iPhone XS
• iPhone XR
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPod touch (6th
generation)
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.kenwood.com/cs/ce/ipod/.
• By connecting your iPod/iPhone to this unit with
the iPod connection cable KCA-iP103 (optional
accessory), you can supply power to your iPod/
iPhone as well as charge it while playing music.
Note that the power of this unit must be held on.
• If you restart playback after connecting the iPod,
the music that has been played by the iPod is
played first.
Ñ Connect iPod/iPhone
Wired connection
Preparation
• Connect an iPod/iPhone with the KCA-iP103
(optional accessory) while Apple CarPlay is not
connected.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
• Plug the iPod/iPhone into the gray USB terminal
with the KCA-iP103 (optional accessory).
(DNX997XR / DNX697S only)
• Plug the iPod/iPhone into the USB terminal with
the KCA-iP103 (optional accessory).
(DNX577S only)
• Only one iPod/iPhone can be connected.
1 Connect the iPod/iPhone using the KCA-
iP103. (P.115)
2 Press the / button.[ ]HOME [ ]
3 Touch .[ ]
4 Touch . [ ]iPod (P.17)
●To disconnect the iPod/iPhone connected
with the cable:
1 Detach the iPod/iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.73) Connect the and
Bluetooth device (P.74).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPod/iPhone are not connected
via USB.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
iPod/iPhone Basic Operation
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
4
2
3
5
1
iPod/iPhone
49English
Open the drawer
6
5
2
Close the drawer
5
7
2
1
Track information
• Displays the information on the current file.
• Touch to display the category list screen. See
Category search (P.50).
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen .(P.90)
2
Artwork/VU meter
• Displays/hides artwork area.
• The jacket of the currently being played file is
displayed.
• Touch to switch between the artwork and VU
meter.
3
Play mode indicator/Playing time
• , , etc.: Current play mode indicatorD B
Meanings of individual icons are as follows:
D B A (play), (fast forward), (fast
backward), (pause).H
4
Operation keys
• : Searches for a track/file. For details on 1]
search operation, see Search Operation
(P.49).
• : Searches for the previous/next E] [ ]F
track/file.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• : Plays or pauses.[ ]DH
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
5
Content list
• Touch the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
/[ ] [ ]
• [] : Repeats the current track/album. Each
time you touch the key, repeat modes are
switched in the following sequence:
Song repeat ( ), All songs repeat ( ),
Repeat off ( )
• [ ] : Randomly plays all tracks in the current
album. Each time you touch the key, random
modes are switched in the following sequence:
Song random ( ), Random off ( )
7
Indicator Items
• : Identifies the music file.[ ]MUSIC
Search Operation
You can search music files by the following
operations.
1 Touch .[ ]1
2 Touch .[ ]S
3 Select a list type.
NOTE
• For operations on the list screen, see List screen
(P.20).
iPod/iPhone
50
Ñ Category search
You can search for a file by selecting a
category.
1 Touch .[ ]Category List
2 Touch the desired category.
The list corresponding to your selection
appears.
3 Touch to select the desired item in the
list. Repeat this step until you find the
desired file.
Ñ Link search
You can search for a file of the same artist/
album/genre/composer as that in the current
track.
1 Touch .[ ]Link Search
2 Touch the desired tag type. You can
select from artists, albums, genres and
composers.
The list corresponding to your selection
appears.
3 Touch the desired item in the content list.
Radio
51English
Radio (DNX577S)
Radio Basic Operation
Most functions can be controlled from the
source control screen.
To listen to the Radio source, touch [ ]Radio
icon on the source selection screen. (P.17)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
3
4
5
6
2
1
Open the drawer
4
6
Close the drawer
7
6
4
1
Information display
• Displays the information on the current station:
Frequency
Touching [ ] allows you to switch between
Content A and Content B.
Content A: PS name, Radio Text, Title & Artist
Content B: PTY Genre, Radio Text plus
Preset#: Preset number
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen .(P.90)
2
Seek mode
Touch to switch seek mode in the following
sequence: [AUTO1 AUTO2 MANUAL] [, ] [, ].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations one
after another.
• : Switches to the next frequency [ ]MANUAL
manually.
3
Operation keys
• : Tunes in a station. The method of [ ]E [ ]F
switching frequencies can be changed (see
2
Seek mode).
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
4
Preset list
• Touching [ ] [ ]/ allows you to change the
display size.
• Recalls the memorized station.
• When touched for 2 seconds, stores the
currently being received station in the
memory.
5
Band keys
Switches bands (between FM and AM).
6
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• (FM only) : Selects the traffic information [ ]TI
mode. For details, see Traffic Information
(P.53).
• : Presets stations automatically. For [ ]AME
details, see Auto memory (P.52).
Radio
52
• (FM only) : Searches for a program by [ ]PTY
program type. For details, see Search by
program type (P.53).
• (FM only) : Selects the Monaural [ ]MONO
reception mode.
7
Indicator Items
• : A stereo broadcast is being received.[ ]ST
• : The forced monaural function is [ ]MONO
active.
• : Indicates the reception state of traffic [ ]TI
information.
White: TP is being received.
Orange: TP is not being received.
Memory Operation
Ñ Auto memory
You can store stations with good reception in
the memory automatically.
1 Touch desired band key.
2 Touch on the left side of the screen. [ ]
Touch .[ ]AME
3 Touch .[ ]Yes
Auto memory starts.
Ñ Manual memory
You can store the currently being received
station in the memory.
1 Select the station you wish to store in the
memory.
2 Touch (#:1-15) or (#:1-5) in [ ]FM# [ ]AM#
which you want to store the station for 2
seconds until a beep sounds.
Radio
53English
Selecting Operation
Ñ Preset select
You can list and select memorized stations.
1 Touch on the right side of the screen. [ ]
Select a station from the list.
Ñ Search by program type
(FM only)
You can tune in the station broadcasting the
specified type of program when listening to
FM.
1 Touch on the left side of the screen. [ ]
Touch .[ ]PTY
TUNER PTY Mode screen appears.
2 Select a program type from the list.
3 Touch .[ ]Search
You can search for the station broadcasting
the selected type of program.
Traffic Information (FM only)
You can listen to and watch traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes TI
information.
1 Touch on the left side of the screen. [ ]
Touch .[ ]TI
Traffic information mode is set.
Ñ When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to turn on the Traffic Information
function in order to allow the Traffic Information
screen to appear automatically.
• The volume setting made during reception of
traffic information is automatically memorized.
When the traffic information is received next time,
this unit recalls the volume setting automatically.
• To cancel Traffic Information: Touch [ ]Cancel .
HD Radio™ Tuner
54
HD Radio™ Tuner (DNX997XR / DNX697S)
HD Radio Tuner Basic
Operation
Most functions can be controlled from the
source control screen.
To listen to the HD Radio source, touch [HD
Radio] icon on the source selection screen.
(P.17)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
• HD Radio broadcasting is for North American
sales area only.
• The screen shot below is for tuner. It may be
different from the one for HD Radio broadcasting.
Control screen
4
3
5
6
2
1
Open the drawer
46
Close the drawer
3
7
6
8
4
9
1
Information display
• Displays the information on the current station:
Frequency and Channel
Touching [ ] allows you to switch between
Content A, Content B and Content C.
Content A: Station name, Song Title, Artist
Name
Content B: Station Message, Radio Text
Content C: PTY Genre, Album Name
• Change the text size of the information smaller
when the "Small Audio Text" is set to "ON" in
the User Interface screen .(P.90)
2
Seek mode
Touch to switch seek mode in the following
sequence: [AUTO1 AUTO2 MANUAL] [, ] [, ].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations one
after another.
• [MANUAL]: Switches to the next frequency
manually.
3
Picture
• Displays/hides picture area.
• The picture data or station Logo data is
displayed if available from current content.
4
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [10key Direct]: Display the direct station/
channel search screen. For details, see Direct
search (P.57).
• : Presets stations automatically. For [ ]AME
details, see Auto memory (P.56).
• : Change the HD Radio reception mode. [ ]RCV
For details, see Receive Mode (P.56).
• (FM only): Searches for a program by [ ]PTY
program type. For details, see Search by
program type (P.57).
• [ ] : Stores the information about the song
being received. See Bookmark (P.58).
• : Turn on or off the alert [ ]Emergency Alerts
message. See Alert Message (P.59).
• : Displays the alert [ ]Alert Message Log
message received. See Alert Message
(P.59).
HD Radio™ Tuner
55English
5
Operation keys
• : Tunes in a station. The method of [ ]E [ ]F
switching frequencies can be changed (see
2
Seek mode).
• : Selects a channel.[ ]CHS [ ]CHR
• : Display the Channel List screen. See [ ]1
Channel search (P.57).
• : Display a list of registered bookmarks. [ ]
See Bookmark list (P.58).
• [ ] : Displays the Graphic Equalizer screen.
(P.98)
6
Preset list
• Touching [ ] [ ]/ allows you to change the
display size.
• Recalls the memorized station or channel.
• When touched for 2 seconds, stores the
currently being received station or channel in
the memory.
7
Indicator display
While receiving an HD Radio station, it lights
with orange when the audio is digital and lights
with gray when it is analog. While receiving an
analog station, it is off.
8
Band keys
Switches bands (between FM and AM).
9
Indicator Items
• : A multicast digital broadcast is being [ ]MC
received.
• [ANALOG]: An analog broadcast is being
received.
• [DIGITAL]: A digital broadcast is being received.
• : A stereo broadcast is being received.[ ]ST
• : [ ]EA
White: Emergency Alert is on.
No light: Emergency Alert is off.
Orange: Interrupting or in snooze/ignore
state.
• Adjacent to traditional main stations are
HD2/HD3 Channels, providing new original
programming on the FM dial
• A music & product discovery feature that
enables users to store information about
content on the radio, and can deliver
interactive information via QR codes
• Crystal clear, CD-like digital audio quality to
consumers; eliminates background noise
• Provides song name, artist, station ID, and
other relevant data to enrich the listening
experience
• Visual images, such as album art of over-the-air
broadcasts from HD Radio stations
• Delivers critical and life-saving messages to the
public during emergency situations
Produkt Specifikationer
| Mærke: | Kenwood |
| Kategori: | Navigator |
| Model: | DNX577S |
Har du brug for hjælp?
Hvis du har brug for hjælp til Kenwood DNX577S stil et spørgsmål nedenfor, og andre brugere vil svare dig
Navigator Kenwood Manualer
16 August 2024
5 August 2024
5 August 2024
4 August 2024
3 August 2024
3 August 2024
2 August 2024
1 August 2024
27 Juli 2024
27 Juli 2024
Navigator Manualer
- Navigator SilverCrest
- Navigator Acer
- Navigator Honda
- Navigator BMW
- Navigator Toyota
- Navigator Opel
- Navigator Sony
- Navigator Mazda
- Navigator Audi
- Navigator Volkswagen
- Navigator Philips
- Navigator Pioneer
- Navigator Lowrance
- Navigator HP
- Navigator Harman Kardon
- Navigator Becker
- Navigator Garmin
- Navigator Sanyo
- Navigator Grundig
- Navigator Volvo
- Navigator Motorola
- Navigator Asus
- Navigator Bushnell
- Navigator Pyle
- Navigator Humminbird
- Navigator Sygic
- Navigator Thomson
- Navigator Skoda
- Navigator Nokia
- Navigator Mio
- Navigator Blaupunkt
- Navigator JVC
- Navigator Uniden
- Navigator Hitachi
- Navigator Medion
- Navigator Alpine
- Navigator Navman
- Navigator Parrot
- Navigator Packard Bell
- Navigator Kapsys
- Navigator Zebra
- Navigator Jensen
- Navigator VDO
- Navigator Zenec
- Navigator Kalkhoff
- Navigator TomTom
- Navigator Cobra
- Navigator Binatone
- Navigator Dual
- Navigator GlobalSat
- Navigator Celestron
- Navigator Overmax
- Navigator Midland
- Navigator Alfa Romeo
- Navigator Raymarine
- Navigator Simrad
- Navigator MaxCom
- Navigator Chrysler
- Navigator Furuno
- Navigator Navitel
- Navigator Caliber
- Navigator Lark
- Navigator Teasi
- Navigator GoClever
- Navigator Clarion
- Navigator V7
- Navigator Airis
- Navigator Audiovox
- Navigator Rand McNally
- Navigator Navigon
- Navigator IGo
- Navigator Magellan
- Navigator Scosche
- Navigator Prestigio
- Navigator Boss
- Navigator Camos
- Navigator Coyote
- Navigator Insignia
- Navigator Eagle
- Navigator Xomax
- Navigator Sylvania
- Navigator Marquant
- Navigator Lanzar
- Navigator GolfBuddy
- Navigator Soundstream
- Navigator VDO Dayton
- Navigator Dashmate
- Navigator Route 66
- Navigator Falk
- Navigator Seecode
- Navigator Nav N Go
- Navigator Pharos
- Navigator Viamichelin
- Navigator ModeCom
- Navigator Xzent
- Navigator CarTrek
- Navigator Whistler
- Navigator ESX
- Navigator Dynavin
- Navigator Cheetah
- Navigator Cydle
- Navigator LXNAV
- Navigator Planet Audio
- Navigator Eclipse
- Navigator Voice Caddie
- Navigator SkyCaddie
- Navigator TELE System
- Navigator IZZO Golf
- Navigator Zoleo
- Navigator Izzo
Nyeste Navigator Manualer
18 Januar 2025
10 Januar 2025
31 December 2025
30 December 2025
29 December 2024
29 December 2024
14 December 2024
14 December 2024
8 December 2024
8 December 2024