Kenwood KVL6010T Chef Sense XL Manual

Kenwood Foodprocessor KVL6010T Chef Sense XL

Læs nedenfor 📖 manual på dansk for Kenwood KVL6010T Chef Sense XL (210 sider) i kategorien Foodprocessor. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/210

HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH

5720000183/1

English 3 - 11

Nederlands 12 - 22

Français 23 - 33

Deutsch 34 - 44

Italiano 45 - 55

Português 56 - 66

Español 67 - 77

Dansk 78 - 88

Svenska 89 - 98

Norsk 99 - 108

Suomi 109 - 119

Türkçe 120 - 129

Ïesky 130 - 140

Magyar 141 - 151

Polski 152 - 163

Ekkgmij 164 - 176

Slovenčina 177 - 188

Українська 189 - 201

TYPE KVC50 (Chef)

TYPE KVL60 (Chef XL)

instructions

br bs

´¸∂w

202 - 012

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:02 Page 1

Know your Kenwood Kitchen Machine

Congratulations on buying a Kenwood. With such a wide range of attachments

available, it’s more than just a mixer. It’s a state-of-the-art Kitchen Machine. We hope

you’ll enjoy it.

Robust. Reliable. Versatile. Kenwood.

Safety

●Read these instructions carefully and retain for future

reference.

●Remove all packaging and any labels.

●Turn the speed control to ‘O’ OFF position and unplug before

fitting or removing tools/attachments, after use and before

cleaning.

●Keep your fingers away from moving parts and fitted

attachments.

●Never leave the Kitchen Machine unattended when it is

operating.

●Never use a damaged appliance. Get it checked or repaired:

see ‘service and customer care’ section.

●Never operate the Kitchen Machine with the head in the raised

position.

●Never let the cord hang down where a child could grab it.

●Never let the power unit, cord or plug get wet.

●Never use an unauthorised attachment or more than one

attachment at once.

●Never exceed the quantities stated in the maximum capacity

chart .

●When using an attachment, read and follow the safety

instructions that are supplied with it.

●Take care when lifting this appliance as it is heavy. Ensure the

head is correctly latched in the down position and that the

bowl, tools, outlet covers and cord are secure before lifting.

English



















5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:02 Page 5

Before plugging in

• Make sure your electricity supply is the

same as the one shown on the

underside of your machine.

• This appliance conforms to EC directive

2004/108/EC on Electromagnetic

Compatibility and EC regulation no.

1935/2004 of 27/10/2004 on materials

intended for contact with food.

Before using for the first time

• Wash the parts: see ‘care and cleaning’

section.

●Ensure the cord is fully unfolded from the cord storage

compartment bm before using the Kitchen Machine.

●Children should be supervised to ensure that they do not play

with the appliance.

●Do not move or raise the mixer head with an attachment fitted

as the Kitchen Machine could become unstable.

●Do not operate your appliance near the edge of a work

surface.

●Appliances can be used by persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and if they

understand the hazards involved.

●Misuse of your appliance can result in injury.

●This appliance shall not be used by children. Keep the

appliance and its cord out of reach of children.

●Only use the appliance for its intended domestic use.

Kenwood will not accept any liability if the appliance is subject

to improper use, or failure to comply with these instructions.

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:06 Page 4

Key

Attachment outlets

1high-speed outlet

2slow-speed outlet

3bowl tool socket

Mixer

4high speed outlet cover

5mixer head

6head release lever

7speed and pulse control

8standby button

9power unit

bk bowl

bl slow speed outlet cover

bm cord storage compartment

bn K-beater

bo whisk

bp dough hook

bq spatula

br head shield

bs splashguard

Note: Spanner bl shown is for illustration

purposes only and is not supplied in pack.

Optional attachments

There are a range of optional attachments

available to use with your Kitchen Machine.

See the attachment leaflet included in your

pack or visit www.kenwoodworld.com to

see the full range and how to buy an

attachment not included in your pack.

Note: Slow Speed outlet attachments

The slow speed outlet on your Kitchen

Machine model features the Twist

Connection System. It is designed to

accept Twist Connection System

attachments.

When purchasing new attachments for the

slow speed outlet you should check

compatibility with your Kitchen Machine. All

Twist Connection System attachments can

be identified by the product code which

starts with KAX and also by the Twist logo

which is visible on packaging. For more

information visit

www.kenwoodworld.com/twist.

If you own attachments featuring the Bar

Connection System you will need to

use the KAT002ME adaptor supplied in

your pack to connect these to the Twist

Connection System on your Kitchen

Machine. (Refer to “Using the Adaptor”

section for how to fit the adaptor.)

For more information visit

www.kenwoodworld.com/twist.

Know your Kitchen Machine

K-beater

For making cakes, biscuits, pastry, icing,

fillings, éclairs and mashed potato.

Whisk

For eggs, cream, batters, fatless sponges,

meringues, cheesecakes, mousses,

soufflés. Don’t use the whisk for heavy

mixtures (e.g. creaming fat and sugar) -

you could damage it.

Dough Hook

For yeast mixtures only.

The bowl tools and some of their uses

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:06 Page 5

To use your bowl tools

Ensure the cord is fully unfolded from the

cord storage compartment bm before

using the Kitchen Machine.

1 Plug in and the Standby Button 8will

light up.

Note: The standby button light 8will

flash and the Kitchen Machine will

not operate if the mixer head is in

the raised position or the speed

control is not in the ‘O’ position.

Before operating, check that the

mixer head is correctly latched down

and the speed control is in the ‘O’

position. If the light continues to

flash refer to the ‘troubleshooting

guide’.

2 Push the head-lift lever 1down and

raise the mixer head until it locks 2.

3 Fit the bowl on the base and turn

clockwise 3to secure in position .

4 Place the required tool into the socket.

Then push up 4and turn 5the tool to

lock into position.

Note: If the K-beater or Whisk are not

picking up ingredients from the bottom

of the bowl refer to the “Tool Adjustment”

section.

5 Lower the mixer head by pushing the

head release lever down 6and lower

the mixer head until it locks 7.

6 Start the machine by turning the speed

control 7to the desired speed setting.

Use the pulse (P) position for short

bursts of maximum speed.

7 After use, return the speed control to ‘O’

OFF position and unplug your Kitchen

Machine.

8 Release the tool by turning clockwise to

unlock from the tool socket and then

remove.

Hints

• To fully incorporate the ingredients stop

mixing and scrape down the bowl with

the spatula frequently.

• For best results when whisking use eggs

at room temperature.

• Before whisking egg whites, make sure

there is no grease or egg yolk on the

whisk or bowl.

• Use cold ingredients for pastry unless

your recipe says otherwise.

Points for bread making

Important

• Never exceed the maximum capacities

stated - you may overload the machine.

• If you hear the machine labouring, switch

off, remove half the dough and do each

half separately.

• The ingredients mix best if you put the

liquid in first.

Yeast

•Dried yeast (the type that needs

reconstituting): pour the warm water into

the bowl. Then add the yeast and the

sugar and leave to stand for about 10

minutes until frothy.

•Fresh yeast: crumble into the flour.

•Other types of yeast: follow the

manufacturer’s instructions.

• Put the dough into a greased polythene

bag or a bowl covered with a tea towel.

Then leave somewhere warm until

doubled in size.

Important

Ensure that no bowl tools are fitted or

stored in the bowl when using other

outlets.

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:06 Page 6

To assemble

The splashguard assembly consists of 2

pieces: the head shield br and the

splashguard bs.

The splashguard cannot be fitted to the

bowl unless the shield is fitted.

1 Raise the mixer head until it locks.

2 Clip the head shield upwards onto the

underside of the mixer head 8until fully

located.

3 Fit the bowl onto the base.

4 Lower the mixer head.

5 Rest the splashguard on the bowl rim

and then slide forward until fully located

• During mixing, ingredients can be added

directly to the bowl via the feed chute.

6 To remove the splashguard simply slide it

away from the mixer bowl.

7 To remove the head shield, raise the

mixer head until it locks. Remove the tool

if fitted, then pull the head shield

downwards from the underside of the

mixer head.

Note: Only fit or remove the splashguard

when the mixer head is in the locked

position.

We recommend that the head shield

is removed regularly from the mixer

head for cleaning.

K-beater & Whisk

The tools are set to the correct height for

the bowl supplied in the factory and should

not require adjustment.

However, if you wish to adjust the tool use

a suitable sized spanner:

TYPE KVC50 = 17mm

TYPE KVL60 = 19mm

Then follow the instructions below:

1 Unplug the appliance.

2 Raise the mixer head and insert the

whisk or beater.

3 Lower the mixer head. If the clearance

needs to be adjusted, raise the mixer

head and remove the tool. Ideally the

whisk and K-beater should be almost

touching the bottom of the bowl bk.

4 Using a suitable spanner loosen the nut

sufficiently to allow adjustment of the

shaft bl. To lower the tool closer to the

bottom of the bowl, turn the shaft anti-

clockwise. To raise the tool away from

the bottom of the bowl turn the shaft

clockwise.

5 Re-tighten the nut.

6 Fit the tool to the mixer and lower the

mixer head. (Check its position see

points above).

7 Repeat the above steps as necessary

until the tool is set correctly. Once this is

achieved tighten the nut securely.

• Note: Spanner bl shown is for

illustration purpose only.

Dough Hook

This tool is set at the factory and should

require no adjustment.

To fit and use your

Splashguard Tool Adjustment

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:06 Page 8

Using the KAT002ME Adaptor

123

Using the Adaptor

1 Lift off the slow speed outlet cover by

pressing the top and lifting off 1.

2 With the adaptor in the position shown

(K logo on top), locate to the slow speed

outlet and rotate to lock in place 2. The

locking screw should be facing forward.

• Note: Before attempting to fit an

attachment, check inside the adaptor to

ensure the locking screw is unwound far

enough to allow the attachment to be

inserted.

3 Insert the attachment (turning both ways

until it locates), then turn the locking

screw 3anti-clockwise to lock in

position .

4 Refer to the individual attachment

manual for usage instructions.

5 Reverse the above procedure to remove

the attachment from the adaptor.

Cleaning

• Always remove the attachment from the

adaptor before cleaning the parts.

• The adaptor should only be wiped over

with a damp cloth and should not be

immersed in water. Do not place the

adaptor in the dishwasher.

5720000183 Iss 1 KVC50_KVL60 multi_5720000173 Iss 1 KVC50_KVL60 Eng_Arabic 20/05/2014 08:06 Page 9

Produkt Specifikationer

Mærke:	Kenwood
Kategori:	Foodprocessor
Model:	KVL6010T Chef Sense XL

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood KVL6010T Chef Sense XL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Foodprocessor Kenwood Manualer

Kenwood kMix KMX97 Manual

12 Januar 2025

Kenwood MultiPro XL Weigh+ FDM72 Manual

24 December 2024

Kenwood KMM063 Manual

8 Oktober 2024

Kenwood MultiPro Classic FDM780 Manual

4 Oktober 2024

Kenwood FDP613WH Manual

3 Oktober 2024

Kenwood MultiPro Go FDP22 Manual

21 August 2024

Kenwood FP720 Manual

18 August 2024

Kenwood Multipro Classic FP730 Manual

13 August 2024

Kenwood Chef Elite KVC5401S Manual

9 August 2024

Kenwood KMC050 Manual

6 August 2024

Foodprocessor Manualer

Nyeste Foodprocessor Manualer

Hobart 84145 Manual

7 Marts 2025

Westinghouse WHFPR01SS Manual

3 Marts 2025

Braun MultiPractic 3 CH3011 Manual

27 Februar 2025

Trisa Chop n' Mix 6915 Manual

25 Februar 2025

Duronic CH57 Manual

13 Februar 2025

Tefal La Moulinette DPA133 Manual

12 Februar 2025

TriStar MX-4804 Manual

15 Januar 2025

Create CHEF CHOP Manual

14 Januar 2025

Bredeco BCPM-1200-EXP Manual

14 Januar 2025

Bredeco BCPM-1200R Manual

14 Januar 2025